FourStarGroup 11223134C User manual

MODEL: 11223134C
EXECUTIVE CHAIR
FOR HOUSEHOLD USE ONLY

2
IMPORTANT SAFEY INSTRUCTIONS
Definitions
Whenever used, the following terms identify safety and property damage messages
and designate a level of hazard seriousness.
This is the safety alert symbol. It alerts you to potential personal injury hazards.
Obey all safety messages that follow this symbol to avoid possible injury or death.
DANGER- Indicates an imminently hazardous situation which if not avoided, will
result in death or serious injury. Usage of this signal word is limited to the most
extreme situations.
WARNING-Indicates a potentially hazardous situation which if not avoided, could
result in death or serious injury.
CAUTION- Indicates a potentially hazardous situation which if not avoided, could
result in minor/moderate injury.
NOTICE- Addresses practices not related to personal injury, such as product
and/or property damage.
READ ALL INSTRUCTIONS BEFORE USE
WARNING—To reduce the risk of fire, electric shock, or serious personal injury.
• Do not exceed the maximum weight limit of 220lbs(100kg) on the product.
• Do not sit on either Armrest.
• Do not step or stand on the product.
CAUTION—To reduce the risk of personal injury;
• Make sure the product is properly assembled and all parts secured before
sitting on it.
• Regularly inspect the chair for loose Bolts, damage, instability or wear.
Tighten any loose Bolts and make sure all parts are secure.
• This product is intended solely for indoor, non commercial use in supporting
a seated individual whose weight doses not exceed 220lbs. No not use the
product outdoors or for any other purpose.
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.

PARTS LIST AND HARDWARE
3
A
B
C
D
E
F
G
H
I
J
K
CASTER 5PCS
BASE 1PC
GAS LIFT 1PC
TELESCOPIC COVER 1PC
BOLT 12PCS
BOLT CAP 8PCS
SEAT PLATE 1PC
BACK CUSHION 1PC
SEAT 1PC
ARMREST 2PCS
ALLEN WRENCH 1PC

ASSEMBLY INSTRUCTIONS
4
STEP 1.
ATTACH THE CASTERS (A) ONTO BASE (B), ATTACH GAS
LIFT(C) AND TELESCOPIC COVER (D) AND PLACE ONTO THE
GAS LIFT (C) AS SHOWN.
CAUTION:
1. READ THIS INSTRUCTION MANUAL BEFORE YOU ASSEMBLE.
2. ASSEMBLE ON A SOFT SURFACE TO PREVENT DAMAGE TO
FINISH OF CHAIR.
3. IT IS RECOMMENDED THAT TWO PEOPLE ASSEMBLE
TOGETHER.

5
STEP 3.
ATTACH BACK CUSHION (H) AND SEAT (I) WITH ARMRESTS (J)
USING BOLTS (E) WITH ALLEN WRENCH (K) AS SHOWN.
STEP 2.
ATTACH SEAT PLATE (G) TO SEAT (I) USING BOLTS (E) WITH
ALLEN WRENCH (K) AS SHOWN, MAKE SURE THE “FRONT”
LABEL ON THE SEAT PLATE (G) ACES TOWARD THE “FRONT”
LABEL ON THE SEAT (I).

6
STEP 4.
INSERT (STEP 1) FINISHED PARTS INTO THE HOLES IN THE
UNDERSIDE OF (STEP 2) FINISHED PARTS AS SHOWN.
STEP 5.
PLACE THE BOLT CAPS (F) ONTO THE ARMRESTS BOLTS
AS SHOWN.
HEIGHT ADJUSTMENT:
TO LOWER THE SEAT, SIT ON IT AND PULL
UP ON THE HEIGHT ADJUSTMENT LEVER.
TO RAISE THE SEAT, REMOVE ALL WEIGHT
FROM IT AND PULL UP ON THE HEIGHT
ADJUSTMENT LEVER.
Do you have any questions? Missing small parts or hardware?
If you need assistance with the assembly of your
EXECUTIVE CHAIR
please e-mail our Customer Service Department at:
[email protected]
or call us at [phone] or [phone]
Please include the following information in your email:
• Where item was purchased
•
Item, model, style or SKU number listed on instructions or box
• Part number, description of the part and quantity needed
This information will help us get the proper part to you faster
HEIGHT ADJUSTMENT LEVER