6Genuine OEM Parts 1.800.233.4823 www.morganolsonparts.com
Side Door Removal:
1. Remove the anti rattle clips.
2. Remove the 4 fasteners and the door handles (inner and outer).
3. Using a socket wrench, remove the bolts fastening the door and hanger assembly.
4. To simplify door removal, remove the grab handle located forward of the door.
*Fold side view mirror back.
5. Holding the top of the door in position, pull out on the bottom front corner of the
door until it clears the body of the truck. Then tilt the top of the door down and out
and remove the door.
6. The upper track is mounted to the header channel. Remove the nuts, and the
track.
Reinstall by reversing the removal sequence.
Weather Seal Removal:
1. The forward and rear weather seals are installed simply by sliding into a mated
part. To remove simply pull straight out from the top of the door or door frame.
Install by feeding into the mated part and sliding into place.
Handle Mechanism Removal:
1. To remove the door handles simply remove the 4 mounting screws. Pay special
attention to spacer locations. You can then remove the inside and outside handles.
Remember when installing the handles, position of the spacers identical to the
way they were at removal.
Wear Strip (Lower) Removal:
1. Remove side door.
2. Remove existing rivets.
3. Replace wear strip and rivet in place.
