FreeWave IOEX-4440 User manual

TM
Z9-IO-PE-ZE
IOEX-4440;
4422; 4404
Quick Start Guide
FreeWave ZumEdge Quick-Start
The ZumEdge is designed to quickly add I/O and application development capability to your Ethernet and serial
IIoT systems. This guide will get you started with configuring the ZumEdge and I/Os to your application, and
introduce you to the application development environment that comes standard on the ZumEdge. To get
started, please follow this guide for initial configuration of the device.
To follow along with your device, you will need at least a ZumEdge base module and a FreeWave IOEX device,
as well as a computer running Windows with a free Ethernet port that you can use to connect to the ZumEdge
device. If no Ethernet port exists, a USB-to-Ethernet adapter will work in an identical way.
The example system used in this quick-start guide is a common tank level monitoring implementation.
We’ll use the ZumEdge to configure an IO module to deliver power to, and receive analog input from, a
tank level sensor, with the assumption that the user will be communicating with the device through a REST
API running on their control application. Once configured, the user will be able to read from, write to, and
fully reconfigure the ZumEdge and IO devices through REST API calls.
Example System Implementation
Data Connectors Four RJ-45 (2 Ethernet, 2 Serial)
USB Connectors Micro USB
Type A (Future Expansion)
RF Connector TNC
Power Connectors Phoenix Contact (#1776692)
Interfaces
Frequency Range* 902 to 928 MHz
Output Power* 10 mW to 1 W; user selectable
Range 97 km (60 miles) with clear line of sight
Channel Spacing 230.4, 345.6, 691.2, 1382.4, 1612.8 (Beta), &
3225.6 kHz
RF Data Rate 115.2, 250, 500 kbps, 1, 1.5 (Beta), & 4 Mbps;
user selectable
Transmitter
Type Frequency Hopping Spread Spectrum
Modulation 2 level GFSK
4- and 8-ary FSK
Link Throughput Up to 1.6 Mbps; 4 Mbps with Compression
Error Detection ARQ and CRC, retransmit on error, FEC
Hopping Rates 400, 200, 100, 50, 25 ms
Hopping Channels* Up to 110; RF Data Rate Dependent
Hopping Patterns Up to 16; RF Data Rate Dependent
Protocol Adaptive Spectrum Learning (ASL)
User Interface Rates Ethernet Rate: 10/100 Mbps
Serial Rate: up to 250 kbps
Data Encryption 128-bit and 256-bit AES CCM
Advanced Features Packet Compression and Aggregation
Data Transmission
CPU ARM Cortex-A8 1 GHz
RAM 1 GB
Storage 1 GB
OS Debian-based Linux
Computing Resources (OPTIONAL UPGRADE)**
Contact FreeWave Sales for information.
**Requires licensing. Contact FreeWave Sales for information.
|ZumLink™ 900 Series
5395 Pearl Parkway
Boulder, CO 80301
Copyright © 2019 FreeWave Technologies, Inc. All rights reserved.
LDS0010AA
TF: 1.866.923.6168
Tel: [phone]
www.freewave.com
Management HTTP, SSH
SNMPv1/v2c/v3, MIB-II, Enterprise MIB,
Modbus
Management
VLAN 802.1Q
Serial TCP server, Modbus/TCP, Modbus RTU,
TCP client
Networking
Operating Voltage +6 to +30 VDC
Current Consumption Voltage Transmit Receive Idle
12 VDC 377 mA 159 mA 143 mA
Power Requirements
Operating
Temperature
Z9-P2: -40ºC to +85ºC (-40°F to +185°F)
Z9-PE2: -40ºC to +75ºC (-40ºF to +167ºF)
Humidity 0 to 95% non-condensing
Dimensions Z9-P2:
170.18 L x 86.6 W x 27.18 H (mm)
6.70 L x 3.41 W x 1.07 H (in)
Z9-PE2:
191.00 L x 104.39 W x 41.91 H (mm)
7.52 L x 4.11 W x 1.65 H (in)
Weight Z9-P2: 200.5 g (0.44 lbs)
Z9-PE2: 750 g (1.7 lbs)
Reliability MTBF 206,186
Safety Class I, Division 2, Groups A-D
UL Z9-P2: Z9-PE2:
General Information
Information to Order
Model Number
Z9-P2 Board Level Unit, 902 to 928 MHz
Z9-PE2 Enclosed Unit, 902 to 928 MHz
Receiver
IF Selectivity > 40 dB
System Gain 135 dB
Sensitivity RF Data Rates Without FEC With FEC
115.2 kbps -105 dBm -108 dBm
250 kbps -102 dBm -105 dBm
500 kbps -99 dBm -102 dBm
1 Mbps -95 dBm -98 dBm
1.5 Mbps (Beta) -90 dBm -93 dBm
4 Mbps -83 dBm -86 dBm
ZumEdge TM
Transmitter Management
Networking
Interfaces
Power Requirements
General Information
Information to Order
Model Number
Receiver
Data Transmission
Computing Resources (OPTIONAL UPGRADE)**
+6 to +30 VDC
0 to 95% non-condensing
165.28 L x 76.89W x 27.55 (mm))
6.51 L x 3.03 W x 1.08 H (Inches)
ZumEdge
IO Expansion
0.5lbs/250C
MTBF 206,186
Class I, Division 2, Groups A-D
Frequency Range*
Output Power*
Range
Management
VLAN
Serial
Traffic Filtering
Data Connectors
USB Connectors
RF Connector
Power Connectors
Operating Voltage
Voltage Transmit Receive Idle
Current Consumption
Humidity
Dimensions
Weight
Reliability
Safety
UL
Z9-IO-PE-ZE
IOEX-4440; 4422;4404
Operating
Temperature
Channel Spacing
RF Data Rater
IF Selectivity
System Gain
Type
Modulation
Link Throughput
Error Detection
Hopping Rates
Hopping Channels*
Hopping Patterns
Protocol
User Interface Rates
Data Encryption
Advanced Features
CPU
RAM
Storage
OS
Sensitivity RF Data Rates Without FEC With FEC
902 to 928 MHz HTTP, SSH
SNMPv1/v2c/v3, MIB-II, Enterprise MIB,
Modbus
802.1Q
Netmask filter, ARP filter
Four RJ-45 (2 Ethernet, 2 Serial)
TNC
Phoenix Contract (#1776692)
+6 to +30 VDC
12 VDC 377 mA 159 mA 143 mA
Micro USB
Type A (Future Expansion)
TCP server, Modbus/TCP, Modbus RTU,
TCP client
10 mW to 1 W: user selectable
97 km (60 miles) with clear line of sight
Frequency Hopping Spread Spectrum
Up to 1.6 Mbps; 4 Mbps with Compression
ARQ and CRC, retransmit on error, FEC
400, 200, 100, 50, 25 ms
Up to 110; RF Data Rate Dependent
Up to 16; RF Data Rate Dependent
Adaptive Spectrum Learning (ASL)
128-bit and 256-bit AES CCM
Packet Compression and Aggregation
ARM Cortex-A8 1 GHz
1 GB
1 GB
Debian-based Linux
> 40 dB
135 dB
115.2 kbps -105 dBm -108 dBm
250 kbps -102 dBm -105 dBm
500 kbps -99 dBm -102 dBm
1 Mbps -95 dBm -98 dBm
1.5 Mbps (Beta) -90 dBm -93 dBm
4 Mbps -83 dBm -86 dBm
230.4, 345.6, 691.2, 1382.4, 1612.8 (Beta), &
3225.6 kHz
115.2, 250, 500 kbps, 1, 1.5 (Beta), &4 Mbps;
user selectable
2 level GFSK
4- and 8-ary FSK
Ethernet Rate; 10/100 Mbps
Serial Rate; up to 250 kbps

1. To start, make sure that your IOEX module is
connected to the ZumEdge through the stack
connectors on the bottom and top of the respective
devices. The modules should be unplugged for the
time being
2. Open Control Panel, and head to the “Network
and Sharing Center” section. If you don’t see this,
change the “View by” selection in the top right of
the window to “Small Icons”
3. Once in the Network
and Sharing Center, click
“Change adapter settings”
on the left hand side.
This should open a new
window.
Congure Ethernet Connection
Data Connectors Four RJ-45 (2 Ethernet, 2 Serial)
USB Connectors Micro USB
Type A (Future Expansion)
RF Connector TNC
Power Connectors Phoenix Contact (#1776692)
Interfaces
Frequency Range* 902 to 928 MHz
Output Power* 10 mW to 1 W; user selectable
Range 97 km (60 miles) with clear line of sight
Channel Spacing 230.4, 345.6, 691.2, 1382.4, 1612.8 (Beta), &
3225.6 kHz
RF Data Rate 115.2, 250, 500 kbps, 1, 1.5 (Beta), & 4 Mbps;
user selectable
Transmitter
Type Frequency Hopping Spread Spectrum
Modulation 2 level GFSK
4- and 8-ary FSK
Link Throughput Up to 1.6 Mbps; 4 Mbps with Compression
Error Detection ARQ and CRC, retransmit on error, FEC
Hopping Rates 400, 200, 100, 50, 25 ms
Hopping Channels* Up to 110; RF Data Rate Dependent
Hopping Patterns Up to 16; RF Data Rate Dependent
Protocol Adaptive Spectrum Learning (ASL)
User Interface Rates Ethernet Rate: 10/100 Mbps
Serial Rate: up to 250 kbps
Data Encryption 128-bit and 256-bit AES CCM
Advanced Features Packet Compression and Aggregation
Data Transmission
CPU ARM Cortex-A8 1 GHz
RAM 1 GB
Storage 1 GB
OS Debian-based Linux
Computing Resources (OPTIONAL UPGRADE)**
Contact FreeWave Sales for information.
**Requires licensing. Contact FreeWave Sales for information.
|ZumLink™ 900 Series
5395 Pearl Parkway
Boulder, CO 80301
Copyright © 2019 FreeWave Technologies, Inc. All rights reserved.
LDS0010AA
TF: 1.866.923.6168
Tel: [phone]
www.freewave.com
Management HTTP, SSH
SNMPv1/v2c/v3, MIB-II, Enterprise MIB,
Modbus
Management
VLAN 802.1Q
Serial TCP server, Modbus/TCP, Modbus RTU,
TCP client
Networking
Operating Voltage +6 to +30 VDC
Current Consumption
Voltage Transmit Receive Idle
12 VDC 377 mA 159 mA 143 mA
Power Requirements
Operating
Temperature
Z9-P2: -40ºC to +85ºC (-40°F to +185°F)
Z9-PE2: -40ºC to +75ºC (-40ºF to +167ºF)
Humidity 0 to 95% non-condensing
Dimensions Z9-P2:
170.18 L x 86.6 W x 27.18 H (mm)
6.70 L x 3.41 W x 1.07 H (in)
Z9-PE2:
191.00 L x 104.39 W x 41.91 H (mm)
7.52 L x 4.11 W x 1.65 H (in)
Weight Z9-P2: 200.5 g (0.44 lbs)
Z9-PE2: 750 g (1.7 lbs)
Reliability MTBF 206,186
Safety Class I, Division 2, Groups A-D
UL Z9-P2: Z9-PE2:
General Information
Information to Order
Model Number
Z9-P2 Board Level Unit, 902 to 928 MHz
Z9-PE2 Enclosed Unit, 902 to 928 MHz
Receiver
IF Selectivity > 40 dB
System Gain 135 dB
Sensitivity
RF Data Rates Without FEC With FEC
115.2 kbps -105 dBm -108 dBm
250 kbps -102 dBm -105 dBm
500 kbps -99 dBm -102 dBm
1 Mbps -95 dBm -98 dBm
1.5 Mbps (Beta) -90 dBm -93 dBm
4 Mbps -83 dBm -86 dBm
ZumEdge TM
Transmitter Management
Networking
Interfaces
Power Requirements
General Information
Information to Order
Model Number
Receiver
Data Transmission
Computing Resources (OPTIONAL UPGRADE)**
+6 to +30 VDC
0 to 95% non-condensing
165.28 L x 76.89W x 27.55 (mm))
6.51 L x 3.03 W x 1.08 H (Inches)
ZumEdge
IO Expansion
0.5lbs/250C
MTBF 206,186
Class I, Division 2, Groups A-D
Frequency Range*
Output Power*
Range
Management
VLAN
Serial
Traffic Filtering
Data Connectors
USB Connectors
RF Connector
Power Connectors
Operating Voltage
Voltage Transmit Receive Idle
Current Consumption
Humidity
Dimensions
Weight
Reliability
Safety
UL
Z9-IO-PE-ZE
IOEX-4440; 4422;4404
Operating
Temperature
Channel Spacing
RF Data Rater
IF Selectivity
System Gain
Type
Modulation
Link Throughput
Error Detection
Hopping Rates
Hopping Channels*
Hopping Patterns
Protocol
User Interface Rates
Data Encryption
Advanced Features
CPU
RAM
Storage
OS
Sensitivity RF Data Rates Without FEC With FEC
902 to 928 MHz HTTP, SSH
SNMPv1/v2c/v3, MIB-II, Enterprise MIB,
Modbus
802.1Q
Netmask filter, ARP filter
Four RJ-45 (2 Ethernet, 2 Serial)
TNC
Phoenix Contract (#1776692)
+6 to +30 VDC
12 VDC 377 mA 159 mA 143 mA
Micro USB
Type A (Future Expansion)
TCP server, Modbus/TCP, Modbus RTU,
TCP client
10 mW to 1 W: user selectable
97 km (60 miles) with clear line of sight
Frequency Hopping Spread Spectrum
Up to 1.6 Mbps; 4 Mbps with Compression
ARQ and CRC, retransmit on error, FEC
400, 200, 100, 50, 25 ms
Up to 110; RF Data Rate Dependent
Up to 16; RF Data Rate Dependent
Adaptive Spectrum Learning (ASL)
128-bit and 256-bit AES CCM
Packet Compression and Aggregation
ARM Cortex-A8 1 GHz
1 GB
1 GB
Debian-based Linux
> 40 dB
135 dB
115.2 kbps -105 dBm -108 dBm
250 kbps -102 dBm -105 dBm
500 kbps -99 dBm -102 dBm
1 Mbps -95 dBm -98 dBm
1.5 Mbps (Beta) -90 dBm -93 dBm
4 Mbps -83 dBm -86 dBm
230.4, 345.6, 691.2, 1382.4, 1612.8 (Beta), &
3225.6 kHz
115.2, 250, 500 kbps, 1, 1.5 (Beta), &4 Mbps;
user selectable
2 level GFSK
4- and 8-ary FSK
Ethernet Rate; 10/100 Mbps
Serial Rate; up to 250 kbps

4. If you are using a USB to Ethernet adapter,
plug it in to your computer’s USB port now.
