Foxconn T70S Series User manual

T70S Series
Motherboard
User’s Manual

Statement:
This manual is the intellectual property of Foxconn, Inc. Although the infor-
 mationinthismanualmaybechangedormodiedatanytime,Foxconn
does not obligate itself to inform the user of these changes.
Trademark:
All trademarks are the property of their respective owners.
Version:
User’s Manual V1.0 for T70S Series motherboard.
Symbol description:
Note:
Refers to important information that can help you to use motherboard better,
and tells you how to avoid problems.
Caution:
Indicating a potential risk of hardware damage or physical injury may exist.
WEEE:
The use of this symbol indicates that this product may not be treated as
household waste. By ensuring this product is disposed of correctly, you
will help prevent potential negative consequences for the environment
and human health, which could otherwise be caused by inappropriate waste
handling of this product. For more detailed information about recycling of
 thisproduct,pleasecontactyourlocalcityofce,yourhouseholdwaste
disposal service or the shop where you purchased this product.
More information:
If you want more information about our products, please visit:
http://www.foxconnchannel.com
© All rights reserved.
All trade names are registered trademarks of respective manufacturers listed.
Allimagesareforreferenceonly,pleaserefertothephysicalmotherboardforspecicfeatures.
CAUTIO
N

Declaration of conformity
HON HAI PRECISION INDUSTRY COMPANY LTD
66 , CHUNG SHAN RD., TU-CHENG INDUSTRIAL DISTRICT,
TAIPEI HSIEN, TAIWAN, R.O.C.
declares that the product
Motherboard T70S Series
is in conformity with
(referencetothespecicationunderwhichconformityisdeclaredin
accordance with 89/336 EEC-EMC Directive)
■EN55022:1998/A2:2003 Limitsandmethodsofmeasurementsofradio  
disturbance characteristics of information technology
equipment
■EN61000-3-2/:2000 Electromagneticcompatibility(EMC)
Part 3: Limits
 Section2:Limitsforharmoniccurrentemissions
(equipment input current <= 16A per phase)
■EN61000-3-3/A1:2001 Electromagneticcompatibility(EMC)
Part 3: Limits
 Section2:Limitsofvoltageuctuationsandickerinlow 
voltage supply systems for equipment with rated current
<= 16A
■EN55024/A2:2003 Informationtechnologyequipment-Immunity  
characteristics limits and methods of measurement
Signature:   Place/Date:TAIPEI/2013
Printed Name : James Liang

Declaration of conformity
Trade Name: FOXCONN
Model Name: T70S Series
Responsible Party: PCE Industry Inc.
 Address: 458E.LambertRd.
  Fullerton,CA92835
 Telephone: 714-738-8868
 Facsimile: 714-738-8838
 EquipmentClassication: FCCClassBSubassembly
Type of Product: Motherboard
Manufacturer: HON HAI PRECISION INDUSTRY
COMPANY LTD
Address: 66 , CHUNG SHAN RD., TU-CHENG
INDUSTRIAL DISTRICT, TAIPEI HSIEN,
TAIWAN, R.O.C.
Supplementary Information:
ThisdevicecomplieswithPart15oftheFCCRules.Operationissubjecttothefollowingtwo
conditions:(1)thisdevicemaynotcauseharmfulinterference,and(2)thisdevicemustaccept
any interference received, including interference that may cause undesired operation.
Tested to comply with FCC standards.
Signature:  Date:2013

