FourStarGroup 11210630V User manual

11210630V
COFFEE TABLE
V

2
PARTS AND HARDWARE
1 LONG TUBE (4 PCS)
2 INSERT CAP (4 PCS)
3 LEG (4 PCS)
A TOP PANEL (1 PC)
B BOTTOM SHELF (1 PC)
RUBBER MALLET
BEFORE YOU BEGIN, PLEASE READ ASSEMBLY INSTRUCTIONS CAREFULLY.
FOLLOW THEM STEP BY STEP.
OPTIONAL ASSEMBLY TOOL
CAUTION :
1. ADULT SUPERVISION IS REQUIRED DUE TO SMALL PARTS. CARE SHOULD BE
TAKEN IN THE UNPACKING AND ASSEMBLY OF THE PRODUCT.
2. ASSEMBLE ON SOFT SURFACES TO PREVENT DAMAGE TO THE PRODUCT FINISH.
3. MAKE SURE ALL PARTS ARE INCLUDED BEFORE ASSEMBLY.
A
B

3
ASSEMBLY INSTRUCTIONS
STEP 1
PRESS INSERT CAPS ( 2 ) INTO TOP PANEL ( A ) AS SHOWN
2
2
22
A
2 INSERT CAP - 4 PCS
INSERT CAP INSERT CAP
USING EITHER A SOFT RUBBER MALLET OR BY FIRMLY PRESSING THE
INSERT CAPS INTO THE TOP PANEL USING THE FLAT SIDE OF A BOOK OR
OTHER HARD FLAT SUREFACE TO PRESS THE CAPS INTO THE PANEL.

4
STEP 2
ATTACH 4 LONG TUBES ( 1 ) INTO TOP PANEL ( A ) AND THEN
ATTACH BOTTOM SHELF ( B ) WITH LEGS ( 3 ) AS SHOWN.
Do you have any questions ? Missing small parts or hardware ?
If you need assistance with the assembly of your COFFEE TABLE
please e-mail our Customer Service
Department at:
[email protected]
or call us at [phone]
or [phone]
Please include the following information in your email:
• Where item was purchased
• Item, model, style or SKU number listed on instructions
or box
• Part number, description of the part and quantity needed
This information will help us get the proper part to you faster
3
3
3
3
A
B
1
11
1
3 LEG - 4 PCS
1 LONG TUBE - 4 PCS
This unit is intended for use only with the
products and maximum weights indicated. Use
with other products or products heavier than the
maximum weights indicated may result in
instability causing possible injury. Furniture can
tip over or break if improperly moved. Have a
friend help to lift and carry the unit to it's new
location.
186 lbs.
88.5 lbs.