Foxydry ACTIVE IRONING BOARD User manual
ACTIVE IRONING BOARD
INSTRUCTION MANUAL
Before using this appliance, please read this instruction manual and keep it for future reference.
SAVE THESE INSTRUCTIONS
2Safety Information
IMPORTANT SAFE TY INFORMATION
.
Dear Customer,
We are delighted that you have purchased the Euroex Smooth
Active Ironing Board. Through proper assembly, use and
maintenance the board will provide excellent ironing results for a
long time. Before using this ironing system for the rst time, please
read carefully through the instructions in this manual and store
them for future reference. These instructions are to accompany the
appliance when it is used by another person who is unfamiliar with
its operation or when ownership is transferred to another person.
The manufacturer, importer and the distributor assume no liability
in the event that the information in these instructions has not been
strictly followed.
SAFETY WARNINGS
•If the electrical cord is damaged, it must be
replaced by manufacturer, its service agent
or similarly qualied person in order to avoid
hazard.
•This appliance can be used by children
aged from 8 years and above and
persons with reduced physical, sensory or
mental capabilities or lack of experience
and knowledge if they have been given
supervision or instruction concerning use of
the appliance in a safe way and understand
the hazards involved.
•Children must not play with the appliance.
•Cleaning and user maintenance shall not be
carried out by children without supervision.
SAVE THESE INSTRUCTIONS
3
Safety Information
IMPORTANT SAFE TY INFORMATION
.
IMPORTANT NOTICES
• WARNING! If neither of the suction or blowing function is active, use
the iron in dry-ironing mode (without steam) to avoid condensation
inside the board.
• This appliance complies with European Directives regarding
“electromagnetic compatibility” and “Electrical product safety”. The
appliance carries CE marking.
• Repairs should be carried out solely by personnel authorized by the
manufacturer. Equipment repaired by personnel who are not authorized
to do so, represent a risk and, as such, are not covered by the warranty.
• The manufacturer reserves the right to make changes to the design and
features of the appliance without notice.
• This appliance is solely for household domestic use.
• This appliance is not to be used if it has been dropped, if there are visible
signs of damage or if it is leaking.
• Do not connect the appliance before having made sure that electrical
voltage supply corresponds to the required voltage shown on the
product.
• The electric socket should be earthed and equipped with a 16A
automatic circuit breaker.
• The auxiliary power outlet should be used only with ironing systems
with consumption max indicated on the socket.
• Do not connect the appliance to the electricity power supply with
an unsuitable multi-socket or an unsuitable extension lead. These do
not guarantee the required safety of the appliance (e.g. danger of over
heating).
• The manufacturer, importer or distributor assume no responsibility for
damage to property or injury to persons, in the event that this appliance
is damaged as result of improper use or assembly; unauthorized repairs
carried out or unauthorized spare parts have been used; and for not
properly following the care and maintenance instructions found in this
manual.
• Do not expose the appliance to water, dampness or heat. Only use
indoors, not intended for outdoor use.
• Use a dry or slightly damp cloth to clean this appliance.
• Use solely manufacturer-recommended accessories or spare parts.
SAVE THESE INSTRUCTIONS
4Safety Information
• Do not iron without the ironing board cover. The ironing board
reaches potentially high temperatures, do not touch under any
circumstances. High temperatures may potentially scald.
• Keep the appliance in a safe dry place (not outdoors) and out of the
reach of children when not in use.
• Do not pull on the electrical cable. Do not use the cable to move
the appliance. Do not exert undue pressure on the cable (i.e. when
closing a door). Avoid any contact with sharp edges and corners.
Keep the cable away from hot surfaces.
• No parts which are to an electrical power supply (switch, plug,electronic
components, etc) should come in contact with water.
• Disconnect the appliance from the power supply prior to any
maintenance or cleaning operations. Always allow the appliance to
completely cool down.
• Remove the power supply in the event the appliance remains
unattended for a long.
• Do not overturn or lean the appliance unduly to one side.
• Do not insert any object in the various openings and do not use the
appliance if any opening is obstructed.
• Do not use the appliance with wet hands or bare feet.
• Do not use the appliance when close to ammable or explosive
substances.