Installation Precautions
Website: http://www.foxconnchannel.com
Support Website: http://www.foxconnsupport.com
Worldwide online contact Support: http://www.foxconnsupport.com/inquiry.aspx
CPU Support List: http://www.foxconnsupport.com/cpusupportlist.aspx
Memory, VGA Compatibility List: http://www.foxconnsupport.com/complist.aspx
Technical Support
■ Electrostaticdischarge(ESD)isthesuddenandmomentaryelectriccurrent
 thatowsbetweentwoobjectsatdifferentelectricalpotentials.Normallyit
comes out as a spark which will quickly damage your electronic equipment.
Please wear an electrostatic discharge (ESD) wrist strap when handling
components such as a motherboard, CPU or memory.
■ EnsurethattheDCpowersupplyisturnedoffbeforeinstallingorremovingCPU,
memory, expansion cards or other peripherals. It is recommended to unplug the
AC power cord from the power supply outlet. Failure to unplug the power supply
cord may result in serious damage to your system.
CAUTIO
N
Please carefully read the following procedures to install your computer :
■ Itissuggestedtoselecthigh-quality,certiedfansinordertoavoiddamageto
the motherboard and CPU due to high temperature. Never turn on the computer
if the CPU fan is not properly installed.
■ WecannotguaranteethatyoursystemcanoperatenormallywhenyourCPU
is overclocked. Normal operation depends on the overclocking capacity of your
device.
■ Ifthereisany,whenconnectingUSB,audio,1394a,RS232COM,IrDAor
S/PDIF cables to the internal connectors on the motherboard, make sure their
pinouts are matching with the connectors on the motherboard. Incorrect
connections might damage the motherboard.
■ Whenhandlingthemotherboard,avoidtouchinganymetalleadsorconnectors.
■ Beforeturningonthepower,pleasemakesurethepowersupplyACinput
 voltagesettinghasbeenconguredtothelocalstandard.
■ Topreventdamagetothemotherboard,donotallowscrewstocomeincontact
with the motherboard circuit or its components. Also, make sure there are no
leftover screws or metal components placed on the motherboard or within the
computer casing.
■ Ifyouareuncertainaboutanyinstallationstepsorhaveaproblemrelatedtothe
 useoftheproduct,pleaseconsultacertiedcomputertechnician.

Chapter 1 Product Introduction
1-1ProductSpecications............................................................................2
1-2Layout ....................................................................................................4
1-3 Back Panel Connectors..........................................................................5
Chapter 2 Hardware Installation
2-1InstalltheMemory..................................................................................7
2-2InstallotherInternalConnectors ............................................................8
2-3Jumpers ...............................................................................................13
Chapter 3 BIOS Setup
Enter BIOS Setup.......................................................................................16
Main............................................................................................................17
F-center ......................................................................................................19
Smart BIOS.............................................................................................19
Fox Intelligent Stepping ..........................................................................20
CPUConguration ..................................................................................21
Advanced ...................................................................................................22
North Bridge............................................................................................22
ME Subsystem........................................................................................23
OnboardDeviceConguration................................................................24
SATAConguration .................................................................................25
Trusted Computing..................................................................................26
Network Stack.........................................................................................26
Boot ............................................................................................................27
CSM parameters....................................................................................28
Power .........................................................................................................29
Health .........................................................................................................31
Security ......................................................................................................32
Save & Exit.................................................................................................33
Chapter 4 CD Instruction
4-1Installdriverandutility..........................................................................35
1. Install Driver ........................................................................................35
2.InstallUtility.........................................................................................36
4-2FOXONE .............................................................................................37
1. Main Page...........................................................................................38
2.CPUPage-CPUControl....................................................................41
3. Frequency Page - Frequency Control (Optional) ................................44
4.LimitSetting ........................................................................................44
5.VoltagePage-VoltageControl(Optional) ..........................................47
6. Fan Page - Fan Control ......................................................................47
4-3FOXLiveUpdate...................................................................................48
TABLE OF CONTENTS

1. Local Update.......................................................................................48
2.OnlineUpdate .....................................................................................50
3.Congure ............................................................................................53
4.About&Help .......................................................................................55
4-4FOXLOGO ..........................................................................................56
4-5FOXDMI ..............................................................................................57
4-6Smartcharger ......................................................................................57

Thank you for buying Foxconn T70S Series mother-
board. Foxconn products are engineered to maximize
computing power, providing only what you need for
break-through performance.
This chapter includes the following information:
■ProductSpecications
■Layout
■BackPanelConnectors
Chapter 1 Product Introduction