You should see a new device pop up. If you are
using an existing free Ethernet port, choose the
port you will be using to connect the ZumEdge.
Double click on the device to bring up the
Properties menu.
7. Click OK for the previous two windows and close the rest.
8. Power on and plug in your ZumEdge to the Ethernet port using the jack labeled “Ethernet”
9. Open a browser (Firefox or Chrome preferred) and navigate to http://192.168.111.100 to see the main
web page for the ZumEdge.
5. Somewhere in the list that pops up should be
“Internet Protocol Version 4 (TCP/IPv4)”. Make sure
the check box next to it is checked and double click
the entry
6. In the window that pops up, check “Use the
following IP address” and enter the following
a. IP Address: 192.168.111.1
b. Subnet mask: 255.255.255.0
c. You can leave default gateway empty.
Data Connectors Four RJ-45 (2 Ethernet, 2 Serial)
USB Connectors Micro USB
Type A (Future Expansion)
RF Connector TNC
Power Connectors Phoenix Contact (#1776692)
Interfaces
Frequency Range* 902 to 928 MHz
Output Power* 10 mW to 1 W; user selectable
Range 97 km (60 miles) with clear line of sight
Channel Spacing 230.4, 345.6, 691.2, 1382.4, 1612.8 (Beta), &
3225.6 kHz
RF Data Rate 115.2, 250, 500 kbps, 1, 1.5 (Beta), & 4 Mbps;
user selectable
Transmitter
Type Frequency Hopping Spread Spectrum
Modulation 2 level GFSK
4- and 8-ary FSK
Link Throughput Up to 1.6 Mbps; 4 Mbps with Compression
Error Detection ARQ and CRC, retransmit on error, FEC
Hopping Rates 400, 200, 100, 50, 25 ms
Hopping Channels* Up to 110; RF Data Rate Dependent
Hopping Patterns Up to 16; RF Data Rate Dependent
Protocol Adaptive Spectrum Learning (ASL)
User Interface Rates Ethernet Rate: 10/100 Mbps
Serial Rate: up to 250 kbps
Data Encryption 128-bit and 256-bit AES CCM
Advanced Features Packet Compression and Aggregation
Data Transmission
CPU ARM Cortex-A8 1 GHz
RAM 1 GB
Storage 1 GB
OS Debian-based Linux
Computing Resources (OPTIONAL UPGRADE)**
Contact FreeWave Sales for information.
**Requires licensing. Contact FreeWave Sales for information.
|ZumLink™ 900 Series
5395 Pearl Parkway
Boulder, CO 80301
Copyright © 2019 FreeWave Technologies, Inc. All rights reserved.
LDS0010AA
TF: 1.866.923.6168
Tel: [phone]
www.freewave.com
Management HTTP, SSH
SNMPv1/v2c/v3, MIB-II, Enterprise MIB,
Modbus
Management
VLAN 802.1Q
Serial TCP server, Modbus/TCP, Modbus RTU,
TCP client
Networking
Operating Voltage +6 to +30 VDC
Current Consumption
Voltage Transmit Receive Idle
12 VDC 377 mA 159 mA 143 mA
Power Requirements
Operating
Temperature
Z9-P2: -40ºC to +85ºC (-40°F to +185°F)
Z9-PE2: -40ºC to +75ºC (-40ºF to +167ºF)
Humidity 0 to 95% non-condensing
Dimensions Z9-P2:
170.18 L x 86.6 W x 27.18 H (mm)
6.70 L x 3.41 W x 1.07 H (in)
Z9-PE2:
191.00 L x 104.39 W x 41.91 H (mm)
7.52 L x 4.11 W x 1.65 H (in)
Weight Z9-P2: 200.5 g (0.44 lbs)
Z9-PE2: 750 g (1.7 lbs)
Reliability MTBF 206,186
Safety Class I, Division 2, Groups A-D
UL Z9-P2: Z9-PE2:
General Information
Information to Order
Model Number
Z9-P2 Board Level Unit, 902 to 928 MHz
Z9-PE2 Enclosed Unit, 902 to 928 MHz
Receiver
IF Selectivity > 40 dB
System Gain 135 dB
Sensitivity
RF Data Rates Without FEC With FEC
115.2 kbps -105 dBm -108 dBm
250 kbps -102 dBm -105 dBm
500 kbps -99 dBm -102 dBm
1 Mbps -95 dBm -98 dBm
1.5 Mbps (Beta) -90 dBm -93 dBm
4 Mbps -83 dBm -86 dBm
ZumEdge TM
Transmitter Management
Networking
Interfaces
Power Requirements
General Information
Information to Order
Model Number
Receiver
Data Transmission
Computing Resources (OPTIONAL UPGRADE)**
+6 to +30 VDC
0 to 95% non-condensing
165.28 L x 76.89W x 27.55 (mm))
6.51 L x 3.03 W x 1.08 H (Inches)
ZumEdge
IO Expansion
0.5lbs/250C
MTBF 206,186
Class I, Division 2, Groups A-D
Frequency Range*
Output Power*
Range
Management
VLAN
Serial
Traffic Filtering
Data Connectors
USB Connectors
RF Connector
Power Connectors
Operating Voltage
Voltage Transmit Receive Idle
Current Consumption
Humidity
Dimensions
Weight
Reliability
Safety
UL
Z9-IO-PE-ZE
IOEX-4440; 4422;4404
Operating
Temperature
Channel Spacing
RF Data Rater
IF Selectivity
System Gain
Type
Modulation
Link Throughput
Error Detection
Hopping Rates
Hopping Channels*
Hopping Patterns
Protocol
User Interface Rates
Data Encryption
Advanced Features
CPU
RAM
Storage
OS
Sensitivity RF Data Rates Without FEC With FEC
902 to 928 MHz HTTP, SSH
SNMPv1/v2c/v3, MIB-II, Enterprise MIB,
Modbus
802.1Q
Netmask filter, ARP filter
Four RJ-45 (2 Ethernet, 2 Serial)
TNC
Phoenix Contract (#1776692)
+6 to +30 VDC
12 VDC 377 mA 159 mA 143 mA
Micro USB
Type A (Future Expansion)
TCP server, Modbus/TCP, Modbus RTU,
TCP client
10 mW to 1 W: user selectable
97 km (60 miles) with clear line of sight
Frequency Hopping Spread Spectrum
Up to 1.6 Mbps; 4 Mbps with Compression
ARQ and CRC, retransmit on error, FEC
400, 200, 100, 50, 25 ms
Up to 110; RF Data Rate Dependent
Up to 16; RF Data Rate Dependent
Adaptive Spectrum Learning (ASL)
128-bit and 256-bit AES CCM
Packet Compression and Aggregation
ARM Cortex-A8 1 GHz
1 GB
1 GB
Debian-based Linux
> 40 dB
135 dB
115.2 kbps -105 dBm -108 dBm
250 kbps -102 dBm -105 dBm
500 kbps -99 dBm -102 dBm
1 Mbps -95 dBm -98 dBm
1.5 Mbps (Beta) -90 dBm -93 dBm
4 Mbps -83 dBm -86 dBm
230.4, 345.6, 691.2, 1382.4, 1612.8 (Beta), &
3225.6 kHz
115.2, 250, 500 kbps, 1, 1.5 (Beta), &4 Mbps;
user selectable
2 level GFSK
4- and 8-ary FSK
Ethernet Rate; 10/100 Mbps
Serial Rate; up to 250 kbps

10. Click the “Local I/O” tab at the top.
11. When prompted, username is “admin” and
password is “admin”
12. You will be greeted with the IO conguration
page. On the left column, you will see a listing of
IO modules connected to the device. On the right
column you will see a listing of IO channels for the
selected module. To start, your module should be
named “unnamed” and your channels should be
named “Channel x”.
13. To begin with conguration, let’s rename the
elements to something more descriptive. Click the
“Edit Name” link near the top of the page to change
the name of the IOEX module.
14. In the pop-up window, change the name to
“Sensor Bank 1” to represent a bank of sensors
connected to the module. Click “OK”.
Congure I/O
Data Connectors Four RJ-45 (2 Ethernet, 2 Serial)
USB Connectors Micro USB
Type A (Future Expansion)
RF Connector TNC
Power Connectors Phoenix Contact (#1776692)
Interfaces
Frequency Range* 902 to 928 MHz
Output Power* 10 mW to 1 W; user selectable
Range 97 km (60 miles) with clear line of sight
Channel Spacing 230.4, 345.6, 691.2, 1382.4, 1612.8 (Beta), &
3225.6 kHz
RF Data Rate 115.2, 250, 500 kbps, 1, 1.5 (Beta), & 4 Mbps;
user selectable
Transmitter
Type Frequency Hopping Spread Spectrum
Modulation 2 level GFSK
4- and 8-ary FSK
Link Throughput Up to 1.6 Mbps; 4 Mbps with Compression
Error Detection ARQ and CRC, retransmit on error, FEC
Hopping Rates 400, 200, 100, 50, 25 ms
Hopping Channels* Up to 110; RF Data Rate Dependent
Hopping Patterns Up to 16; RF Data Rate Dependent
Protocol Adaptive Spectrum Learning (ASL)
User Interface Rates Ethernet Rate: 10/100 Mbps
Serial Rate: up to 250 kbps
Data Encryption 128-bit and 256-bit AES CCM
Advanced Features Packet Compression and Aggregation
Data Transmission
CPU ARM Cortex-A8 1 GHz
RAM 1 GB
Storage 1 GB
OS Debian-based Linux
Computing Resources (OPTIONAL UPGRADE)**
Contact FreeWave Sales for information.
**Requires licensing. Contact FreeWave Sales for information.
|ZumLink™ 900 Series
5395 Pearl Parkway
Boulder, CO 80301
Copyright © 2019 FreeWave Technologies, Inc. All rights reserved.
