FreeLight DMB-8800A User manual

Freelight DMB-8800A
HDMI / SDI мини энкодер

Caution Statements:
Please observe the following safety requirements before operating the
equipment.

1
Index
Index ................................................................................................................................................ 1
Chapter 1 Introduction .................................................................................................................................... 2
1.1 Outline ................................................................................................................................................ 2
1.2 eatures ............................................................................................................................................. 2
1.3 Specifications .................................................................................................................................... 3
1.4 Inner unction Principle ................................................................................................................... 5
1.5 Appearance and Description .......................................................................................................... 5
1.6 Applications ....................................................................................................................................... 6
Chapter 2 Installation Guide .......................................................................................................................... 6
2.1 Acquisition Check ............................................................................................................................. 7
2.2 Installation Preparation .................................................................................................................... 7
2.3 Wire’s Connection ............................................................................................................................ 9
2.4 Signal Line Connection .................................................................................................................... 9
Chapter 3 WEB Operation ............................................................................................................................. 9
3.1 Login ................................................................................................................................................. 10
3.2 Status Display ................................................................................................................................. 11
3.3 Network Setting ............................................................................................................................... 13
3.4 Encoding Setting ............................................................................................................................. 14
3.5 Extended Setting ............................................................................................................................ 18
3.5.1 Advanced .............................................................................................................................. 18
3.5.2 CSC Setting ......................................................................................................................... 18
3.6 Audio Setting ................................................................................................................................... 19
3.7 OSD Setting ..................................................................................................................................... 19
3.7.1 LOGO UPLOAD .................................................................................................................. 21
3.8 System Setting ................................................................................................................................ 21
3.8.1 Network Setting ................................................................................................................... 21
3.8.2 Password Setting ................................................................................................................ 22
3.8.3 Upgrade Setting ................................................................................................................... 22
3.8.4 Reset ..................................................................................................................................... 23
3.8.5 Reboot ................................................................................................................................... 23
3.9 VLC Decoding Configuration ........................................................................................................ 24
Chapter 4 Troubleshooting .......................................................................................................................... 25

2
Chapter 1 Introduction
1.1 Outline
In a fast changing and highly competitive TV market, operators and TV service providers must
deliver access to content on all screens, anytime, anywhere, while also reducing complexity and
driving efficiency across all platforms.
DMB-8800A-EC Classic H.265/HEVC IPTV Streaming Encoder features high performance, low
latency and low bit rates for IPTV/OTT systems, realized Video & Audio real-time transmission via
internet, and adopts state-of-the-art compression technology of H.265/HEVC, which realizes its
resolution to be up to 1080P/60fps. With powerful video pre-compression and efficient adaptive
video compression algorithm, it is able to provide clear-delicate, high quality video even at lower bit
rate which can efficiently save the cost of bandwidth. DMB-8800A-EC Classic accepts 1*HDMI
input, then output 4 groups TS over IP in H.265 format with multi-protocol, multi-resolution which
can be freely adjusted according to your needs.
DMB-8800A-EC Classic provides fully functional second development package, which can be
applied to education, health care, IPTV, conference, remote education, news interview, court,
public security, banking, transportation and other industry application.
1.2 Features
 Video Input: one channel HDMI/SDI for option
 Video compression up to ull HD 1080P@60fps
 Support up to 4 groups TS over IP stream out
 Support H.265/H.264 Main Profile/High Profile and MP3 & AAC audio compression
 Bitrate mode: CBR/VBR 16Kbit/s~12Mbit/s
 Support streaming resolution settings
 GOP frame rate settings supported
 Capable of image parameter settings
 Insertable of logo and Scroll Caption; Adjustable of audio gain;
 Video Output: Multiple output streams per input service to support Broadcast, VOD, IPTV
and OTT, Mobile/ web, Set top box applications
 Support up to 2 groups TS over IP stream out.
 Switchable of audio output mode: Left, right and Stereo
 Configurable of Multi-rate, Multi-resolution, Multi-protocol

3
 Providing HLS, RTSP/HTTP/UDP or RTMP protocol
 Support ONVI Network Video Protocol
 Support multiple equipment display at the same time on a computer
 Any IOS browsers(iphone, ipad, acBook etc) are able to have streams from IPTV
Streaming Encoder in Anytime, Anywhere by HLS protocol without install any
software players.
 Any terminal devices/decoders are able to have streams from IPTV Streaming Encod
er directly by RT P protocol with software players(such as VLC).
 System supports WINDOWS XP/VISTA/SERVER2003/SERVER2008/WIN7 32 and WIN7
64, LINUX
 Support Microsoft standard flow driven architecture (WDM architecture), support Microsoft
WMENCODER, compatible with Windows V W software architecture and WDM mode.
 Web-based management
 ull-duplex mode 1000M
1.3 Specifications
VIDEO SPECIFICATIONS
 Video compression: H.265 HEVC, H.264/AVC High Profile Level 4.0
 Video inputs: HDMI(support HDCP protocol) or SDI input
 Analog video input mode: PAL, NTSC
 Resolution:
HD I main stream:
1920x1080,1680x1056,1280x720,1024x576,850x480,720x576,720x540,720x480,
720x404,704x576,640x480,640x360,auto
HD I second stream:
1920x1080,1680x1056,1280x720,800X450,720x576,720x540,720x480,720x404,704x576,6
40x480,640x300,352X288,320X240,320X180 auto
HD I third stream:
720x576,720x540,720x480,720x404,704x576,640x480,
640x300,352X288,320X240,320X180