PRODUCT INTRODUCTION
2
1-1 Product Specications
CPU Support Intel®Celeron 807 Single-core Processor(T70S-V/T70S-VF)
Intel®Celeron 1037U Dual-core Processor(T70S/T70S-F)
Max processor power up to 17W
For the latest CPU information, please visit:
http://www.foxconnsupport.com/cpusupportlist.aspx
Chipset Intel®NM70
Memory 1x204-pinSO-DDR3DIMM
Support up to 8GB of system memory
Support DDR3 1600MHz architecture
Expansion Slots 1 x Mini PCI Express slot (Full size)
1 x Mini PCI Express slot (Half size)
SupportPCIExpressGen25GT/sdatarate
Storage Intel®NM70 chipset
-1xSATA2.0connectors(3Gb/sdatatransferrate)
- 1 x SATA 3.0 connectors (6Gb/s data transfer rate)
LAN Realtek RTL8111F Gigabit LAN controller
Support 10/100/1000Mbps
Audio RealtekALC662
-HighDenitionAudio
-2.1-channel
-Support Jack-Sensing function
USB Supportupto8xUSB2.0ports(4rearpanelports,2onboardUSB
headerssupporting4extraports)
SupportUSB2.0protocolupto480Mb/s
Internal
Connectors
1x4-pin19VDCpowerconnector(Option)
1 x CPU FAN header (3-pin)
1xSystemFANheader(4-pin)
1 x Front panel header
1 x Front Audio header (T70S-F/T70S-VF)
1 x SATA 3.0 connector
1xSATA2.0connector
2xSATAPowerheaders
2xUSB2.0headers
1 x Speaker header
1 x LVDS header (Optional)
1 x Audio Voltage Selection header (Optional)
1 x Internal Microphone header (T70S/T70S-V)
1 x Internal Speaker header (T70S/T70S-V)
1 x LED Switch header (Optional)
1 x Panel Voltage Selection header (Optional)
1 x Backlight Inverter Voltage selection header (Optional)
1 x Mouse header
1 x Keyboard header

PRODUCT INTRODUCTION
3
1 x TPM/TCM header
1 x INTR header
1 x COM header
1 x ME header
1 x Clear CMOS header
Back Panel
Connectors
1 x DC-IN power port
1 x HDMI port
1 x VGA port
4xUSB2.0ports
1xRJ45LANport
1 x Microphone port
1 x Line Out port
Hardware Monitor System voltage detection
CPU/System temperature detection
CPU/System fan speed detection
CPU Overheating warning
CPU/System fan speed control
Green Function
SupportACPI(AdvancedCongurationandPowerInterface)
Support S3(suspendtoRAM),S4(suspendtodisk)
Support EuP function
Bundled Software FOX ONE, FOX LiveUpdate, FOX LOGO, FOX DMI, Smart Charger
Operating System Support for Microsoft®Windows®8/7
Form Factor Mini-ITX Form Factor, 6.7 inches x 6.7 inches (17cm x 17cm)

PRODUCT INTRODUCTION
4
1-2 Layout
Note : The above motherboard layout is for reference only, please refer to the physical
motherboard for detail.
1.4-pin19VDCPowerConnector
2.System_FanHeader
3. LVDS Header
4.Audio Voltage Selection Header
5.MINIPCIExpressSlots
6. Front Audio Header
7. Internal Microphone Header
8. Internal Speaker Header
9. INTR Header
10. Clear CMOS Header
11.SATA2.0Connector
12.SATA3.0Connector
13. FrontUSB2.0Headers
14.FrontPanelHeader
15.SpeakerHeader
16. LED Switch Header
17. Panel Voltage Selection Header
18. SATA power Headers
19. Backlight Inverter Voltage Selection Header
20.MouseHeader
21.TPMHeader
22.ME Header
23.KeyboardHeader
24.COM Header
25.SODIMM Socket
26.Chipset: Intel®NM70
CPU: Intel®Celeron 807 (T70S-V/T70S-VF)
Intel®Celeron 1037U (T70S/T70S-F)
18
1
34 2
5
14 15 19
10
11
12
13 24
25
23
22
26
7
8
9
6
16 17 20 21