LDS0010AA
TF: 1.866.923.6168
Tel: [phone]
www.freewave.com
Management HTTP, SSH
SNMPv1/v2c/v3, MIB-II, Enterprise MIB,
Modbus
Management
VLAN 802.1Q
Serial TCP server, Modbus/TCP, Modbus RTU,
TCP client
Networking
Operating Voltage +6 to +30 VDC
Current Consumption
Voltage Transmit Receive Idle
12 VDC 377 mA 159 mA 143 mA
Power Requirements
Operating
Temperature
Z9-P2: -40ºC to +85ºC (-40°F to +185°F)
Z9-PE2: -40ºC to +75ºC (-40ºF to +167ºF)
Humidity 0 to 95% non-condensing
Dimensions Z9-P2:
170.18 L x 86.6 W x 27.18 H (mm)
6.70 L x 3.41 W x 1.07 H (in)
Z9-PE2:
191.00 L x 104.39 W x 41.91 H (mm)
7.52 L x 4.11 W x 1.65 H (in)
Weight Z9-P2: 200.5 g (0.44 lbs)
Z9-PE2: 750 g (1.7 lbs)
Reliability MTBF 206,186
Safety Class I, Division 2, Groups A-D
UL Z9-P2: Z9-PE2:
General Information
Information to Order
Model Number
Z9-P2 Board Level Unit, 902 to 928 MHz
Z9-PE2 Enclosed Unit, 902 to 928 MHz
Receiver
IF Selectivity > 40 dB
System Gain 135 dB
Sensitivity
RF Data Rates Without FEC With FEC
115.2 kbps -105 dBm -108 dBm
250 kbps -102 dBm -105 dBm
500 kbps -99 dBm -102 dBm
1 Mbps -95 dBm -98 dBm
1.5 Mbps (Beta) -90 dBm -93 dBm
4 Mbps -83 dBm -86 dBm
ZumEdge TM
Transmitter Management
Networking
Interfaces
Power Requirements
General Information
Information to Order
Model Number
Receiver
Data Transmission
Computing Resources (OPTIONAL UPGRADE)**
+6 to +30 VDC
0 to 95% non-condensing
165.28 L x 76.89W x 27.55 (mm))
6.51 L x 3.03 W x 1.08 H (Inches)
ZumEdge
IO Expansion
0.5lbs/250C
MTBF 206,186
Class I, Division 2, Groups A-D
Frequency Range*
Output Power*
Range
Management
VLAN
Serial
Traffic Filtering
Data Connectors
USB Connectors
RF Connector
Power Connectors
Operating Voltage
Voltage Transmit Receive Idle
Current Consumption
Humidity
Dimensions
Weight
Reliability
Safety
UL
Z9-IO-PE-ZE
IOEX-4440; 4422;4404
Operating
Temperature
Channel Spacing
RF Data Rater
IF Selectivity
System Gain
Type
Modulation
Link Throughput
Error Detection
Hopping Rates
Hopping Channels*
Hopping Patterns
Protocol
User Interface Rates
Data Encryption
Advanced Features
CPU
RAM
Storage
OS
Sensitivity RF Data Rates Without FEC With FEC
902 to 928 MHz HTTP, SSH
SNMPv1/v2c/v3, MIB-II, Enterprise MIB,
Modbus
802.1Q
Netmask filter, ARP filter
Four RJ-45 (2 Ethernet, 2 Serial)
TNC
Phoenix Contract (#1776692)
+6 to +30 VDC
12 VDC 377 mA 159 mA 143 mA
Micro USB
Type A (Future Expansion)
TCP server, Modbus/TCP, Modbus RTU,
TCP client
10 mW to 1 W: user selectable
97 km (60 miles) with clear line of sight
Frequency Hopping Spread Spectrum
Up to 1.6 Mbps; 4 Mbps with Compression
ARQ and CRC, retransmit on error, FEC
400, 200, 100, 50, 25 ms
Up to 110; RF Data Rate Dependent
Up to 16; RF Data Rate Dependent
Adaptive Spectrum Learning (ASL)
128-bit and 256-bit AES CCM
Packet Compression and Aggregation
ARM Cortex-A8 1 GHz
1 GB
1 GB
Debian-based Linux
> 40 dB
135 dB
115.2 kbps -105 dBm -108 dBm
250 kbps -102 dBm -105 dBm
500 kbps -99 dBm -102 dBm
1 Mbps -95 dBm -98 dBm
1.5 Mbps (Beta) -90 dBm -93 dBm
4 Mbps -83 dBm -86 dBm
230.4, 345.6, 691.2, 1382.4, 1612.8 (Beta), &
3225.6 kHz
115.2, 250, 500 kbps, 1, 1.5 (Beta), &4 Mbps;
user selectable
2 level GFSK
4- and 8-ary FSK
Ethernet Rate; 10/100 Mbps
Serial Rate; up to 250 kbps

15. For this exercise, we’re going to assume that we’re using an imaginary tank level sensor that has two
lines:
16. We’ll start by conguring a “Sensor Power” line on the IOEX module. To congure the channel, click on
the pencil icon to the right of the “Channel 1” box.
a. A sensor power line that requires 12VDC
b. An analog output line that outputs 0-12V, proportional to the tank level
17. When the conguration window opens, click the
“Edit Name” link to change the name of the channel
to “Tank Sensor Power”. Click “OK”
18. Next, click the drop-down menu at the top-
right of the channel window. This will present a list
of conguration options for this channel. Choose
“Sensor Power” for this channel.
a. Note: The available options depend on what
type of channel this IOEX module has. In our
case, Channel 1 is a “Universal” channel and
can be congured in all available orientations.
Data Connectors Four RJ-45 (2 Ethernet, 2 Serial)
USB Connectors Micro USB
Type A (Future Expansion)
RF Connector TNC
Power Connectors Phoenix Contact (#1776692)
Interfaces
Frequency Range* 902 to 928 MHz
Output Power* 10 mW to 1 W; user selectable
Range 97 km (60 miles) with clear line of sight
Channel Spacing 230.4, 345.6, 691.2, 1382.4, 1612.8 (Beta), &
3225.6 kHz
RF Data Rate 115.2, 250, 500 kbps, 1, 1.5 (Beta), & 4 Mbps;
user selectable
Transmitter
Type Frequency Hopping Spread Spectrum
Modulation 2 level GFSK
4- and 8-ary FSK
Link Throughput Up to 1.6 Mbps; 4 Mbps with Compression
Error Detection ARQ and CRC, retransmit on error, FEC
Hopping Rates 400, 200, 100, 50, 25 ms
Hopping Channels* Up to 110; RF Data Rate Dependent
Hopping Patterns Up to 16; RF Data Rate Dependent
Protocol Adaptive Spectrum Learning (ASL)
User Interface Rates Ethernet Rate: 10/100 Mbps
Serial Rate: up to 250 kbps
Data Encryption 128-bit and 256-bit AES CCM
Advanced Features Packet Compression and Aggregation
Data Transmission
CPU ARM Cortex-A8 1 GHz
RAM 1 GB
Storage 1 GB
OS Debian-based Linux
Computing Resources (OPTIONAL UPGRADE)**
Contact FreeWave Sales for information.
**Requires licensing. Contact FreeWave Sales for information.
|ZumLink™ 900 Series
5395 Pearl Parkway
Boulder, CO 80301
Copyright © 2019 FreeWave Technologies, Inc. All rights reserved.
LDS0010AA
TF: 1.866.923.6168
Tel: [phone]
www.freewave.com
Management HTTP, SSH
SNMPv1/v2c/v3, MIB-II, Enterprise MIB,
Modbus
Management
VLAN 802.1Q
Serial TCP server, Modbus/TCP, Modbus RTU,
TCP client
Networking
Operating Voltage +6 to +30 VDC
Current Consumption
Voltage Transmit Receive Idle
12 VDC 377 mA 159 mA 143 mA
Power Requirements
Operating
Temperature
Z9-P2: -40ºC to +85ºC (-40°F to +185°F)
Z9-PE2: -40ºC to +75ºC (-40ºF to +167ºF)
Humidity 0 to 95% non-condensing
Dimensions Z9-P2:
170.18 L x 86.6 W x 27.18 H (mm)
6.70 L x 3.41 W x 1.07 H (in)
Z9-PE2:
191.00 L x 104.39 W x 41.91 H (mm)
7.52 L x 4.11 W x 1.65 H (in)
Weight Z9-P2: 200.5 g (0.44 lbs)
Z9-PE2: 750 g (1.7 lbs)
Reliability MTBF 206,186
Safety Class I, Division 2, Groups A-D
UL Z9-P2: Z9-PE2:
General Information
Information to Order
Model Number
Z9-P2 Board Level Unit, 902 to 928 MHz
Z9-PE2 Enclosed Unit, 902 to 928 MHz
Receiver
IF Selectivity > 40 dB
System Gain 135 dB
Sensitivity
RF Data Rates Without FEC With FEC
115.2 kbps -105 dBm -108 dBm
250 kbps -102 dBm -105 dBm
500 kbps -99 dBm -102 dBm
1 Mbps -95 dBm -98 dBm
1.5 Mbps (Beta) -90 dBm -93 dBm
4 Mbps -83 dBm -86 dBm
ZumEdge TM
Transmitter Management
Networking
Interfaces
Power Requirements
General Information
Information to Order
Model Number
Receiver
Data Transmission
Computing Resources (OPTIONAL UPGRADE)**
+6 to +30 VDC
0 to 95% non-condensing
165.28 L x 76.89W x 27.55 (mm))
6.51 L x 3.03 W x 1.08 H (Inches)
ZumEdge
IO Expansion
0.5lbs/250C
MTBF 206,186
Class I, Division 2, Groups A-D
Frequency Range*
Output Power*
Range
Management
VLAN
Serial
Traffic Filtering
Data Connectors
USB Connectors
RF Connector
Power Connectors
Operating Voltage
Voltage Transmit Receive Idle
Current Consumption
Humidity
Dimensions
Weight
Reliability
Safety
UL
Z9-IO-PE-ZE
IOEX-4440; 4422;4404
Operating
Temperature
Channel Spacing
RF Data Rater
IF Selectivity
System Gain
Type
Modulation
Link Throughput
Error Detection
Hopping Rates
Hopping Channels*
Hopping Patterns
Protocol
User Interface Rates
Data Encryption
Advanced Features
CPU
RAM
Storage
OS
Sensitivity RF Data Rates Without FEC With FEC
902 to 928 MHz HTTP, SSH
SNMPv1/v2c/v3, MIB-II, Enterprise MIB,
Modbus
802.1Q
Netmask filter, ARP filter
Four RJ-45 (2 Ethernet, 2 Serial)
TNC
Phoenix Contract (#1776692)
+6 to +30 VDC
12 VDC 377 mA 159 mA 143 mA
Micro USB
Type A (Future Expansion)
TCP server, Modbus/TCP, Modbus RTU,
TCP client
10 mW to 1 W: user selectable
97 km (60 miles) with clear line of sight
Frequency Hopping Spread Spectrum
Up to 1.6 Mbps; 4 Mbps with Compression
ARQ and CRC, retransmit on error, FEC
400, 200, 100, 50, 25 ms
Up to 110; RF Data Rate Dependent
Up to 16; RF Data Rate Dependent
Adaptive Spectrum Learning (ASL)
128-bit and 256-bit AES CCM
Packet Compression and Aggregation
ARM Cortex-A8 1 GHz
1 GB
1 GB
Debian-based Linux
> 40 dB
135 dB
115.2 kbps -105 dBm -108 dBm
250 kbps -102 dBm -105 dBm
500 kbps -99 dBm -102 dBm
1 Mbps -95 dBm -98 dBm
1.5 Mbps (Beta) -90 dBm -93 dBm
4 Mbps -83 dBm -86 dBm
230.4, 345.6, 691.2, 1382.4, 1612.8 (Beta), &
3225.6 kHz
115.2, 250, 500 kbps, 1, 1.5 (Beta), &4 Mbps;
user selectable
2 level GFSK
4- and 8-ary FSK
Ethernet Rate; 10/100 Mbps
Serial Rate; up to 250 kbps

19. The “Sensor Power” conguration options will
appear in the window. For this exercise, click on the
drop-down menu next to the “Default Power State”
button, and select “On”
a. Note: If you are unsure of what a setting
means, you can hover over the setting label
and a “tooltip” window will appear.
20. To save this new setting, click the “Save” button. A “Writing Changes” message will appear. This
indicates that the ZumEdge is writing these changes to the IOEX module.
22. Click “Exit” to close the conguration window.
23. Next, let’s congure a second channel to be the analog input. Click the pencil icon on the right side of
the “Channel 2” box.
24. Change the name of this channel to “Tank Sensor Input” by clicking the “Edit Name” icon as before.
21. Once the pin is congured, a switch
at the bottom left of the channel window
will become active. This is your manual
control for this channel. Click it to
the “On” position to turn the channel
“on” and start delivering power to our
imaginary device.
Data Connectors Four RJ-45 (2 Ethernet, 2 Serial)
USB Connectors Micro USB
Type A (Future Expansion)
RF Connector TNC
Power Connectors Phoenix Contact (#1776692)
Interfaces
Frequency Range* 902 to 928 MHz
Output Power* 10 mW to 1 W; user selectable
Range 97 km (60 miles) with clear line of sight
Channel Spacing 230.4, 345.6, 691.2, 1382.4, 1612.8 (Beta), &
3225.6 kHz
RF Data Rate 115.2, 250, 500 kbps, 1, 1.5 (Beta), & 4 Mbps;
user selectable
Transmitter
Type Frequency Hopping Spread Spectrum
Modulation 2 level GFSK
4- and 8-ary FSK
Link Throughput Up to 1.6 Mbps; 4 Mbps with Compression
Error Detection ARQ and CRC, retransmit on error, FEC
Hopping Rates 400, 200, 100, 50, 25 ms
Hopping Channels* Up to 110; RF Data Rate Dependent
Hopping Patterns Up to 16; RF Data Rate Dependent
Protocol Adaptive Spectrum Learning (ASL)
User Interface Rates Ethernet Rate: 10/100 Mbps
Serial Rate: up to 250 kbps
Data Encryption 128-bit and 256-bit AES CCM
Advanced Features Packet Compression and Aggregation
Data Transmission
CPU ARM Cortex-A8 1 GHz
RAM 1 GB
Storage 1 GB
OS Debian-based Linux
Computing Resources (OPTIONAL UPGRADE)**
Contact FreeWave Sales for information.
**Requires licensing. Contact FreeWave Sales for information.
|ZumLink™ 900 Series
5395 Pearl Parkway
Boulder, CO 80301
Copyright © 2019 FreeWave Technologies, Inc. All rights reserved.
