Fridgemaster MTM48120R User manual

MTM48120R
MTM48120S
MTM48120

Contents
Safety and warning information_ __ _ _ _ _
Using your appliance_ _ _ _ __ _ _ _ _ _ _ _
Cleaning and Care _ _ _ _ _ _ _ _ _ _ _ _ _
Troubleshooting _ _ _ _ _ _ _ _ _ _ _
Disposal of the appliance_ _ _ _ _ _ _ _ _ _
Description of the appliance _ _ _ _ _ _ _ _
Operation _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Helpful hints and tips__ _ _ _ _ _ _ _ _ _ _ _
11
11
12
14
15
8
2
For your safety and correct
usage, before installing and
first using the appliance, read
this user manual carefully,
including its hints and
warnings. To avoid
unnecessary mistakes and
accidents, it is important to
make sure that all people
using the appliance are
thoroughly familiar with its
operation and safety
features. Save these
instructions and be sure that
they remain with the
appliance if it is moved or
sold, so that a using it
throughout its life will be
properly informed on its
correct appliance usage and
safety.
For the safety of life and
property, keep the
precautions of these user's
instructions as the
manufacturer is not
responsible for damages
caused by omission.
This appliance can be used
by children aged from 8 years
and above and persons with
reduced physical, sensory or
mental capabilities or lack of
experience and knowledge if
they have been given
supervision or instruction
concerning use of the
appliance in a safe way and
understand the hazards
involved. Children shall not
play with the appliance.
Cleaning and user
maintenance shall not be
made by children without
supervision.
Keep all packaging away
Safety for children and others
who are vulnerable people
This appliance is in accordance with the following EU guidelines:
and 2014/30/EU and 2009/125/EC and EC.643/2009 and 2002/96/EC
2014/35/EU
Installing your new appliance_ _ _ _ _ _ _ _ 7
2
9

from children as there is risk
of suffocation.
If you are discarding the
appliance, pull the plug out of
the socket, cut the
connection cable (as close to
the appliance as you can)
and remove the door to
prevent children playing from
suffering an electric shock or
from closing themselves
inside it.
If this appliance, featuring a
magnetic door seals, is to
replace an older appliance
having a spring lock (latch)
on the door or lid, be sure to
make the spring lock
unusable before you discard
the old appliance. This will
prevent it from becoming a
death trap for a child
General safety
This
appliance is intended
WARNING —
to be used in
and similar applications
such as
household
-staff kitchen areas in
shops, offices and other
working environments;
-farm houses and by clients
in hotels, motels and other
residential type
environments;
-bed and breakfast type
environments;
-catering and similar non-
retail applications
WARNING — Do not store
explosive substances such
as aerosol cans with a
flammable propellant in
this appliance.
WARNING — If the supply
cord is damaged, it must be
replaced by the
manufacturer, its service
agent or similarly qualified
persons in order to avoid a
hazard.
WARNING — Keep
ventilation openings, in the
appliance enclosure or in
the built-in structure, clear
of obstruction.
WARNING — Do not use
mechanical devices or
other means to accelerate
the defrosting process,
other than those
recommended by the
manufacturer.
WARNING — Do not
damage the refrigerant
circuit.
WARNING — Do not use
electrical appliances inside
the food storage
compartments of the
appliance, unless they are
of the type recommended
by the manufacturer.
WARNING — The
refrigerant and insulation
3

1.
be lengthened.
2. Make sure that the power
plug is not or
damaged. A or
damaged power plug may
overheat and cause a fire.
3. Make sure that you can
plug of the
appliance.
4. Do not pull the main
cable.
5. If the power plug socket
is loose, do not insert the
power plug. There is a risk
of electric shock or fire.
6.You must not operate the
The power cord must not
crushed
crushed
access the main
Electrical safety
blowing gas are
flammable. When
disposing of the appliance,
do so only at an authorized
waste disposal centre. Do
not expose to flame.
The refrigerant isobutene
(R600a) is contained within
the refrigerant circuit of the
appliance, a natural gas
with a high level of
environmental
compatibility, which is
nevertheless flammable.
During transportation and
installation of the
appliance, ensure that
none of the components of
the refrigerant circuit
becomes damaged.
The refrigerant (R600a) is
flammable.
Refrigerant
-Thoroughly ventilate the
room in which the
appliance is situated.
It is dangerous to alter the
specifications or modify
this product in any way.
Any damage to the cord
may cause a shortcircuit,
fire, and/or electric shock.
If the refrigerant circuit
should be damaged:
-Avoid opening flames and
sources of ignition.
Caution:risk of fire/flammable
4