PRODUCT INTRODUCTION
5
1-3 Back Panel Connectors
1. Power Port
Use the 19V DC power port to connect19V-3.42Apower adapter.
2. HDMI Port
TheHDMI(High-DenitionMultimediaInterface)providesanall-digitalaudio/videointerface
to transmit the uncompressed audio/video signals and is HDCP compliant. Connect the HDMI
audio/video device to this port. The HDMI Technology can support a maximum resolution of
1920x1080pbuttheactualresolutionssupporteddependonthemonitorbeingused.
3. VGA Port
To connect with external display devices, such as monitor or LCD display.
4. USB 2.0 Ports
TheUSBportsupportstheUSB2.0/1.1specication.UsethisportforUSBdevicessuchas
anUSBkeyboard/mouse,USBprinter,USBashdriveandetc.
5. RJ45 LAN Port
The Ethernet LAN port provides Internet connection at up to 10/100/1000Mb/s data rate.
6. Audio Ports
Forthedenitionofeachaudioport,pleaserefertothetablebelow:
VGA Port RJ45LANPort
HDMI Port
Power Port
Line Out Microphone In
1
6
4
2
5
USB2.0Ports Audio Ports
3
Port 2.1-channel
Green Line Out
Pink Microphone In
Active Link
LED LED
LAN Type Left: Active Right: Link
Status Description Status Description
1000M
Off No Link Off No Link
Green
Blinking
Data
Activity
Off 10Mb/s Connection
Green 100Mb/s Connection
Orange 1000Mb/s Connection

This chapter introduces the hardware installation
process, including memory, slots, pin headers and the
mounting of jumpers. Caution should be exercised dur-
ing the installation of these modules. Please refer to the
motherboard layout prior to any installation and read the
contents in this chapter carefully.
This chapter includes the following information :
■InstalltheMemory
■InstallotherInternalConnectors
■Jumpers
Chapter 2 Hardware Installation

HARDWARE INSTALLATION
7
2-1 Install the Memory
If you take a look at front side of memory module, it has asymmetric pin counts on both sides
separatedbyanotchinthemiddle,soitcanonlytinonedirection.Followthestepsbelowto
correctly install your memory modules into the sockets.
204-Pin
Step2:
The clips at both ends of the socket will
snap into place when the memory module
is securely inserted and pressed.
Notch
Step 1:
Plug the pin side of the memory module
into the socket slantwise, then press it
downrmly.
Read the following guidelines before you begin to install the memory :
■ Alwaysturnoffthecomputerandunplugthepowercordfromthepoweroutlet
before installing the memory to prevent hardware damage.
■ Memorymoduleshaveafoolproofdesign.Amemorymodulecanbeinstalledin
only one direction. If you are unable to insert the memory, switch the direction.

HARDWARE INSTALLATION
8
2-2 Install other Internal Connectors
Power Connectors
In order not to damage any device, make sure all the devices are installed properly before
applying the power supply.
This motherboard uses 19V DC power supply. You can choose one from the following two
power supply ways according to the actual conditions.
19V power port : DC_PWR
Firmly connect the power adapter cable into
the power port and make sure it is secure.
4-pin 19V DC Power Connector : PWR(Optional)
 Makesurethatthepowersupplycableandpinsareproperlyttedintotheconnectoronthe
 motherboard.Connectthe4-pin19Vpowersupplytothisconnector,thusprovidingpower
to the motherboard.
Pin # Denition
1 GND
2GND
3 +19V
4+19V
PWR
4
2
31