LDS0010AA
TF: 1.866.923.6168
Tel: [phone]
www.freewave.com
Management HTTP, SSH
SNMPv1/v2c/v3, MIB-II, Enterprise MIB,
Modbus
Management
VLAN 802.1Q
Serial TCP server, Modbus/TCP, Modbus RTU,
TCP client
Networking
Operating Voltage +6 to +30 VDC
Current Consumption
Voltage Transmit Receive Idle
12 VDC 377 mA 159 mA 143 mA
Power Requirements
Operating
Temperature
Z9-P2: -40ºC to +85ºC (-40°F to +185°F)
Z9-PE2: -40ºC to +75ºC (-40ºF to +167ºF)
Humidity 0 to 95% non-condensing
Dimensions Z9-P2:
170.18 L x 86.6 W x 27.18 H (mm)
6.70 L x 3.41 W x 1.07 H (in)
Z9-PE2:
191.00 L x 104.39 W x 41.91 H (mm)
7.52 L x 4.11 W x 1.65 H (in)
Weight Z9-P2: 200.5 g (0.44 lbs)
Z9-PE2: 750 g (1.7 lbs)
Reliability MTBF 206,186
Safety Class I, Division 2, Groups A-D
UL Z9-P2: Z9-PE2:
General Information
Information to Order
Model Number
Z9-P2 Board Level Unit, 902 to 928 MHz
Z9-PE2 Enclosed Unit, 902 to 928 MHz
Receiver
IF Selectivity > 40 dB
System Gain 135 dB
Sensitivity
RF Data Rates Without FEC With FEC
115.2 kbps -105 dBm -108 dBm
250 kbps -102 dBm -105 dBm
500 kbps -99 dBm -102 dBm
1 Mbps -95 dBm -98 dBm
1.5 Mbps (Beta) -90 dBm -93 dBm
4 Mbps -83 dBm -86 dBm
ZumEdge TM
Transmitter Management
Networking
Interfaces
Power Requirements
General Information
Information to Order
Model Number
Receiver
Data Transmission
Computing Resources (OPTIONAL UPGRADE)**
+6 to +30 VDC
0 to 95% non-condensing
165.28 L x 76.89W x 27.55 (mm))
6.51 L x 3.03 W x 1.08 H (Inches)
ZumEdge
IO Expansion
0.5lbs/250C
MTBF 206,186
Class I, Division 2, Groups A-D
Frequency Range*
Output Power*
Range
Management
VLAN
Serial
Traffic Filtering
Data Connectors
USB Connectors
RF Connector
Power Connectors
Operating Voltage
Voltage Transmit Receive Idle
Current Consumption
Humidity
Dimensions
Weight
Reliability
Safety
UL
Z9-IO-PE-ZE
IOEX-4440; 4422;4404
Operating
Temperature
Channel Spacing
RF Data Rater
IF Selectivity
System Gain
Type
Modulation
Link Throughput
Error Detection
Hopping Rates
Hopping Channels*
Hopping Patterns
Protocol
User Interface Rates
Data Encryption
Advanced Features
CPU
RAM
Storage
OS
Sensitivity RF Data Rates Without FEC With FEC
902 to 928 MHz HTTP, SSH
SNMPv1/v2c/v3, MIB-II, Enterprise MIB,
Modbus
802.1Q
Netmask filter, ARP filter
Four RJ-45 (2 Ethernet, 2 Serial)
TNC
Phoenix Contract (#1776692)
+6 to +30 VDC
12 VDC 377 mA 159 mA 143 mA
Micro USB
Type A (Future Expansion)
TCP server, Modbus/TCP, Modbus RTU,
TCP client
10 mW to 1 W: user selectable
97 km (60 miles) with clear line of sight
Frequency Hopping Spread Spectrum
Up to 1.6 Mbps; 4 Mbps with Compression
ARQ and CRC, retransmit on error, FEC
400, 200, 100, 50, 25 ms
Up to 110; RF Data Rate Dependent
Up to 16; RF Data Rate Dependent
Adaptive Spectrum Learning (ASL)
128-bit and 256-bit AES CCM
Packet Compression and Aggregation
ARM Cortex-A8 1 GHz
1 GB
1 GB
Debian-based Linux
> 40 dB
135 dB
115.2 kbps -105 dBm -108 dBm
250 kbps -102 dBm -105 dBm
500 kbps -99 dBm -102 dBm
1 Mbps -95 dBm -98 dBm
1.5 Mbps (Beta) -90 dBm -93 dBm
4 Mbps -83 dBm -86 dBm
230.4, 345.6, 691.2, 1382.4, 1612.8 (Beta), &
3225.6 kHz
115.2, 250, 500 kbps, 1, 1.5 (Beta), &4 Mbps;
user selectable
2 level GFSK
4- and 8-ary FSK
Ethernet Rate; 10/100 Mbps
Serial Rate; up to 250 kbps

26. The channel conguration options are now visible in the window. Our imaginary sensor outputs a
signal from 0-12V, so set the “Voltage Range (mV)” setting to 12000 to set the input range.
27. Click the “Save” button. The ZumEdge will then write this conguration to the IOEX module.
25. Click the drop-down menu at the top right of the window and select “Analog Input” to congure this
channel as an analog input. Your channel screen should now look like this:
a. Have a look at the other settings.
This IO can be congured to accept
a wide range of analog voltage
and current inputs, and has built in
running-average functionality for
noisy inputs.
Data Connectors Four RJ-45 (2 Ethernet, 2 Serial)
USB Connectors Micro USB
Type A (Future Expansion)
RF Connector TNC
Power Connectors Phoenix Contact (#1776692)
Interfaces
Frequency Range* 902 to 928 MHz
Output Power* 10 mW to 1 W; user selectable
Range 97 km (60 miles) with clear line of sight
Channel Spacing 230.4, 345.6, 691.2, 1382.4, 1612.8 (Beta), &
3225.6 kHz
RF Data Rate 115.2, 250, 500 kbps, 1, 1.5 (Beta), & 4 Mbps;
user selectable
Transmitter
Type Frequency Hopping Spread Spectrum
Modulation 2 level GFSK
4- and 8-ary FSK
Link Throughput Up to 1.6 Mbps; 4 Mbps with Compression
Error Detection ARQ and CRC, retransmit on error, FEC
Hopping Rates 400, 200, 100, 50, 25 ms
Hopping Channels* Up to 110; RF Data Rate Dependent
Hopping Patterns Up to 16; RF Data Rate Dependent
Protocol Adaptive Spectrum Learning (ASL)
User Interface Rates Ethernet Rate: 10/100 Mbps
Serial Rate: up to 250 kbps
Data Encryption 128-bit and 256-bit AES CCM
Advanced Features Packet Compression and Aggregation
Data Transmission
CPU ARM Cortex-A8 1 GHz
RAM 1 GB
Storage 1 GB
OS Debian-based Linux
Computing Resources (OPTIONAL UPGRADE)**
Contact FreeWave Sales for information.
**Requires licensing. Contact FreeWave Sales for information.
|ZumLink™ 900 Series
5395 Pearl Parkway
Boulder, CO 80301
Copyright © 2019 FreeWave Technologies, Inc. All rights reserved.
LDS0010AA
TF: 1.866.923.6168
Tel: [phone]
www.freewave.com
Management HTTP, SSH
SNMPv1/v2c/v3, MIB-II, Enterprise MIB,
Modbus
Management
VLAN 802.1Q
Serial TCP server, Modbus/TCP, Modbus RTU,
TCP client
Networking
Operating Voltage +6 to +30 VDC
Current Consumption
Voltage Transmit Receive Idle
12 VDC 377 mA 159 mA 143 mA
Power Requirements
Operating
Temperature
Z9-P2: -40ºC to +85ºC (-40°F to +185°F)
Z9-PE2: -40ºC to +75ºC (-40ºF to +167ºF)
Humidity 0 to 95% non-condensing
Dimensions Z9-P2:
170.18 L x 86.6 W x 27.18 H (mm)
6.70 L x 3.41 W x 1.07 H (in)
Z9-PE2:
191.00 L x 104.39 W x 41.91 H (mm)
7.52 L x 4.11 W x 1.65 H (in)
Weight Z9-P2: 200.5 g (0.44 lbs)
Z9-PE2: 750 g (1.7 lbs)
Reliability MTBF 206,186
Safety Class I, Division 2, Groups A-D
UL Z9-P2: Z9-PE2:
General Information
Information to Order
Model Number
Z9-P2 Board Level Unit, 902 to 928 MHz
Z9-PE2 Enclosed Unit, 902 to 928 MHz
Receiver
IF Selectivity > 40 dB
System Gain 135 dB
Sensitivity
RF Data Rates Without FEC With FEC
115.2 kbps -105 dBm -108 dBm
250 kbps -102 dBm -105 dBm
500 kbps -99 dBm -102 dBm
1 Mbps -95 dBm -98 dBm
1.5 Mbps (Beta) -90 dBm -93 dBm
4 Mbps -83 dBm -86 dBm
ZumEdge TM
Transmitter Management
Networking
Interfaces
Power Requirements
General Information
Information to Order
Model Number
Receiver
Data Transmission
Computing Resources (OPTIONAL UPGRADE)**
+6 to +30 VDC
0 to 95% non-condensing
165.28 L x 76.89W x 27.55 (mm))
6.51 L x 3.03 W x 1.08 H (Inches)
ZumEdge
IO Expansion
0.5lbs/250C
MTBF 206,186
Class I, Division 2, Groups A-D
Frequency Range*
Output Power*
Range
Management
VLAN
Serial
Traffic Filtering
Data Connectors
USB Connectors
RF Connector
Power Connectors
Operating Voltage
Voltage Transmit Receive Idle
Current Consumption
Humidity
Dimensions
Weight
Reliability
Safety
UL
Z9-IO-PE-ZE
IOEX-4440; 4422;4404
Operating
Temperature
Channel Spacing
RF Data Rater
IF Selectivity
System Gain
Type
Modulation
Link Throughput
Error Detection
Hopping Rates
Hopping Channels*
Hopping Patterns
Protocol
User Interface Rates
Data Encryption
Advanced Features
CPU
RAM
Storage
OS
Sensitivity RF Data Rates Without FEC With FEC
902 to 928 MHz HTTP, SSH
SNMPv1/v2c/v3, MIB-II, Enterprise MIB,
Modbus
802.1Q
Netmask filter, ARP filter
Four RJ-45 (2 Ethernet, 2 Serial)
TNC
Phoenix Contract (#1776692)
+6 to +30 VDC
12 VDC 377 mA 159 mA 143 mA
Micro USB
Type A (Future Expansion)
TCP server, Modbus/TCP, Modbus RTU,
TCP client
10 mW to 1 W: user selectable
97 km (60 miles) with clear line of sight
Frequency Hopping Spread Spectrum
Up to 1.6 Mbps; 4 Mbps with Compression
ARQ and CRC, retransmit on error, FEC
400, 200, 100, 50, 25 ms
Up to 110; RF Data Rate Dependent
Up to 16; RF Data Rate Dependent
Adaptive Spectrum Learning (ASL)
128-bit and 256-bit AES CCM
Packet Compression and Aggregation
ARM Cortex-A8 1 GHz
1 GB
1 GB
Debian-based Linux
> 40 dB
135 dB
115.2 kbps -105 dBm -108 dBm
250 kbps -102 dBm -105 dBm
500 kbps -99 dBm -102 dBm
1 Mbps -95 dBm -98 dBm
1.5 Mbps (Beta) -90 dBm -93 dBm
4 Mbps -83 dBm -86 dBm
230.4, 345.6, 691.2, 1382.4, 1612.8 (Beta), &
3225.6 kHz
115.2, 250, 500 kbps, 1, 1.5 (Beta), &4 Mbps;
user selectable
2 level GFSK
4- and 8-ary FSK
Ethernet Rate; 10/100 Mbps
Serial Rate; up to 250 kbps

29. Click “Exit” to close the conguration window.
30. Our system is now congured for our analog Tank Level sensor! This conguration will remain until
changed by a user, even through power cycles.
28. Notice that the values in the “Readings” columns have changed. When congured, they “read” the
registers for this input and are displaying the initial readings. Since this is just a oating line, the values will
be a low number. If we had a true sensor on this line, the values would read the value of the input from the
analog sensor. To refresh these readings regularly, turn on the “Refresh Data Readings” switch above the
channel list on the main page.
Data Connectors Four RJ-45 (2 Ethernet, 2 Serial)
USB Connectors Micro USB
Type A (Future Expansion)
RF Connector TNC
Power Connectors Phoenix Contact (#1776692)
Interfaces
Frequency Range* 902 to 928 MHz
Output Power* 10 mW to 1 W; user selectable
Range 97 km (60 miles) with clear line of sight
Channel Spacing 230.4, 345.6, 691.2, 1382.4, 1612.8 (Beta), &
3225.6 kHz
RF Data Rate 115.2, 250, 500 kbps, 1, 1.5 (Beta), & 4 Mbps;
user selectable
Transmitter
Type Frequency Hopping Spread Spectrum
Modulation 2 level GFSK
4- and 8-ary FSK
Link Throughput Up to 1.6 Mbps; 4 Mbps with Compression
Error Detection ARQ and CRC, retransmit on error, FEC
Hopping Rates 400, 200, 100, 50, 25 ms
Hopping Channels* Up to 110; RF Data Rate Dependent
Hopping Patterns Up to 16; RF Data Rate Dependent
Protocol Adaptive Spectrum Learning (ASL)
User Interface Rates Ethernet Rate: 10/100 Mbps
Serial Rate: up to 250 kbps
Data Encryption 128-bit and 256-bit AES CCM
Advanced Features Packet Compression and Aggregation
Data Transmission
CPU ARM Cortex-A8 1 GHz
RAM 1 GB
Storage 1 GB
OS Debian-based Linux
Computing Resources (OPTIONAL UPGRADE)**
Contact FreeWave Sales for information.
