Foxxray SuperNova FXR-SM-01 User manual

User's Guide

Buttons & function
Mouse button / Click
Mouse button / Menu
Mouse button
Scroll wheel and Universal scrolling
Mouse button / Backward
Mouse button / Forward
Mouse button / DPI+
Mouse button / DPI-
Setting switch
Avago optical sensor
Low-friction Teflon mouse feet
Anti-tangle braided cable

System & hardware requirements
PC with USB port
Windows XP / Vista / 7 /8
CD/DVD/BD-ROM drive for software installation
20MB of free hard disk
Package contents
FOXXRAY SuperNova Optical Gaming Mouse
Software CD
User's Guide
Installation
1. Plug mouse into the USB port of your computer.
2. Insert software CD into drive.
3. Run the installer.
4. Follow the instructions on screen to set.
5. At the end of the Installation, click FINISH.
6. Use the mouse with software to enjoy games.
Visit our product website
Please visit www.foxxray.com.tw for get more product information,
and free online technical support.
Warranty
1 year limited manufacturer`s warranty.
More warranty service information at www.foxxray.com.tw
or contact us by service mail : [email protected]

Buttons function setting
Assigns various function to buttons. Press the
number of button, then to select the function
do you need at right side menu.
Profile and other
At this area can save mouse setting at each
profile to select, or save/load mouse setting.
When you complete every setting, apply into
mouse, also can reset all to factory setting.
Macro
Select Macro Manager to open management
interface. You can set the macro to button, to
create new macro or delete the macro. If you
want create new macro, must name the macro.
Confirm name of the macro and then press
Record Button to start record actions into
macro. When action finish or max record limit
reached, press Stop Button to complete record.
Select the options at right side. can record delay
and actions at the same time, or input delay at
every time, and set macro loop. You can double
click each delay time to edit.
Configuring your SuperNova gaming mouse
The features listed here require the SuperNova software driver to be installed.

Multi-Click
When button set to Multi-Click, you can set frequency
and delay time.
Advanced
At this area can set mouse report rate, switch to
125/250/500/1000Hz. And backlight options, include On/Off
switch, adjust breathe frequency, choose 6 colors.
System setting
This section is the same as control panel of OS, to adjust
double click speed, pointer speed, enhance pointer
precision, and scroll speed.
Sensitivity
Set DPI level and value of the mouse. Default DPI value are
400/800/1600/3500. You can press up or down arrow to
adjust by 100 DPI units, or slider the track bar to adjust.
Another function is check to switch diffirent X/Y setting, and
pointer acceleration.