4
HD I fourth stream:
720x576,720x540,720x480,720x404,704x576,640x480,
640x300,352X288,320X240,320X180
 Bit-rate: 16kbps~12Mbps, CBR/VBR
 Video pre-processing: Noise reduction, Sharpen, iltering
AUDIO SPECIFICATIONS
 Audio compression: AAC, MP3
 Sampling rate: Adaptive, selectable of re-sample.
 Sampling accuracy: 24-bit
 Bit Rate: 48000,64000,96000,128000,160000,192000,256000
 Re-sample:32000,44100
OUTPUTS
IP output
 Transport protocol: TS over IP output, HLS, RTSP, HTTP, UDP and RTMP protocol
 or each HDMI to IP output, supporting output 4 groups TS over IP streams (for each group
the HLS, HTTP, RTSP, UDP and RTMP protocol all enabled) with 4 different resolutions
(up to 1080p@60fps) and 4 different bitrates to meet different size screen and different
bandwidth condition.
 Connector: RJ45, 1000M
GENERAL OPTIONS
System
 Configuration Interface: Web-based
 Upgraded: via network
 Connector: RJ45, 100M Ethernet interface.
PHYSICAL AND POWER
 Voltage: 12V DC
 Consumption: less than 5W
 Operating temperature: 0~50°C
 Dimensions: 112mm(W)*100mm(D)*28mm(H)
 Weight: 0.3Kg/pc

5
1.4 Inner Function Principle
1.5 Appearance and Description
1
Ethernet Port(Network management port+ Data port)
2
3.5 Line In Audio Input

6
3
Power supply DC12 V interface
4
HDMI Input
5
RESET
SDI input Version
1
Ethernet Port(Network management port+ Data port)
2
Power supply DC12 V interface
3
SDI Input
4
RESET
1.6 Applications
 IPTV system
 OTT system
 Internet TV
 Digital Signage Project
 Remote Video Conference
 Video Monitoring
Chapter 2 Installation Guide

7
2.1 Acquisition Check
When user open the package of the device, it is necessary to check items according to packing list.
Normally it should include the following items:
 DMB-8800A-EC Classic Provideo Streamig Encoder 1PC
 Power Cord 1PC
 3.5mm Cable 1PC
If any item is missing or mismatching with the list above, please contact the local manufacturer.
2.2 Installation Preparation
When user installs the device, please follow the steps below:
 Checking the possible device missing or damage during the transportation
 Preparing the relevant and correct environment for installation
 Installing DMB-8800A-EC Classic Provideo Streaming Encoder
 Connecting communication port( if it is necessary)
2.2.1 Device’s Installation Flow Chart Illustrated as following:
2.2.2 Environment Requirement
Item Requirement
Machine Hall Space
When user installs machine frame array in one machine hall, the
distance between 2 rows of machine frames should be 1.2~1.5m and
the distance against wall should be no less than 0.8m.
Machine Hall loor Electric Isolation, Dust ree

8
Volume resistivity of ground anti-static material: 1X10
7
~1X10
10
Ω ，
Grounding current limiting resistance: 1MΩ ( loor bearing should be
greater than 450Kg/ ㎡ )
Environment
Temperature
5~40 ℃ (sustainable ) ， 0~45 ℃ (short time) ，
installing air-conditioning is recommended
Relative Humidity 20%~80% sustainable 10%~90% short time
Pressure 86~105Kpa
Door & Window Installing rubber strip for sealing door-gaps and dual level glasses for
window
Wall It can be covered with wallpaper, or brightness less paint.
ire Protection ire alarm system and extinguisher
Power
Requiring device power, air-conditioning power and lighting power
are independent to each other. Device power requires DC 12V.
Please carefully check before running.
2.2.3 Grounding Requirement
 All function modules’ good grounding designs are the basis of reliability and stability of devices.
Also, they are the most important guarantee of lightning arresting and interference rejection.
Therefore, the system must follow this rule.
 Grounding conductor must adopt copper conductor in order to reduce high frequency
impedance, and the grounding wire must be as thick and short as possible.
 Users should make sure the 2 ends of grounding wire well electric conducted and be antirust.
 It is prohibited to use any other device as part of grounding electric circuit
 The area of the conduction between grounding wire and device’s frame should be no less than
25mm
2
.
2.2.4 Frame Grounding
All the machine frames should be connected with protective copper strip. The grounding wire
should be as short as possible and avoid circling. The area of the conduction between grounding
wire and grounding strip should be no less than 25mm
2
.
2.2.5 Device Grounding
Connecting the device’s grounding rod to frame’s grounding pole with copper wire.