**Requires licensing. Contact FreeWave Sales for information.
|ZumLink™ 900 Series
5395 Pearl Parkway
Boulder, CO 80301
Copyright © 2019 FreeWave Technologies, Inc. All rights reserved.
LDS0010AA
TF: 1.866.923.6168
Tel: [phone]
www.freewave.com
Management HTTP, SSH
SNMPv1/v2c/v3, MIB-II, Enterprise MIB,
Modbus
Management
VLAN 802.1Q
Serial TCP server, Modbus/TCP, Modbus RTU,
TCP client
Networking
Operating Voltage +6 to +30 VDC
Current Consumption
Voltage Transmit Receive Idle
12 VDC 377 mA 159 mA 143 mA
Power Requirements
Operating
Temperature
Z9-P2: -40ºC to +85ºC (-40°F to +185°F)
Z9-PE2: -40ºC to +75ºC (-40ºF to +167ºF)
Humidity 0 to 95% non-condensing
Dimensions Z9-P2:
170.18 L x 86.6 W x 27.18 H (mm)
6.70 L x 3.41 W x 1.07 H (in)
Z9-PE2:
191.00 L x 104.39 W x 41.91 H (mm)
7.52 L x 4.11 W x 1.65 H (in)
Weight Z9-P2: 200.5 g (0.44 lbs)
Z9-PE2: 750 g (1.7 lbs)
Reliability MTBF 206,186
Safety Class I, Division 2, Groups A-D
UL Z9-P2: Z9-PE2:
General Information
Information to Order
Model Number
Z9-P2 Board Level Unit, 902 to 928 MHz
Z9-PE2 Enclosed Unit, 902 to 928 MHz
Receiver
IF Selectivity > 40 dB
System Gain 135 dB
Sensitivity
RF Data Rates Without FEC With FEC
115.2 kbps -105 dBm -108 dBm
250 kbps -102 dBm -105 dBm
500 kbps -99 dBm -102 dBm
1 Mbps -95 dBm -98 dBm
1.5 Mbps (Beta) -90 dBm -93 dBm
4 Mbps -83 dBm -86 dBm
ZumEdge TM
Transmitter Management
Networking
Interfaces
Power Requirements
General Information
Information to Order
Model Number
Receiver
Data Transmission
Computing Resources (OPTIONAL UPGRADE)**
+6 to +30 VDC
0 to 95% non-condensing
165.28 L x 76.89W x 27.55 (mm))
6.51 L x 3.03 W x 1.08 H (Inches)
ZumEdge
IO Expansion
0.5lbs/250C
MTBF 206,186
Class I, Division 2, Groups A-D
Frequency Range*
Output Power*
Range
Management
VLAN
Serial
Traffic Filtering
Data Connectors
USB Connectors
RF Connector
Power Connectors
Operating Voltage
Voltage Transmit Receive Idle
Current Consumption
Humidity
Dimensions
Weight
Reliability
Safety
UL
Z9-IO-PE-ZE
IOEX-4440; 4422;4404
Operating
Temperature
Channel Spacing
RF Data Rater
IF Selectivity
System Gain
Type
Modulation
Link Throughput
Error Detection
Hopping Rates
Hopping Channels*
Hopping Patterns
Protocol
User Interface Rates
Data Encryption
Advanced Features
CPU
RAM
Storage
OS
Sensitivity RF Data Rates Without FEC With FEC
902 to 928 MHz HTTP, SSH
SNMPv1/v2c/v3, MIB-II, Enterprise MIB,
Modbus
802.1Q
Netmask filter, ARP filter
Four RJ-45 (2 Ethernet, 2 Serial)
TNC
Phoenix Contract (#1776692)
+6 to +30 VDC
12 VDC 377 mA 159 mA 143 mA
Micro USB
Type A (Future Expansion)
TCP server, Modbus/TCP, Modbus RTU,
TCP client
10 mW to 1 W: user selectable
97 km (60 miles) with clear line of sight
Frequency Hopping Spread Spectrum
Up to 1.6 Mbps; 4 Mbps with Compression
ARQ and CRC, retransmit on error, FEC
400, 200, 100, 50, 25 ms
Up to 110; RF Data Rate Dependent
Up to 16; RF Data Rate Dependent
Adaptive Spectrum Learning (ASL)
128-bit and 256-bit AES CCM
Packet Compression and Aggregation
ARM Cortex-A8 1 GHz
1 GB
1 GB
Debian-based Linux
> 40 dB
135 dB
115.2 kbps -105 dBm -108 dBm
250 kbps -102 dBm -105 dBm
500 kbps -99 dBm -102 dBm
1 Mbps -95 dBm -98 dBm
1.5 Mbps (Beta) -90 dBm -93 dBm
4 Mbps -83 dBm -86 dBm
230.4, 345.6, 691.2, 1382.4, 1612.8 (Beta), &
3225.6 kHz
115.2, 250, 500 kbps, 1, 1.5 (Beta), &4 Mbps;
user selectable
2 level GFSK
4- and 8-ary FSK
Ethernet Rate; 10/100 Mbps
Serial Rate; up to 250 kbps

31. Now that our system is congured, it becomes
part of the network at this IP address, and can
be controlled, read, and recongured through the
ZumEdge REST API functionality. To see the library
of available API calls, click the “For developers” link
at the bottom of the screen.
32. This module is also now a part of the Modbus
TCP network. The Modbus settings are located on
the left side of the screen. To see a listing of Modbus
registers, click the link for the model number of IOEX
module you have (IOEX-4422 for this alpha guide).
From here you can begin write your
user application to transform and
process data and make decisions on
the ZumEdge device itself!
33. Along with the standard Modbus controls and new REST API controls, the ZumEdge comes standard
with an Application Development environment where users and system integrators can write custom
applications on the ZumEdge device. To start using the application development space, simply open a
command prompt in Windows (press WIN+x, then c), and ssh into the ZumEdge with the command
ssh [email protected]
The default password is “devuser”.
Controlling The System
Data Connectors Four RJ-45 (2 Ethernet, 2 Serial)
USB Connectors Micro USB
Type A (Future Expansion)
RF Connector TNC
Power Connectors Phoenix Contact (#1776692)
Interfaces
Frequency Range* 902 to 928 MHz
Output Power* 10 mW to 1 W; user selectable
Range 97 km (60 miles) with clear line of sight
Channel Spacing 230.4, 345.6, 691.2, 1382.4, 1612.8 (Beta), &
3225.6 kHz
RF Data Rate 115.2, 250, 500 kbps, 1, 1.5 (Beta), & 4 Mbps;
user selectable
Transmitter
Type Frequency Hopping Spread Spectrum
Modulation 2 level GFSK
4- and 8-ary FSK
Link Throughput Up to 1.6 Mbps; 4 Mbps with Compression
Error Detection ARQ and CRC, retransmit on error, FEC
Hopping Rates 400, 200, 100, 50, 25 ms
Hopping Channels* Up to 110; RF Data Rate Dependent
Hopping Patterns Up to 16; RF Data Rate Dependent
Protocol Adaptive Spectrum Learning (ASL)
User Interface Rates Ethernet Rate: 10/100 Mbps
Serial Rate: up to 250 kbps
Data Encryption 128-bit and 256-bit AES CCM
Advanced Features Packet Compression and Aggregation
Data Transmission
CPU ARM Cortex-A8 1 GHz
RAM 1 GB
Storage 1 GB
OS Debian-based Linux
Computing Resources (OPTIONAL UPGRADE)**
Contact FreeWave Sales for information.
**Requires licensing. Contact FreeWave Sales for information.
|ZumLink™ 900 Series
5395 Pearl Parkway
Boulder, CO 80301
Copyright © 2019 FreeWave Technologies, Inc. All rights reserved.
LDS0010AA
TF: 1.866.923.6168
Tel: [phone]
www.freewave.com
Management HTTP, SSH
SNMPv1/v2c/v3, MIB-II, Enterprise MIB,
Modbus
Management
VLAN 802.1Q
Serial TCP server, Modbus/TCP, Modbus RTU,
TCP client
Networking
Operating Voltage +6 to +30 VDC
Current Consumption
Voltage Transmit Receive Idle
12 VDC 377 mA 159 mA 143 mA
Power Requirements
Operating
Temperature
Z9-P2: -40ºC to +85ºC (-40°F to +185°F)
Z9-PE2: -40ºC to +75ºC (-40ºF to +167ºF)
Humidity 0 to 95% non-condensing
Dimensions Z9-P2:
170.18 L x 86.6 W x 27.18 H (mm)
6.70 L x 3.41 W x 1.07 H (in)
Z9-PE2:
191.00 L x 104.39 W x 41.91 H (mm)
7.52 L x 4.11 W x 1.65 H (in)
Weight Z9-P2: 200.5 g (0.44 lbs)
Z9-PE2: 750 g (1.7 lbs)
Reliability MTBF 206,186
Safety Class I, Division 2, Groups A-D
UL Z9-P2: Z9-PE2:
General Information
Information to Order
Model Number
Z9-P2 Board Level Unit, 902 to 928 MHz
Z9-PE2 Enclosed Unit, 902 to 928 MHz
Receiver
IF Selectivity > 40 dB
System Gain 135 dB
Sensitivity
RF Data Rates Without FEC With FEC
115.2 kbps -105 dBm -108 dBm
250 kbps -102 dBm -105 dBm
500 kbps -99 dBm -102 dBm
1 Mbps -95 dBm -98 dBm
1.5 Mbps (Beta) -90 dBm -93 dBm
4 Mbps -83 dBm -86 dBm
ZumEdge TM
Transmitter Management
Networking
Interfaces
Power Requirements
General Information
Information to Order
Model Number
Receiver
Data Transmission
Computing Resources (OPTIONAL UPGRADE)**
+6 to +30 VDC
0 to 95% non-condensing
165.28 L x 76.89W x 27.55 (mm))
6.51 L x 3.03 W x 1.08 H (Inches)
ZumEdge
IO Expansion
0.5lbs/250C
MTBF 206,186
Class I, Division 2, Groups A-D
Frequency Range*
Output Power*
Range
Management
VLAN
Serial
Traffic Filtering
Data Connectors
USB Connectors
RF Connector
Power Connectors
Operating Voltage
Voltage Transmit Receive Idle
Current Consumption
Humidity
Dimensions
Weight
Reliability
Safety
UL
Z9-IO-PE-ZE
IOEX-4440; 4422;4404
Operating
Temperature
Channel Spacing
RF Data Rater
IF Selectivity
System Gain
Type
Modulation
Link Throughput
Error Detection
Hopping Rates
Hopping Channels*
Hopping Patterns
Protocol
User Interface Rates
Data Encryption
Advanced Features
CPU
RAM
Storage
OS
Sensitivity RF Data Rates Without FEC With FEC
902 to 928 MHz HTTP, SSH
SNMPv1/v2c/v3, MIB-II, Enterprise MIB,
Modbus
802.1Q
Netmask filter, ARP filter
Four RJ-45 (2 Ethernet, 2 Serial)
TNC
Phoenix Contract (#1776692)
+6 to +30 VDC
12 VDC 377 mA 159 mA 143 mA
Micro USB
Type A (Future Expansion)
TCP server, Modbus/TCP, Modbus RTU,
TCP client
10 mW to 1 W: user selectable
97 km (60 miles) with clear line of sight
Frequency Hopping Spread Spectrum
Up to 1.6 Mbps; 4 Mbps with Compression
ARQ and CRC, retransmit on error, FEC
400, 200, 100, 50, 25 ms
Up to 110; RF Data Rate Dependent
Up to 16; RF Data Rate Dependent
Adaptive Spectrum Learning (ASL)
128-bit and 256-bit AES CCM
Packet Compression and Aggregation
ARM Cortex-A8 1 GHz
1 GB
1 GB
Debian-based Linux
> 40 dB
135 dB
115.2 kbps -105 dBm -108 dBm
250 kbps -102 dBm -105 dBm
500 kbps -99 dBm -102 dBm
1 Mbps -95 dBm -98 dBm
1.5 Mbps (Beta) -90 dBm -93 dBm
4 Mbps -83 dBm -86 dBm
230.4, 345.6, 691.2, 1382.4, 1612.8 (Beta), &
3225.6 kHz
115.2, 250, 500 kbps, 1, 1.5 (Beta), &4 Mbps;
user selectable
2 level GFSK
4- and 8-ary FSK
Ethernet Rate; 10/100 Mbps
Serial Rate; up to 250 kbps

TM
Z9-IO-PE-ZE
IOEX-4440;
4422; 4404
User Manual
Operation is subject to the following two conditions: (1) this device may not cause harmful interference,
and (2) this device must accept any interference received, including interference that may cause undesired
operation.