IMPORTANT SAFE TY INFORMATION
.
SAVE THESE INSTRUCTIONS
5
Safety Information
INDICATIONS OF USE
This manual can not take into account every possible use.
For further information or for any problems that are not
covered in detail in this manual, please contact the Service
Center or retailer. Keep this manual in a safe place for
future reference .
Destroy all plastic bags and packaging material, they
can be a risk for children!
NOTE: Keep the packaging for possible future transport (eg
relocations, repairs, etc.)
Attention: the photographs and/or drawings in this document are
for illustrative purposes only. Actual appliance and the accessories
may vary due to product enhancement.
Safety Informations in Digital Format: www.emmepi.tv/warning
ADVICE ON DISPOSAL
1. When this crossed-out bin symbol appears on a
product it means that the product is covered by
European Directive 2002/96/EC
2. All electrical and electronic products should be
disposed of separately from the municipal waste
stream via specic collection facilities designated by
the government or the local authorities.
3. Proper disposal of your old appliance will help prevent potential
negative consequences for the environment and human health.
4. For more detailed information about disposal of your old appliance,
please contact your municipality, the waste disposal service or the
shop where you purchased the product.
IMPORTANT SAFE TY INFORMATION
.
Disposal of your old appliance
Product Overview
6Product Overview
PRODUCT OVERVIEW
1. Auxiliary power supply socket
Max 2300W
2. Iron storage shelf
3. Power ON-OFF button
4. Power indicator light
5. Control Panel
6. Function switch: suction position
7. Function switch: blowing position
8. Iron rest pad
9. Board height adjustment lever
10. Power supply cable
11. Iron Cord Support
1
2
35
4
6
9
10
7
11
8
Before Use
7
Before Use
BEFORE USE
Before starting the appliance for the rst time,
always remember that an improper use, assembly or
maintenance can be hazardous. Please, carefully read
the instructions on page 2,3,4,5.
ELECTRICAL CONNECTION (UK ONLY)
For your safety please read the following information.
Warning!This appliance must be earthed.
The appliance must be connected to a 220-240 volts 50 cycle AC
supply by means of a three pin socket, suitably earthed and should
be protected by a 13 amp fuse in the plug.
The appliance is supplied with a rewireable 13 amp 3 pin plug tted
with a 13 amp fuse. Should the fuse require replacement, it must be
replaced with a fuse rated at 13 amp and approved to BS1362.
If the mains plug is unsuitable for the socket outlet in your home
or is removed for any other reason, then the cut off plug should be
disposed of safely to prevent the hazard of electric shock.
There is a danger of electric shock if the cut off plug is inserted into
any 13 amp socket outlet.
How to wire a 13 amp plug.
Important
The wires in the mains lead on this appliance are coloured in
accordance with the following code:
Green and Yellow – Earth
Blue – Neutral
Brown – Live
The green and yellow wire must be
connected to the terminal in the plug
which is marked with the letter E or with
the earth symbol .
The blue wire must be connected to the terminal marked N.
The brown wire must be connected to the terminal marked L.
Before Use
8Before Use
PREPAREYOUR IRONING BOARD
POSITIONING
When setting up the ironing board please note the following:
• Place the ironing board on a at, even, dry surface, near an
earthed power socket
• Position the ironing board securely so that nobody can knock it
over or get hurt.
• Never put the appliance on or near warm surfaces or near ames
• Use the appliance indoors only.
• To avoid scalding, keep the appliance away from children.
• Use only the correct extension cables in accordance with the
advice given on page 2,3,4,5; pay attention not to trip over the
cord.
Put up the ironing board as follows:
• Place the ironing board upright on the oor (folded shelf end
downward).
• Hold the end of the ironing board with one hand.
• With the other hand hold the upper part of the ironing board legs.
• Firmly pull the ironing board
wide apart (1.) until the
adjustment height device locks
in place (2.).
• Place the ironing board in a
horizontal position (3.).
• Unfold the shelf as shown here.
Note: Be careful that
the feet of the ironing
board don’t slip on
smooth oors while
opening/closing the
ironing board.