HARDWARE INSTALLATION
9
Front Panel Header : FP1
This motherboard includes one header for
connecting the front panel switch and LED
Indicators.
Hard Disk LED Connector (HDD-LED)
Connect to the chassis front panel IDE
indicator LED. It indicates the active status
of the hard disks. This 2-pin connector is
directional with +/- sign.
Reset Switch (RESET-SW)
Attach the connector to the Reset switch on
the front panel of the case; the system will
restart when the switch is pressed.
Power LED Connector (PWR-LED)
Connect to the power LED indicator on the
front panel of the chassis. The Power LED
indicates the system’s status. When the
system is in operation (S0 status), the LED
is on. When the system gets into sleep mode
(S1) , the LED is blinking; When the system
is in S3/S4 sleep state or power off mode
(S5),theLEDisoff.This2-pinconnectoris
directional with +/- sign.
Power Switch Connector (PWR-SW)
Connect to the power button on the front
panel of the chassis. Push this switch allows
the system to be turned on and off rather than
using the power supply button.
Serial ATA Connectors : SATA_1/2
The Serial ATA connector is used to connect with
SATA Hard Disk or CD devices which support this
feature.TheSATA_2allowsupto3GB/s
data transfer rate, the SATA_1 support SATA
3.0 specication, and allows up to 6GB/s data
transfer rate.
TPM Header : TPM
The TPM (Trusted Platform Module) provides the
ability to the PC to run applications more secure
and to make transactions and communication
more trustworthy. To utilize this function, you
should purchase additional device and install it.
HDD-LED
RESET-SW
NC
+
-
PWR-SW
+
-PWR-LED
EMPTY
12
10
9
FP1
LCLK
LFRAMEn
LRESETn
LAD3
VDD
LAD0
3D3V_DUAL
NC_1
GND
LPCPDn
GND
EMPTY
LAD2
5V_SYS
LAD1
GND
NC_4
SERIRQ
CLKRUNin
NC_5
12
19 20
TPM
GND
TX+
TX-
GND
RX-
RX+
GND
1
SATA_2
GND
TX+
TX-
GND
RX-
RX+
GND
1
SATA_1

HARDWARE INSTALLATION
10
Audio Header : F_AUDIO
The audio header supports HD Audio standard.
It provides the Front Audio output choice.
Fan Header : SYS_FAN
The fan speed can be controlled and monitored
in “Health” section of the BIOS Setup. The fan
can be automatically turned off after the system
entersS3,S4andS5sleepingstates.
USB Headers : F_USB1/2
In addition to the USB ports on the rear panel,
this product also provides 10-pin USB headers
on its motherboard. By connecting through USB
cables with them, user can quickly expand another
USB ports on the front panel.
Speaker Header : SPEAKER
The speaker header is used to connect speaker
of the chassis.
Chassis Intrusion Alarm Header : INTR
The header can be connected to a security switch
on the chassis. The system can detect the chassis
intrusion through the function of this connector. If
eventually the chassis is closed, the system will
end a message out.
COM Header : COM
This motherboard supports one serial RS232
COM1 port for legacy compatibility. User must
purchaseanotherRS232cablewitha9-pinD-sub
connector at one end to connect with the external
RS232deviceandanotherendwith10-pinfemale
connector to connect with COM header in the
motherboard.
A_MIC2_L
A_MIC2_R
A_LINE2_L
SENSE_SEND
SENSE1_RETURN
PRESENCEJ
EMPTY
SENSE2_RETURN
AUD_GND
12
109
F_AUDIO
A_LINE2_R
SYS_FAN
SENSE
POWER
GND
CONTROL
1
VCC
D-
EMPTY
D+
GND
D+
D-
GND
NC
VCC
12
109
F_USB1/2
NC
PWR
EMPTY
SPEAKER
SPKJ
1
INTR
GND
INTRUDERJ
1
DCD
SOUT
RI
GND
RTS
DSR
DTR
CTS
EMPTY
SIN
12
109
COM