The content of this guide covers FreeWave Technologies, Inc. models sold under FCC ID: KNYPMT0101AB.
All models sold under the listed FCC ID(s) must be installed professionally and are only approved for use
when installed in devices produced by FreeWave Technologies or third party OEMs with the express
written approval of FreeWave Technologies, Inc. Changes or modications should not be made to the
device.
Changes or modications not expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
FCC Notications
FCC Supplier’s Declaration of Conformity
FreeWave Technologies, Inc.
5395 Pearl Parkway, Boulder, CO 80301
Phone Number: 303.381.9200
Website: www.freewave.com
FreeWave Technologies declare under our sole responsibility that the product Models:
Z9-IO-PE-ZE complies with Part 15 of FCC Rules.
Data Connectors Four RJ-45 (2 Ethernet, 2 Serial)
USB Connectors Micro USB
Type A (Future Expansion)
RF Connector TNC
Power Connectors Phoenix Contact (#1776692)
Interfaces
Frequency Range* 902 to 928 MHz
Output Power* 10 mW to 1 W; user selectable
Range 97 km (60 miles) with clear line of sight
Channel Spacing 230.4, 345.6, 691.2, 1382.4, 1612.8 (Beta), &
3225.6 kHz
RF Data Rate 115.2, 250, 500 kbps, 1, 1.5 (Beta), & 4 Mbps;
user selectable
Transmitter
Type Frequency Hopping Spread Spectrum
Modulation 2 level GFSK
4- and 8-ary FSK
Link Throughput Up to 1.6 Mbps; 4 Mbps with Compression
Error Detection ARQ and CRC, retransmit on error, FEC
Hopping Rates 400, 200, 100, 50, 25 ms
Hopping Channels* Up to 110; RF Data Rate Dependent
Hopping Patterns Up to 16; RF Data Rate Dependent
Protocol Adaptive Spectrum Learning (ASL)
User Interface Rates Ethernet Rate: 10/100 Mbps
Serial Rate: up to 250 kbps
Data Encryption 128-bit and 256-bit AES CCM
Advanced Features Packet Compression and Aggregation
Data Transmission
CPU ARM Cortex-A8 1 GHz
RAM 1 GB
Storage 1 GB
OS Debian-based Linux
Computing Resources (OPTIONAL UPGRADE)**
Contact FreeWave Sales for information.
**Requires licensing. Contact FreeWave Sales for information.
|ZumLink™ 900 Series
5395 Pearl Parkway
Boulder, CO 80301
Copyright © 2019 FreeWave Technologies, Inc. All rights reserved.
LDS0010AA
TF: 1.866.923.6168
Tel: [phone]
www.freewave.com
Management HTTP, SSH
SNMPv1/v2c/v3, MIB-II, Enterprise MIB,
Modbus
Management
VLAN 802.1Q
Serial TCP server, Modbus/TCP, Modbus RTU,
TCP client
Networking
Operating Voltage +6 to +30 VDC
Current Consumption
Voltage Transmit Receive Idle
12 VDC 377 mA 159 mA 143 mA
Power Requirements
Operating
Temperature
Z9-P2: -40ºC to +85ºC (-40°F to +185°F)
Z9-PE2: -40ºC to +75ºC (-40ºF to +167ºF)
Humidity 0 to 95% non-condensing
Dimensions Z9-P2:
170.18 L x 86.6 W x 27.18 H (mm)
6.70 L x 3.41 W x 1.07 H (in)
Z9-PE2:
191.00 L x 104.39 W x 41.91 H (mm)
7.52 L x 4.11 W x 1.65 H (in)
Weight Z9-P2: 200.5 g (0.44 lbs)
Z9-PE2: 750 g (1.7 lbs)
Reliability MTBF 206,186
Safety Class I, Division 2, Groups A-D
UL Z9-P2: Z9-PE2:
General Information
Information to Order
Model Number
Z9-P2 Board Level Unit, 902 to 928 MHz
Z9-PE2 Enclosed Unit, 902 to 928 MHz
Receiver
IF Selectivity > 40 dB
System Gain 135 dB
Sensitivity
RF Data Rates Without FEC With FEC
115.2 kbps -105 dBm -108 dBm
250 kbps -102 dBm -105 dBm
500 kbps -99 dBm -102 dBm
1 Mbps -95 dBm -98 dBm
1.5 Mbps (Beta) -90 dBm -93 dBm
4 Mbps -83 dBm -86 dBm
ZumEdge TM
Transmitter Management
Networking
Interfaces
Power Requirements
General Information
Information to Order
Model Number
Receiver
Data Transmission
Computing Resources (OPTIONAL UPGRADE)**
+6 to +30 VDC
0 to 95% non-condensing
165.28 L x 76.89W x 27.55 (mm))
6.51 L x 3.03 W x 1.08 H (Inches)
ZumEdge
IO Expansion
0.5lbs/250C
MTBF 206,186
Class I, Division 2, Groups A-D
Frequency Range*
Output Power*
Range
Management
VLAN
Serial
Traffic Filtering
Data Connectors
USB Connectors
RF Connector
Power Connectors
Operating Voltage
Voltage Transmit Receive Idle
Current Consumption
Humidity
Dimensions
Weight
Reliability
Safety
UL
Z9-IO-PE-ZE
IOEX-4440; 4422;4404
Operating
Temperature
Channel Spacing
RF Data Rater
IF Selectivity
System Gain
Type
Modulation
Link Throughput
Error Detection
Hopping Rates
Hopping Channels*
Hopping Patterns
Protocol
User Interface Rates
Data Encryption
Advanced Features
CPU
RAM
Storage
OS
Sensitivity RF Data Rates Without FEC With FEC
902 to 928 MHz HTTP, SSH
SNMPv1/v2c/v3, MIB-II, Enterprise MIB,
Modbus
802.1Q
Netmask filter, ARP filter
Four RJ-45 (2 Ethernet, 2 Serial)
TNC
Phoenix Contract (#1776692)
+6 to +30 VDC
12 VDC 377 mA 159 mA 143 mA
Micro USB
Type A (Future Expansion)
TCP server, Modbus/TCP, Modbus RTU,
TCP client
10 mW to 1 W: user selectable
97 km (60 miles) with clear line of sight
Frequency Hopping Spread Spectrum
Up to 1.6 Mbps; 4 Mbps with Compression
ARQ and CRC, retransmit on error, FEC
400, 200, 100, 50, 25 ms
Up to 110; RF Data Rate Dependent
Up to 16; RF Data Rate Dependent
Adaptive Spectrum Learning (ASL)
128-bit and 256-bit AES CCM
Packet Compression and Aggregation
ARM Cortex-A8 1 GHz
1 GB
1 GB
Debian-based Linux
> 40 dB
135 dB
115.2 kbps -105 dBm -108 dBm
250 kbps -102 dBm -105 dBm
500 kbps -99 dBm -102 dBm
1 Mbps -95 dBm -98 dBm
1.5 Mbps (Beta) -90 dBm -93 dBm
4 Mbps -83 dBm -86 dBm
230.4, 345.6, 691.2, 1382.4, 1612.8 (Beta), &
3225.6 kHz
115.2, 250, 500 kbps, 1, 1.5 (Beta), &4 Mbps;
user selectable
2 level GFSK
4- and 8-ary FSK
Ethernet Rate; 10/100 Mbps
Serial Rate; up to 250 kbps

FCC Part 15 Class A
Note: This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance
with the User-Reference Manual, may cause harmful interference to radio communications. Operation of
this equipment in a residential area is likely to cause harmful interference in which case the user will be
required to correct the interference at their own expense.
FCC NEMA Installation and Label
Where applicable, the models described in this guide must be installed in a NEMA enclosure. When any
FreeWave Technologies, Inc. module is placed inside an enclosure, a label must be placed on the outside of
the enclosure. The label must include the text: “Contains FCC ID: KNYPMT0101AB.”
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This
equipment should be installed and operated with minimum distance 22.94 cm between the radiator and
your body.
FCC Notication of Power Warning
The ZumEdge Z9-IO-PE-ZE covered in this document has a maximum transmitted output power of
+30dBm. The antennas used MUST provide a separation distance of at least 22.94 cm from all persons
and MUST NOT be co-located or operate in conjunction with any other antenna or transmitter.
Argentina CNC
Identicación CNC
Z9-IO-PE-ZE Contiene CNC ID: C-21612
ISED Notications
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the
following two conditions: (1) this device may not cause interference, and (2) this device must accept any
interference, including interference that may cause undesired operation of the device.
CAN ICES-3 (A)/NMB-3(A)
Ce dispositif est conforme aux normes permis-exemptes du Canada RSS d’industrie. L’opération est sujette
aux deux conditions suivantes: (1) ce dispositif peut ne pas causer l’interférence, et (2) ce dispositif doit
accepter n’importe quelle interférence, y compris l’interférence qui peut causer le fonctionnement peu
désiré du dispositif. CAN ICES-3 (A)/NMB-3(A)
Data Connectors Four RJ-45 (2 Ethernet, 2 Serial)
USB Connectors Micro USB
Type A (Future Expansion)
RF Connector TNC
Power Connectors Phoenix Contact (#1776692)
Interfaces
Frequency Range* 902 to 928 MHz
Output Power* 10 mW to 1 W; user selectable
Range 97 km (60 miles) with clear line of sight
Channel Spacing 230.4, 345.6, 691.2, 1382.4, 1612.8 (Beta), &
3225.6 kHz
RF Data Rate 115.2, 250, 500 kbps, 1, 1.5 (Beta), & 4 Mbps;
user selectable
Transmitter
Type Frequency Hopping Spread Spectrum
Modulation 2 level GFSK
4- and 8-ary FSK
Link Throughput Up to 1.6 Mbps; 4 Mbps with Compression
Error Detection ARQ and CRC, retransmit on error, FEC
Hopping Rates 400, 200, 100, 50, 25 ms
Hopping Channels* Up to 110; RF Data Rate Dependent
Hopping Patterns Up to 16; RF Data Rate Dependent
Protocol Adaptive Spectrum Learning (ASL)
User Interface Rates Ethernet Rate: 10/100 Mbps
Serial Rate: up to 250 kbps
Data Encryption 128-bit and 256-bit AES CCM
Advanced Features Packet Compression and Aggregation
Data Transmission
CPU ARM Cortex-A8 1 GHz
RAM 1 GB
Storage 1 GB
OS Debian-based Linux
Computing Resources (OPTIONAL UPGRADE)**
Contact FreeWave Sales for information.
**Requires licensing. Contact FreeWave Sales for information.
|ZumLink™ 900 Series
5395 Pearl Parkway
Boulder, CO 80301
Copyright © 2019 FreeWave Technologies, Inc. All rights reserved.
