8
it isrequired tomodifythe parameters manuallywhen youarethe 1st timetouse this
phone.
2.2.1. Setting for MODEM mode
1. Press theMENU key,and press the DOWN keytwice, the LCDscreenwill display
“3Network”.Then press the Enterkey three times, theLCD screen will display
the currentmode like“DHCP”.
2. Press theRIGHTof navigator keys to find until screen shows “<>PPPoE”.Press
the same keythatshowing “Save”to accept，LCD responds “Saved”and now the
Netmode ischanged for the Modem. Press QUITkey fourtimes to exit for
ON-HOOKmode.
3. Followa severalstepsto finish the setting. To dothis, press the MENUkey, and
press the DOWN keytwice, then ENTERkeytwice, NEXT key twice, nowyou see
“1. PPPoESET”appear.Then press ENTERand LCD shows “Account”.Press
EDITonce, you can inputyourAccount Name which youuse it to subscribe for
accessing internet throughthe keyboard according to the method described in the
in the 3.1.2 paragraphbelow “Digit-character maptable”. Afterdone for
input, press SAVE and then press QUITonce. Nowyou will see “2. Password”and
press NEXTthenENTER, EDIT, here you have to inputyourPasswordas you use
it to subscribe foraccessing internetthrough the keyboard. Press SAVEand then
press QUIT5 timesto complete the setting.
4. Afterback toONhook mode, LCD will show “Negotiating ”, meansthatphone
is still trying to build a connection with server and doesnotfind it yet. The phone
will notwork atthisstatus. If it doesfinish the subscription, the currenttime will
display, means your ISPserver (Your Internet provider) hasbeen detected
successfully and isreadyto work. Nowyou can make a call.
5. LetyourPCto share theinternetin the same network. Connectthe cable fromPC
to the LAN port on rearofIPcall-200. Nowthe phone workslike a normalrouter in
thisnetwork. So thatyou need to change the NetworkSetting fromthe control
panelon PC.Open the option ofNetwork Setting, then selectthe tab of
“Connection”, remove the previoussetting item from “DialUp and Private VPN
network dialog “box and disable thisoption. Activate theloweroption “Local
LAN”setting and selectthe “Auto-detectIP”fromthe LocalLAN setting page.
Then, yourPCwill getthe dynamicIPfromthe phone-“Router”to access to
internetsuccessfully.
3. BasicFunctions
3.1. Basicoperation