Insert the iron cord support in one of the small holes on
each side of the ironing board and hang the iron steam
cord. The iron cord support keeps the iron cord away
from the surface of the board while ironing to avoid
the cord moving or dragging the garment.The iron cord
support also prevents “wear and tear” of the iron cord
due to rubbing against the edges or surface of the board.
1
1
1
2
3
INSTRUCTION FOR USE IB40/C ECO PLUS
9
IRONING BOARD START UP
• Plug the power supply cord from your iron/steam generator into the
auxillary socket built-in to the ironing board.
• Plug the power supply cord from your ironing board into a 13amp
wall socket and switch the socket on.
• Switch the appliance on using the power on/off switch (3).The power
on/off switch activates the ironing board and the generator or steam
iron plugged into the auxillary socket.
2
Starting the Appliance
Starting the Appliance
SUCTION/BLOWING FUNCTION
AND HEATING OFTHE BOARD
The suction absorbs the excess steam, which
is no longer used after the ironing process.The
suction helps hold the garment on the ironing
surface and helps to dry the garment. Garment
ironed with this board are ready to be placed
straight in the wardrobe without further airing.
The heated ironing surface stays dry, and keeps the steam hot so
that it passes through the board to be expelled without condensing.
WARNING! If the ‘SELECTOR SWITCH‘ is in the “0”position
(none of the two functions between suction and blowing is active),
use your iron in dry-ironing mode (without steam), to avoid the
condensation inside the board.
SUCTION FUNCTION
With the suction function, light fabrics (silk etc.) can be held in
place on the ironing board, preventing them from slipping.
The suction function cools and sets the fabric during ironing,
guaranteeing no wrinkles.
•For the suction function set the selector switch on position “I” (4).
•With the switch in position “0”, the suction function is switched off.
SELECTOR SWITCH
3
Starting the Appliance
10 Starting the Appliance - Shutdown Operations
BLOWING FUNCTION
The blowing function allows you to iron on a pillow of air without
applying downward pressure. This makes ironing of delicate items,
or difcult areas (trousers folds, pockets, seams, difcult areas to
reach), much easier and avoids the visible signs or seam crushing.
•For the blowing function set the selector switch on position“II” (5).
• With the switch in position “0”, the blowing function is switched off.
AFTER IRONING
• After use, leave the board open for 10 minutes to dry the cover
and to avoid the formation of condensation in the board.
• Turn off the ironing board using the power on/off switch. (1)
• Remove the plug from the socket (9).
• Let the equipment cool completely.
• Remove the iron cord support.
• Place the iron on the iron rest pad.
• Unplug the iron/steam generator from the auxillary socket and
remove it from the board.
• Fold the shelf back over the ironing surface.
• Wrap the power supply cord around two
cord supports beneath the board.
• Hold the board leg with your foot to stop it skidding.
• Operate the height adjustment lever and close the board.
Note: do not entangle the power cord. Store the closed board in a
vertical position with the folded shelf end towards the oor. Always
ensure that the board does not skid and tilt. Store the appliance in
a dry place and out of reach of the children.
4
Shutdown Operations
11
Maintenance
MAINTENANCE
Changing the Cover
With continuous use, the cover which is tted with a drawstring is
subject to wear and should be replaced regularly. Due to the design
of this ironing system which incorporates a heated ironing surface
and to guarantee the correct performance of the product,we
recommend that you use only Euroex ironing board covers.
Metalized heat reective covers and covers with thick lining are
not suitable for this ironing system and may cause overheating of
the suction motor.
Warning! In case of failure due to faulty material or if damage
results due to the appliance falling over or being dropped,
immediately remove the plug from the socket. Repairs should be
performed exclusively by an authorized Service Centre. Repairs
performed by unauthorized personnel may cause serious hazards
for users. No responsibility or liability is assumed for injury to
persons or damage to property caused by repairs performed by
unauthorized personnel or where parts have been used that are
not approved by the manufacturer.In such cases the manufacturer’s
warranty is voided.
Maintenance
5
B1X - 12/2022
Cometa Srl
Via G. Schiratti, 49
31053 Pieve di Soligo,TV
P.iva: 03845300262
+39 0438 971412
info@foxydry.com
Table of contents