LDS0010AA
TF: 1.866.923.6168
Tel: [phone]
www.freewave.com
Management HTTP, SSH
SNMPv1/v2c/v3, MIB-II, Enterprise MIB,
Modbus
Management
VLAN 802.1Q
Serial TCP server, Modbus/TCP, Modbus RTU,
TCP client
Networking
Operating Voltage +6 to +30 VDC
Current Consumption
Voltage Transmit Receive Idle
12 VDC 377 mA 159 mA 143 mA
Power Requirements
Operating
Temperature
Z9-P2: -40ºC to +85ºC (-40°F to +185°F)
Z9-PE2: -40ºC to +75ºC (-40ºF to +167ºF)
Humidity 0 to 95% non-condensing
Dimensions Z9-P2:
170.18 L x 86.6 W x 27.18 H (mm)
6.70 L x 3.41 W x 1.07 H (in)
Z9-PE2:
191.00 L x 104.39 W x 41.91 H (mm)
7.52 L x 4.11 W x 1.65 H (in)
Weight Z9-P2: 200.5 g (0.44 lbs)
Z9-PE2: 750 g (1.7 lbs)
Reliability MTBF 206,186
Safety Class I, Division 2, Groups A-D
UL Z9-P2: Z9-PE2:
General Information
Information to Order
Model Number
Z9-P2 Board Level Unit, 902 to 928 MHz
Z9-PE2 Enclosed Unit, 902 to 928 MHz
Receiver
IF Selectivity > 40 dB
System Gain 135 dB
Sensitivity
RF Data Rates Without FEC With FEC
115.2 kbps -105 dBm -108 dBm
250 kbps -102 dBm -105 dBm
500 kbps -99 dBm -102 dBm
1 Mbps -95 dBm -98 dBm
1.5 Mbps (Beta) -90 dBm -93 dBm
4 Mbps -83 dBm -86 dBm
ZumEdge TM
Transmitter Management
Networking
Interfaces
Power Requirements
General Information
Information to Order
Model Number
Receiver
Data Transmission
Computing Resources (OPTIONAL UPGRADE)**
+6 to +30 VDC
0 to 95% non-condensing
165.28 L x 76.89W x 27.55 (mm))
6.51 L x 3.03 W x 1.08 H (Inches)
ZumEdge
IO Expansion
0.5lbs/250C
MTBF 206,186
Class I, Division 2, Groups A-D
Frequency Range*
Output Power*
Range
Management
VLAN
Serial
Traffic Filtering
Data Connectors
USB Connectors
RF Connector
Power Connectors
Operating Voltage
Voltage Transmit Receive Idle
Current Consumption
Humidity
Dimensions
Weight
Reliability
Safety
UL
Z9-IO-PE-ZE
IOEX-4440; 4422;4404
Operating
Temperature
Channel Spacing
RF Data Rater
IF Selectivity
System Gain
Type
Modulation
Link Throughput
Error Detection
Hopping Rates
Hopping Channels*
Hopping Patterns
Protocol
User Interface Rates
Data Encryption
Advanced Features
CPU
RAM
Storage
OS
Sensitivity RF Data Rates Without FEC With FEC
902 to 928 MHz HTTP, SSH
SNMPv1/v2c/v3, MIB-II, Enterprise MIB,
Modbus
802.1Q
Netmask filter, ARP filter
Four RJ-45 (2 Ethernet, 2 Serial)
TNC
Phoenix Contract (#1776692)
+6 to +30 VDC
12 VDC 377 mA 159 mA 143 mA
Micro USB
Type A (Future Expansion)
TCP server, Modbus/TCP, Modbus RTU,
TCP client
10 mW to 1 W: user selectable
97 km (60 miles) with clear line of sight
Frequency Hopping Spread Spectrum
Up to 1.6 Mbps; 4 Mbps with Compression
ARQ and CRC, retransmit on error, FEC
400, 200, 100, 50, 25 ms
Up to 110; RF Data Rate Dependent
Up to 16; RF Data Rate Dependent
Adaptive Spectrum Learning (ASL)
128-bit and 256-bit AES CCM
Packet Compression and Aggregation
ARM Cortex-A8 1 GHz
1 GB
1 GB
Debian-based Linux
> 40 dB
135 dB
115.2 kbps -105 dBm -108 dBm
250 kbps -102 dBm -105 dBm
500 kbps -99 dBm -102 dBm
1 Mbps -95 dBm -98 dBm
1.5 Mbps (Beta) -90 dBm -93 dBm
4 Mbps -83 dBm -86 dBm
230.4, 345.6, 691.2, 1382.4, 1612.8 (Beta), &
3225.6 kHz
115.2, 250, 500 kbps, 1, 1.5 (Beta), &4 Mbps;
user selectable
2 level GFSK
4- and 8-ary FSK
Ethernet Rate; 10/100 Mbps
Serial Rate; up to 250 kbps

ISED Host Installation and Label
The content of this documentation covers FreeWave Technologies, Inc. models sold under IC:
2329B-PMT0101AB. When any FreeWave Technologies, Inc. module is placed inside a Host, a label must
be placed on the outside of the Host. The label must include the text “Contains IC: 2329B-PMT0101AB”.
Professional Installation
All models sold under the listed IC ID must be professionally installed.
ISED Radiation Exposure Statement
This system has been evaluated for RF Exposure per RSS-102 and is in compliance with the limits
specied by Health Canada Safety Code 6. The system must be installed at a minimum separation
distance from the antenna to a general bystander of 20.5 inches (52cm) to maintain compliance with the
General Population limits.
L’exposition aux radiofréquences de ce système a été évaluée selon la norme RSS-102 et est jugée conforme
aux limites établies par le Code de sécurité 6 de Santé Canada. Le système doit être installé à une distance
minimale de 20.5 pouces (52cm) séparant l’antenne d’une personne présente en conformité avec les limites
permises d’exposition du grand public.
Only FCC and IC approved antennas may be used.
The antenna must be professionally installed on a xed, mounted, and permanent outdoor structure to
satisfy RF exposure requirements.
Any antenna placed outdoors must be properly grounded.
Use extreme caution when installing antennas and follow all instructions included with the antenna.
Approved Antennas
Yagi Directional Antennas
The 900 MHz is approved by the FCC for use with directional antennas with a dBi gain or less
900 MHz Yagi Directional Antennas
Data Connectors Four RJ-45 (2 Ethernet, 2 Serial)
USB Connectors Micro USB
Type A (Future Expansion)
RF Connector TNC
Power Connectors Phoenix Contact (#1776692)
Interfaces
Frequency Range* 902 to 928 MHz
Output Power* 10 mW to 1 W; user selectable
Range 97 km (60 miles) with clear line of sight
Channel Spacing 230.4, 345.6, 691.2, 1382.4, 1612.8 (Beta), &
3225.6 kHz
RF Data Rate 115.2, 250, 500 kbps, 1, 1.5 (Beta), & 4 Mbps;
user selectable
Transmitter
Type Frequency Hopping Spread Spectrum
Modulation 2 level GFSK
4- and 8-ary FSK
Link Throughput Up to 1.6 Mbps; 4 Mbps with Compression
Error Detection ARQ and CRC, retransmit on error, FEC
Hopping Rates 400, 200, 100, 50, 25 ms
Hopping Channels* Up to 110; RF Data Rate Dependent
Hopping Patterns Up to 16; RF Data Rate Dependent
Protocol Adaptive Spectrum Learning (ASL)
User Interface Rates Ethernet Rate: 10/100 Mbps
Serial Rate: up to 250 kbps
Data Encryption 128-bit and 256-bit AES CCM
Advanced Features Packet Compression and Aggregation
Data Transmission
CPU ARM Cortex-A8 1 GHz
RAM 1 GB
Storage 1 GB
OS Debian-based Linux
Computing Resources (OPTIONAL UPGRADE)**
Contact FreeWave Sales for information.
**Requires licensing. Contact FreeWave Sales for information.
|ZumLink™ 900 Series
5395 Pearl Parkway
Boulder, CO 80301
Copyright © 2019 FreeWave Technologies, Inc. All rights reserved.
LDS0010AA
TF: 1.866.923.6168
Tel: [phone]
www.freewave.com
Management HTTP, SSH
SNMPv1/v2c/v3, MIB-II, Enterprise MIB,
Modbus
Management
VLAN 802.1Q
Serial TCP server, Modbus/TCP, Modbus RTU,
TCP client
Networking
Operating Voltage +6 to +30 VDC
Current Consumption
Voltage Transmit Receive Idle
12 VDC 377 mA 159 mA 143 mA
Power Requirements
Operating
Temperature
Z9-P2: -40ºC to +85ºC (-40°F to +185°F)
Z9-PE2: -40ºC to +75ºC (-40ºF to +167ºF)
Humidity 0 to 95% non-condensing
Dimensions Z9-P2:
170.18 L x 86.6 W x 27.18 H (mm)
6.70 L x 3.41 W x 1.07 H (in)
Z9-PE2:
191.00 L x 104.39 W x 41.91 H (mm)
7.52 L x 4.11 W x 1.65 H (in)
Weight Z9-P2: 200.5 g (0.44 lbs)
Z9-PE2: 750 g (1.7 lbs)
Reliability MTBF 206,186
Safety Class I, Division 2, Groups A-D
UL Z9-P2: Z9-PE2:
General Information
Information to Order
Model Number
Z9-P2 Board Level Unit, 902 to 928 MHz
Z9-PE2 Enclosed Unit, 902 to 928 MHz
Receiver
IF Selectivity > 40 dB
System Gain 135 dB
Sensitivity
RF Data Rates Without FEC With FEC
115.2 kbps -105 dBm -108 dBm
250 kbps -102 dBm -105 dBm
500 kbps -99 dBm -102 dBm
1 Mbps -95 dBm -98 dBm
1.5 Mbps (Beta) -90 dBm -93 dBm
4 Mbps -83 dBm -86 dBm
ZumEdge TM
Transmitter Management
Networking
Interfaces
Power Requirements
General Information
Information to Order
Model Number
Receiver
Data Transmission
Computing Resources (OPTIONAL UPGRADE)**
+6 to +30 VDC
0 to 95% non-condensing
165.28 L x 76.89W x 27.55 (mm))
6.51 L x 3.03 W x 1.08 H (Inches)
ZumEdge
IO Expansion
0.5lbs/250C
MTBF 206,186
Class I, Division 2, Groups A-D
Frequency Range*
Output Power*
Range
Management
VLAN
Serial
Traffic Filtering
Data Connectors
USB Connectors
RF Connector
Power Connectors
Operating Voltage
Voltage Transmit Receive Idle
Current Consumption
Humidity
Dimensions
Weight
Reliability
Safety
UL
Z9-IO-PE-ZE
IOEX-4440; 4422;4404
Operating
Temperature
Channel Spacing
RF Data Rater
IF Selectivity
System Gain
Type
Modulation
Link Throughput
Error Detection
Hopping Rates
Hopping Channels*
Hopping Patterns
Protocol
User Interface Rates
Data Encryption
Advanced Features
CPU
RAM
Storage
OS
Sensitivity RF Data Rates Without FEC With FEC
902 to 928 MHz HTTP, SSH
SNMPv1/v2c/v3, MIB-II, Enterprise MIB,
Modbus
802.1Q
Netmask filter, ARP filter
Four RJ-45 (2 Ethernet, 2 Serial)
TNC
Phoenix Contract (#1776692)
+6 to +30 VDC
12 VDC 377 mA 159 mA 143 mA
Micro USB
Type A (Future Expansion)
TCP server, Modbus/TCP, Modbus RTU,
TCP client
10 mW to 1 W: user selectable
97 km (60 miles) with clear line of sight
Frequency Hopping Spread Spectrum
Up to 1.6 Mbps; 4 Mbps with Compression
ARQ and CRC, retransmit on error, FEC
400, 200, 100, 50, 25 ms
Up to 110; RF Data Rate Dependent
Up to 16; RF Data Rate Dependent
Adaptive Spectrum Learning (ASL)
128-bit and 256-bit AES CCM
Packet Compression and Aggregation
ARM Cortex-A8 1 GHz
1 GB
1 GB
Debian-based Linux
> 40 dB
135 dB
115.2 kbps -105 dBm -108 dBm
250 kbps -102 dBm -105 dBm
500 kbps -99 dBm -102 dBm
1 Mbps -95 dBm -98 dBm
1.5 Mbps (Beta) -90 dBm -93 dBm
4 Mbps -83 dBm -86 dBm
230.4, 345.6, 691.2, 1382.4, 1612.8 (Beta), &
3225.6 kHz
115.2, 250, 500 kbps, 1, 1.5 (Beta), &4 Mbps;
user selectable
2 level GFSK
4- and 8-ary FSK
Ethernet Rate; 10/100 Mbps
Serial Rate; up to 250 kbps

Omni-directional Antennas
The 900 MHz is approved by the FCC for use with omni-directional antennas with a 10.5dBi gain or less.
Alternative Antennas
Antennas other than those listed in this section can potentially be used with the ZumEdge with provisions.
• The antennas must be of a similar type.
• The antenna gain CANNOT exceed 10.5dBi for Omni-directional.
• The antenna gain CANNOT exceed 16.0dBi for Directional antennas.
• The overall system EIRP does not exceed 36dBm.
Warning! A proper combination with the ZumEdge is required to ensure the system meets FCC
requirements.
900 MHz Omni-Directional Antennas
Data Connectors Four RJ-45 (2 Ethernet, 2 Serial)
USB Connectors Micro USB
Type A (Future Expansion)
RF Connector TNC
Power Connectors Phoenix Contact (#1776692)
Interfaces
Frequency Range* 902 to 928 MHz
Output Power* 10 mW to 1 W; user selectable
Range 97 km (60 miles) with clear line of sight
Channel Spacing 230.4, 345.6, 691.2, 1382.4, 1612.8 (Beta), &
3225.6 kHz
RF Data Rate 115.2, 250, 500 kbps, 1, 1.5 (Beta), & 4 Mbps;
user selectable
Transmitter
Type Frequency Hopping Spread Spectrum
Modulation 2 level GFSK
4- and 8-ary FSK
Link Throughput Up to 1.6 Mbps; 4 Mbps with Compression
Error Detection ARQ and CRC, retransmit on error, FEC
Hopping Rates 400, 200, 100, 50, 25 ms
Hopping Channels* Up to 110; RF Data Rate Dependent
Hopping Patterns Up to 16; RF Data Rate Dependent
Protocol Adaptive Spectrum Learning (ASL)
User Interface Rates Ethernet Rate: 10/100 Mbps
Serial Rate: up to 250 kbps
Data Encryption 128-bit and 256-bit AES CCM
Advanced Features Packet Compression and Aggregation
Data Transmission
CPU ARM Cortex-A8 1 GHz
RAM 1 GB
Storage 1 GB
OS Debian-based Linux
Computing Resources (OPTIONAL UPGRADE)**
Contact FreeWave Sales for information.
**Requires licensing. Contact FreeWave Sales for information.
|ZumLink™ 900 Series
5395 Pearl Parkway
Boulder, CO 80301
Copyright © 2019 FreeWave Technologies, Inc. All rights reserved.