HARDWARE INSTALLATION
11
Mini PCIE Slot : MINIPCIE1/2
The MINI PCIE Slot is used to connect Mini
PCIE device.
Audio Voltage Selection Header :
AUDIO_ADJ
This header is used to connect the volume con-
troller which is used to adjust the volume.
Internal Microphone Header : IN_MIC
This header is used to connect microphone
device.
Internal Speaker Header : SPK_CONN
This header is used to connect speaker device
to play audio.
LED Switch Header : PANEL_EN
This header is used to connect the display
panel controller device to control the display
panel on/off.
SATA Power Header : SATA_PWR1/2
Connect the power header of SATA power-
signal cable into this header to power SATA
device.
Keyboard Header : H_KB
Usingthisheader,youcangetastandardPS/2
keyboard port expanded.
MINIPCIE1/2
VOLUME_UP
VOLUME_DOWN
NC
GND
GND
GND
AUDIO_ADJ
1
5
2
6
1
IN_MIC
A_MIC2_RL
GND_AUDIO
1
SPK_CONN
SPKOUT_R_P
SPKOUT_L_P
SPKOUT_R_N
SPKOUT_L_N
1
SATA_PWR1/2
5V_SYS
GND
12V_SYS
3D3V_SYS
H_KB
HEAD_KDAT
GND
HEAD_KCLK
5V_DUAL
1
PANEL_EN
GND
PANEL_ON_OFF
1

HARDWARE INSTALLATION
12
H_MS
HEAD_MDAT
GND
HEAD_MCLK
5V_DUAL
1
1
LKLT_CTRL
BRIGHT_ADJ
GND
BRIGHT_PWR
BRIGHT_DOWN
BKLT_ON
GND
BRIGHT_PWR
BRIGHT_UP
Mouse Header : H_MS
Usingthisheader,youcangetastandardPS/2
mouse port expanded.
LVDS Header : LVDS1
This header is used to connect the display
panel.
Backlight Inverter Voltage selection
Header : LKLT_CTRL
This header is used to connect the backlight
controller to adjust the screen brightness.
2930
12
LVDS1
GND
LVDSB_DATA0
LVDSB_DATA0#
LVDSB_DATA2
LVDSB_DATA2#
LVDSB_DATA3
LVDSB_DATA3#
GND
LVDSA_DATA0
LVDSA_DATA0#
LVDSA_DATA2
LVDSA_DATA2#
GND
LCDVDD
LCDVDD
GND
LVDSB_DATA1
LVDSB_DATA1#
LVDSB_CLK
LVDSB_CLK#
GND
LVDSA_DATA3
LVDSA_DATA3#
LVDSA_DATA1
LVDSA_DATA1#
LVDSA_CLK
LVDSA_CLK#
GND
LCDVDD
LCDVDD

HARDWARE INSTALLATION
13
2-3 Jumpers
For some features needed, users can change the jumper settings on this motherboard to modify
them. This section explains how to use the various functions of this motherboard by changing the
jumper settings. Users should read the following content carefully prior to modifying any jumper
setting.
Description of Jumpers
1.Foranyjumperonthismotherboard,Pin1canbeidentiedbytheboldsilkscreennexttoit.
However, in this manual, Pin 1 is simply labeled as “1”.
2.Thefollowingtableexplainsdifferenttypesofthejumpersettings."Closed"meansplacinga
jumper cap on the two pins to temporarily short them. The shorting can also be done by touching
two pins by a screwdriver for a few seconds, but using jumper cap is recommended. It can
prevent hazardous ESD (Electrical Static Discharge) problem.
Clear CMOS Jumper: CLR_CMOS
The motherboard uses CMOS RAM to store the basic hardware information (such as BIOS data,
date, time information, hardware password...etc.). Clear CMOS data is the fast way to go back to
factorydefaultwhentheBIOSsettingsweremistakenlymodied.
The steps to clear CMOS data are :
1. Turn off the computer, unplug the power cord from the power outlet.
2.Removejumpercapfrompins1-2,putitontopins2-3toshortthem.ThiswillclearCMOSdata.
3.Returnthesettingtoitsoriginalwithpins1-2closed.
4.Pluginthepowercordtoyourcomputerandturniton.
5.GotoBIOSSetuptocongurenewsystemasdescribedinnextchapter.
Clear
1
2
3
Normal
(Default)
1
2
3
CLR_CMOS
Jumper Diagram Denition Description
Closed SetPin1andPin2closed
Open SetPin1andPin2Open
1-2 SetPin1andPin2closed
2-3 SetPin2andPin3closed
1
1
1
1
1
1
■ Disconnectthepowercablebeforeadjustingthejumpersettings.
■ DonotcleartheCMOSwhilethesystemisturnedon.
CAUTIO
N