Frezzi PockerLight III User manual

Quick Start Guide
7 VALLEY STREET
HAWTHORNE, NJ 07506 USA
HTTP://WWW.FREZZI.COM
E-MAIL [e-mail]
PHONE: [phone]
FAX: [phone]
Questions?
Call Tech Support [phone]
8- pm EST M-F
email [e-mail]
READ MANUAL PRIOR TO USE
PocketLight III Manual R1
www.frezzi.com
III
SPECIFICATIONS
Color Temperature: 3200 – 5600K
CRI ≥ 96
Luminous Flux: 1200LM
Run Time: 1 Hour 30 Minutes
LED Count: 180 Elements
Power Consumption: 12W
Battery capacity: 4400mAh
Weight: 6 ounces
Dims: L 5.9” x W 3.175” x .39”
Mount: Cold Shoe 1/4-20 threads
Charge Method: USB
This product has a warranty of 1 year from the
date of purchase against defects in parts and labor.
Pocket Light III
Shoe-Mount
Power Bank Cable
use as USB charger)
Charge Cable
Hard-Case
Mounting Holes Locations
In The Box
Extra Side
Mounting Hole

Please read before use
- Follow all safety instructions listed below
- Familiarize yourself with all components
- High Output - Do not stare directly into LEDs
- Lamp body may become warm to touch during operation,
handle with care
Mounting and Operation
Mounting to a Camera with Shoe
Smart Phone Kit Mounting OPTION
Screw SHOE MOUNT into a 1/4-20 hole
on the bottom of Pocket Light.
TIGHTEN Locking wheel to secure.
Slide SHOE into CAMERA and TIGHTEN locking
wheel to secure.
Mount phone by pulling open Phone Holder
Mount Pocket Light to Phone Holder
If using phone in “Selfie” style for a Skype
interview, mount light the other way.
Pull open Tripod Legs
Phone Holder opens to secure phone
Pull back rear leg
Close Tripod Legs to use as Handgrip
Mount phone older to Tripod
PRESS & HOLD 2 Seconds to TURN ON/OFF
Operation
Rotate Light if shooting Selfie Style
M
4.0h
Run Time
Mode Indicator
Power
PRESS to change from Color to Brightness Adjust
Mode
+
-
Adjust
PRESS to Increase Color Temp/Brightness
PRESS to Decrease Color Temp/Brightness
Charge Input
Use supplied USB charge cable with a USB
compatible charger.
Internal Battery can be used at a USB POWER
BANK with supplied FEMALE USB Adapter.
Control Buttons
LED OUTPUT OFF
PRESS and HOLD the MODE button for
2 seconds will make the brightness to 0%.
The unit will remain ON. Press + button
To increase brightness
Display Icons
Charge