LDS0010AA
TF: 1.866.923.6168
Tel: [phone]
www.freewave.com
Management HTTP, SSH
SNMPv1/v2c/v3, MIB-II, Enterprise MIB,
Modbus
Management
VLAN 802.1Q
Serial TCP server, Modbus/TCP, Modbus RTU,
TCP client
Networking
Operating Voltage +6 to +30 VDC
Current Consumption
Voltage Transmit Receive Idle
12 VDC 377 mA 159 mA 143 mA
Power Requirements
Operating
Temperature
Z9-P2: -40ºC to +85ºC (-40°F to +185°F)
Z9-PE2: -40ºC to +75ºC (-40ºF to +167ºF)
Humidity 0 to 95% non-condensing
Dimensions Z9-P2:
170.18 L x 86.6 W x 27.18 H (mm)
6.70 L x 3.41 W x 1.07 H (in)
Z9-PE2:
191.00 L x 104.39 W x 41.91 H (mm)
7.52 L x 4.11 W x 1.65 H (in)
Weight Z9-P2: 200.5 g (0.44 lbs)
Z9-PE2: 750 g (1.7 lbs)
Reliability MTBF 206,186
Safety Class I, Division 2, Groups A-D
UL Z9-P2: Z9-PE2:
General Information
Information to Order
Model Number
Z9-P2 Board Level Unit, 902 to 928 MHz
Z9-PE2 Enclosed Unit, 902 to 928 MHz
Receiver
IF Selectivity > 40 dB
System Gain 135 dB
Sensitivity
RF Data Rates Without FEC With FEC
115.2 kbps -105 dBm -108 dBm
250 kbps -102 dBm -105 dBm
500 kbps -99 dBm -102 dBm
1 Mbps -95 dBm -98 dBm
1.5 Mbps (Beta) -90 dBm -93 dBm
4 Mbps -83 dBm -86 dBm
ZumEdge TM
Transmitter Management
Networking
Interfaces
Power Requirements
General Information
Information to Order
Model Number
Receiver
Data Transmission
Computing Resources (OPTIONAL UPGRADE)**
+6 to +30 VDC
0 to 95% non-condensing
165.28 L x 76.89W x 27.55 (mm))
6.51 L x 3.03 W x 1.08 H (Inches)
ZumEdge
IO Expansion
0.5lbs/250C
MTBF 206,186
Class I, Division 2, Groups A-D
Frequency Range*
Output Power*
Range
Management
VLAN
Serial
Traffic Filtering
Data Connectors
USB Connectors
RF Connector
Power Connectors
Operating Voltage
Voltage Transmit Receive Idle
Current Consumption
Humidity
Dimensions
Weight
Reliability
Safety
UL
Z9-IO-PE-ZE
IOEX-4440; 4422;4404
Operating
Temperature
Channel Spacing
RF Data Rater
IF Selectivity
System Gain
Type
Modulation
Link Throughput
Error Detection
Hopping Rates
Hopping Channels*
Hopping Patterns
Protocol
User Interface Rates
Data Encryption
Advanced Features
CPU
RAM
Storage
OS
Sensitivity RF Data Rates Without FEC With FEC
902 to 928 MHz HTTP, SSH
SNMPv1/v2c/v3, MIB-II, Enterprise MIB,
Modbus
802.1Q
Netmask filter, ARP filter
Four RJ-45 (2 Ethernet, 2 Serial)
TNC
Phoenix Contract (#1776692)
+6 to +30 VDC
12 VDC 377 mA 159 mA 143 mA
Micro USB
Type A (Future Expansion)
TCP server, Modbus/TCP, Modbus RTU,
TCP client
10 mW to 1 W: user selectable
97 km (60 miles) with clear line of sight
Frequency Hopping Spread Spectrum
Up to 1.6 Mbps; 4 Mbps with Compression
ARQ and CRC, retransmit on error, FEC
400, 200, 100, 50, 25 ms
Up to 110; RF Data Rate Dependent
Up to 16; RF Data Rate Dependent
Adaptive Spectrum Learning (ASL)
128-bit and 256-bit AES CCM
Packet Compression and Aggregation
ARM Cortex-A8 1 GHz
1 GB
1 GB
Debian-based Linux
> 40 dB
135 dB
115.2 kbps -105 dBm -108 dBm
250 kbps -102 dBm -105 dBm
500 kbps -99 dBm -102 dBm
1 Mbps -95 dBm -98 dBm
1.5 Mbps (Beta) -90 dBm -93 dBm
4 Mbps -83 dBm -86 dBm
230.4, 345.6, 691.2, 1382.4, 1612.8 (Beta), &
3225.6 kHz
115.2, 250, 500 kbps, 1, 1.5 (Beta), &4 Mbps;
user selectable
2 level GFSK
4- and 8-ary FSK
Ethernet Rate; 10/100 Mbps
Serial Rate; up to 250 kbps

UL and Safety Notication
Z9-IO-PE-ZE a Listed component under UL File Numbers: e484141 and e327789.
Standards and Editions
HazLoc Standards
UL 121201-2019
CSA C22.2 No. 213-17
Nonincendive Electrical Equipment for Use in Class I and II, Division 2 and Class III, Division 1 and 2
Hazardous (Classied) Locations
Ordinary Location Standards
UL 60950, 2nd Edition
CAN / CSA-C22.2 No. 60950, 2nd Edition
IEC 60950, 2nd Edition
EN 60950, 2nd Edition
Power Source
Z9-IO-PE-ZE is intended to be operated from a Limited Power Source (LPS) or Class 2 power source in
accordance with IEC/EN/UL 60950-1 and CAN/CSA C22.2 No. 60950-1-07.
The Z9-IO-PE-ZE is approved to operate with an input voltage range of +7.5 to +30 VDC, 4A, Tmra of
60°C.
Hazardous Locations Installation Instructions
This equipment is suitable for use in Class I, Division 2, Groups A, B, C and D OR non-hazardous locations
only.
Open type device intended to be installed in a suitable enclosure that requires the use of a tool to access.
Ambient: -40°C to +60°C
Temperature Code: T5
Input voltage rating of +7.5 to +30 VDC, 4A
WARNING – EXPLOSION HAZARD. DO NOT CONNECT OR DISCONNECT WHEN ENERGIZED.
AVERTISSEMENT – RISQUE D’EXPLOSION. NE PAS BRANCHER NI DÉBRANCHER SOUS TENSION.
WARNING – EXTERNAL USE OF THE ANTENNA IS NOT PERMITTED. THE ANTENNA IS TO BE
TERMINATED AND MOUNTED INTERNAL TO THE FINAL INSTALLED ENCLOSURE
AVERTISSEMENT - L’UTILISATION EXTERNE DE L’ANTENNE N’EST PAS AUTORISÉE. L’ANTENNE DOIT
ÊTRE TERMINÉE ET MONTÉE À L’INTÉRIEUR DU BOÎTIER FINAL INSTALLÉ
Data Connectors Four RJ-45 (2 Ethernet, 2 Serial)
USB Connectors Micro USB
Type A (Future Expansion)
RF Connector TNC
Power Connectors Phoenix Contact (#1776692)
Interfaces
Frequency Range* 902 to 928 MHz
Output Power* 10 mW to 1 W; user selectable
Range 97 km (60 miles) with clear line of sight
Channel Spacing 230.4, 345.6, 691.2, 1382.4, 1612.8 (Beta), &
3225.6 kHz
RF Data Rate 115.2, 250, 500 kbps, 1, 1.5 (Beta), & 4 Mbps;
user selectable
Transmitter
Type Frequency Hopping Spread Spectrum
Modulation 2 level GFSK
4- and 8-ary FSK
Link Throughput Up to 1.6 Mbps; 4 Mbps with Compression
Error Detection ARQ and CRC, retransmit on error, FEC
Hopping Rates 400, 200, 100, 50, 25 ms
Hopping Channels* Up to 110; RF Data Rate Dependent
Hopping Patterns Up to 16; RF Data Rate Dependent
Protocol Adaptive Spectrum Learning (ASL)
User Interface Rates Ethernet Rate: 10/100 Mbps
Serial Rate: up to 250 kbps
Data Encryption 128-bit and 256-bit AES CCM
Advanced Features Packet Compression and Aggregation
Data Transmission
CPU ARM Cortex-A8 1 GHz
RAM 1 GB
Storage 1 GB
OS Debian-based Linux
Computing Resources (OPTIONAL UPGRADE)**
Contact FreeWave Sales for information.
**Requires licensing. Contact FreeWave Sales for information.
|ZumLink™ 900 Series
5395 Pearl Parkway
Boulder, CO 80301
Copyright © 2019 FreeWave Technologies, Inc. All rights reserved.
LDS0010AA
TF: 1.866.923.6168
Tel: [phone]
www.freewave.com
Management HTTP, SSH
SNMPv1/v2c/v3, MIB-II, Enterprise MIB,
Modbus
Management
VLAN 802.1Q
Serial TCP server, Modbus/TCP, Modbus RTU,
TCP client
Networking
Operating Voltage +6 to +30 VDC
Current Consumption
Voltage Transmit Receive Idle
12 VDC 377 mA 159 mA 143 mA
Power Requirements
Operating
Temperature
Z9-P2: -40ºC to +85ºC (-40°F to +185°F)
Z9-PE2: -40ºC to +75ºC (-40ºF to +167ºF)
Humidity 0 to 95% non-condensing
Dimensions Z9-P2:
170.18 L x 86.6 W x 27.18 H (mm)
6.70 L x 3.41 W x 1.07 H (in)
Z9-PE2:
191.00 L x 104.39 W x 41.91 H (mm)
7.52 L x 4.11 W x 1.65 H (in)
Weight Z9-P2: 200.5 g (0.44 lbs)
Z9-PE2: 750 g (1.7 lbs)
Reliability MTBF 206,186
Safety Class I, Division 2, Groups A-D
UL Z9-P2: Z9-PE2:
General Information
Information to Order
Model Number
Z9-P2 Board Level Unit, 902 to 928 MHz
Z9-PE2 Enclosed Unit, 902 to 928 MHz
Receiver
IF Selectivity > 40 dB
System Gain 135 dB
Sensitivity
RF Data Rates Without FEC With FEC
115.2 kbps -105 dBm -108 dBm
250 kbps -102 dBm -105 dBm
500 kbps -99 dBm -102 dBm
1 Mbps -95 dBm -98 dBm
1.5 Mbps (Beta) -90 dBm -93 dBm
4 Mbps -83 dBm -86 dBm
ZumEdge TM
Transmitter Management
Networking
Interfaces
Power Requirements
General Information
Information to Order
Model Number
Receiver
Data Transmission
Computing Resources (OPTIONAL UPGRADE)**
+6 to +30 VDC
0 to 95% non-condensing
165.28 L x 76.89W x 27.55 (mm))
6.51 L x 3.03 W x 1.08 H (Inches)
ZumEdge
IO Expansion
0.5lbs/250C
MTBF 206,186
Class I, Division 2, Groups A-D
Frequency Range*
Output Power*
Range
Management
VLAN
Serial
Traffic Filtering
Data Connectors
USB Connectors
RF Connector
Power Connectors
Operating Voltage
Voltage Transmit Receive Idle
Current Consumption
Humidity
Dimensions
Weight
Reliability
Safety
UL
Z9-IO-PE-ZE
IOEX-4440; 4422;4404
Operating
Temperature
Channel Spacing
RF Data Rater
IF Selectivity
System Gain
Type
Modulation
Link Throughput
Error Detection
Hopping Rates
Hopping Channels*
Hopping Patterns
Protocol
User Interface Rates
Data Encryption
Advanced Features
CPU
RAM
Storage
OS
Sensitivity RF Data Rates Without FEC With FEC
902 to 928 MHz HTTP, SSH
SNMPv1/v2c/v3, MIB-II, Enterprise MIB,
Modbus
802.1Q
Netmask filter, ARP filter
Four RJ-45 (2 Ethernet, 2 Serial)
TNC
Phoenix Contract (#1776692)
+6 to +30 VDC
12 VDC 377 mA 159 mA 143 mA
Micro USB
Type A (Future Expansion)
TCP server, Modbus/TCP, Modbus RTU,
TCP client
10 mW to 1 W: user selectable
97 km (60 miles) with clear line of sight
Frequency Hopping Spread Spectrum
Up to 1.6 Mbps; 4 Mbps with Compression
ARQ and CRC, retransmit on error, FEC
400, 200, 100, 50, 25 ms
Up to 110; RF Data Rate Dependent
Up to 16; RF Data Rate Dependent
Adaptive Spectrum Learning (ASL)
128-bit and 256-bit AES CCM
Packet Compression and Aggregation
ARM Cortex-A8 1 GHz
1 GB
1 GB
Debian-based Linux
> 40 dB
135 dB
115.2 kbps -105 dBm -108 dBm
250 kbps -102 dBm -105 dBm
500 kbps -99 dBm -102 dBm
1 Mbps -95 dBm -98 dBm
1.5 Mbps (Beta) -90 dBm -93 dBm
4 Mbps -83 dBm -86 dBm
230.4, 345.6, 691.2, 1382.4, 1612.8 (Beta), &
3225.6 kHz
115.2, 250, 500 kbps, 1, 1.5 (Beta), &4 Mbps;
user selectable
2 level GFSK
4- and 8-ary FSK
Ethernet Rate; 10/100 Mbps
Serial Rate; up to 250 kbps