Freedom Nixon 24244831 User manual

Nixon Sofabed
24244831
Thank you for purchasing the Nixon Sofabed. Before you begin to assemble your new piece of furniture, please
check to ensure that all hardware and parts have been supplied. This page lists all contents included in the
carton(s).
Follow instructions closely as deviation from them may present a possible safety risk and may void your warranty.
It is recommended that assembly is done on a soft surface such as carpet to avoid any damage. If you experience
any problems with your new purchase, please phone Freedom Customer Service(FSC) on 1300 135 588 (Australia)
or 0800 469 327 (New Zealand).
Care Information
Fabric
Periodically check and re-tighten any fasteners. Avoid direct sunlight. Treat spills and stains as soon as they occur.
Gently scrape any soil or mop and liquid from the surface of the fabric, apply proprietary cleaning agents strictly
according to instructions to remove the residue of the spill. Do not saturate the fabric or interior with water or other
cleaning liquids. May be spot cleaned with dry cleaning solvent. Pilling can occur occasionally as a result of normal daily
wear and should not be considered as a fault. Fibre spills can be removed by a battery operated pilling tool available
from most haberdashery stores.
For further care information please refer to the care label attached to the base of your sofa.
Hardware (Supplied)
Step 1
www.freedom.com.au
www.freedomfurniture.co.nz Page 1 of 3
A ×4
Sofa Leg * H3.35cm

Step 2
Step 3
www.freedom.com.au
www.freedomfurniture.co.nz Page 2 of 3

Nixon Sofabed
24244831
！Two people required to orientate sofa
Finished
www.freedom.com.au
www.freedomfurniture.co.nz Page 3 of 3