9
2.3 Wire’s Connection
The power switch is located at the left of the front panel, and the power socket and grounding pole
is located at the right end of the rear panel, whose order goes like this, power socket and grounding
pole, and users can refer 1.4 for details.
 Connecting Power Cord
User can insert one end into power supply socket, while insert the other end to AC power.
 Connecting Grounding Wire
When the device solely connects to protective ground, it should adopt independent way, say,
share the same ground with other devices. When the device adopts united way, the grounding
resistance should be smaller than 1Ω.
Caution:
Before connecting power cord to D B-8800A-EC Classic Provideo Streaming Encoder, user
should set the power switch to “OFF”.
2.4 Signal Line Connection
Before operating, user should connect all devices requiring cables.
Chapter 3 WEB Operation
User not only can use front buttons to set configuration, but also can control and set the
configuration in computer by connecting the device to web NMS Port. User should ensure that the

10
computer’s IP address is different from the DMB-8800A-EC’s IP address; otherwise, it would cause
IP conflict.
3.1 Login
When proceed the setting of WEB interface configuration, user need to modify computer’s IP
192.168.1.*, the factory default IP of DMB-8800A-EC is: 192.168.1.168
Reset Initialization: the panel has the RST, used for DMB-8800A-EC initial reset, under the
power-on situation, press & hold it for 10s, it will be restarted automatically, so the parameters will
be initialization. After the IP initialized, 192.168.1.168.
1. Set computer’s IP address: 192.168.1.*, Note: * except 168, can select any one of them from
0-254.
2. Open IE, input 192. 168. 1. 168, enter WEB interface, Users’ name: admin; Password: admin.

11
3.2 Status Display
1. Hardware status: if “ collected video frames” increasing, it shows that it has video input;
If display for ‘0’, it shows that it has no video inputs, user need to check the input signals.
NOTE：If it encoding normally, the “ collected video frames “will produce the updated data; If no
data updated, please check your video cable & video source works normally or not.
2. DHCP: If enable the DHCP, display as below
If disable the DHCP, DHCP state is empty , no information

12
3. Main Stream :main stream state
PS: When the ain Stream set as 1080P 60 fps , please closed other streaming
Click “Preview”for preview the streaming
4. Second Stream: second stream state

13
5. Third Stream: third stream state
6. ourth Stream: fourth stream state
3.3 Network Setting

14
Note: the Device IP address: factory default: 192.168.1.168, if user modified it, and forget the IP
address, under the power-on situation, user can press the reset button for 10s, then restart it to
restore factory default.
3.4 Encoding Setting
3.4.1 ain Stream Setting
Video & audio parameters’ settings.
HDMI Main Stream Editing Operation
1. The setting for H.264 Encoding parameter: including H.264 Level, rame rate, bitrate control
and so on.
2. Each HDMI input support 4 streaming output, each streaming output support
HTTP/RTMP/RTSP/HLS/UDP output at the same time , but since the CPU capacity of encoder
is fixed , please don’t use them at the time same, please close the other protocol you don’t use
to save the capacity
3. PS: When the ain Stream set as 1080P 60 fps , pls closed other streamings

15
4. If use RTMP protocol, you need to input your server’s IP address, port, appname and stream
name.
Note: or the Ustream Server Setting Explanation
Note: or the Ustream Server Setting Explanation
E.g: URL: 1.3433929.fme.ustream.tv/ustreamVideo/1234567/key
stream : rtmp:// 1.3433929.fme.ustream.tv/ustreamVideo/1234567/key
/oX0rTdnXe6Kp2PkBt9XGdn22tXAKIdX7
filling-in above URL address to RTMP Publish URL: Such as below:
Below is Adobe lash Media Server setting for users’ reference
1. Install Software: lash+Media+Server3.5, during installation process, don’t need to input Serial
No. , User name and password input: 1
2. Enable Backstage Software:
Note: This software is running at the backstage.
3. Open the older lashPlayer: VideoPlayer.html
4. Input rtmp://ip address/rtmp/hdmi, then choose live, so you can see picture or input
rtmp://192.168.1.100:1935/live/dtvane, select LIVE, click Play stream

16
3.4.2 Second Stream Setting

17
3.4.3 Third Stream Setting
3.4.4 Fourth Stream Setting

18
3.5 Extended Setting
3.5.1 Advanced
3.5.2 CSC Setting
CSC setting for Adjusting Contrast, default 64