appliance without the interior
lighting lamp cover.
7.The fridge is only applied
with power supply of single
phase alternating current of
220~240V/50Hz. If fluctuation
of voltage in the district of
user is so large that the
voltage exceeds the above
scope, for safety sake, be
sure to apply A.C. Automatic
voltage regulator of more
than 350W to the fridge. The
fridge must employ a special
power socket instead of
common one with other
electric appliances. Its plug
must match the socket with
ground wire.
Do not store flammable
gass or liquids in the
appliance,There is a risk
of an explosion.
Do not operate any
electrical appliances
inthe
appliance(e.g.electric ice
cream makers,mixers
etc.).
When unplugging always
pull the plug from the
mains socket,do not pull
on the cable.
Do not place hot items
Daily use
near the plastic
components of this
appliance.
Store pre-packed frozen
food in accordance with the
frozen food manufacture’s
instructions.
The appliances
manufactures storage
recommendations should
be strictly adhered to.Refer
to relevant instructions for
Do not place carbonated of
fizzy drinks in the freeze
compartment as it creates
pressure on the
container,which may cause
it to explode,resulting in
damage to the appliance.
Keep buring candles,lamps
and other items with naked
flames away from the
appliance so that do not set
the appliance on fire.
The appliance is intended
for keeping food stuff
and/or beverages in
normal household as
explained in this
instruction booklet.
storage.
Frozen food can cause
frost burns if consumed
straight from the freezer
compartment.
Do not place the appliance
in direct sunlight.
5

For electrical connection
carefully, follow the
instructions given in this
manual.
Unpack the appliance and
check if there are damages
on it. Do not connect the
appliance if it is damaged.
Report possible damages
immediately to the place you
bought it. In this case retain
packing.
It is advisable to wait at least
four hours before connecting
the appliance to allow the oil
to flow back in the
compressor.
The appliance is
heavy.Care should be
taken when moving it.
Do not remove nor touch
items from the freezer
comartment if your hands
are damp/wet,as this could
cause skin abrasions or
frost/freezer burns.
Never use the base,
drawers, doors etc. to
stand on or as supports.
Never transport the
appliance in a horizontal
position, because the oil in
the compressor may
flow into the refrigerant
circuit.
Frozen food must not be
refrozen once it has been
thawed out.
Do not consume ice
popsicles or ice cubes
straight from the freezer as
this can cause freezer burn
to the mouth
and lips.
To avoid items falling and
causing injury or damage
to the appliance, do not
overload the door racks or
put too much food in the
crisper drawers.
Do not clean the appliance
with metal objects, steam
cleaner, ethereal oils, organic
solvents or abrasive
cleansers.
Do not use sharp objects to
remove frost from the
appliance. Use a plastic
scraper.
Installation Important!
caution!
Care and cleaning
Before maintenance, switch
off the appliance and
disconnect the mains plug
from the mains socket.
6

Adequate air circulation
should be around the
appliance, lacking this leads
to overheating. To achieve
sufficient ventilation, follow
the instructions relevant to
installation.
Wherever possible the back
of the product should be
against a wall to avoid
touching or catching warm
parts (compressor,
condenser) to prevent the
risk of a fire, follow the
instructions relevant to
installation.
The appliance must not be
locate close to radiators or
cookers.
Service
Any electrical work required
to do the servicing of the
appliance should be carried
out by qualified electrician or
competent person.
This product must be
serviced by an authorized
Service Center, and only
genuine spare parts must be
used.
1)If the appliance is Frost
Free.
2)If the appliance contains
freezer compartment.
Make sure that the mains
plug is accessible after the
installation of the appliance.
7
100
100
585
1010
790
75
100
100

8
Description of the appliance
View of the appliance
1 Storage shelf
2.Ice tray
3.Controller part
4.Storage shelf
5.Crisper box Cover
6.Crisper box
7. shelf
8. shelf
9.Upper shelf
10.Eggs tray
.
(optional)
(optional)
Lower
Middle

Operation
Starting up and temperature regulation
The temperature selector knob is located
of the
refrigerator compartment.
at the upper right hand corner
Setting 0 means:
Off.
Clockwise rotate the knob to turn on the
appliance
Setting 1 means:
Highest temperature, warmest setting.
Setting 7 (end-stop) means:
Lowest temperature, coldest setting.
Insert the plug of the connection lead into
the plug socket with protective earth
c o n t a c t . W h e n t h e r e f r i g e r a t o r
compartment door is opened, the internal
lighting is switched on.
Important! Normally we advise you select
setting of 4, if you want the temperature
higher or lower please turn the knob to
warmer or colder setting accordingly. When
you turn the knob to colder setting, it can
consume more energy while to the warmer,
it can be more energy-saving and therefore
increase the energy efficiency.
Important! High ambient temperatures (e.g.
on hot summer days) and a cold setting
(position 6 to 7) may cause the compressor
to run continuously or even non-stop!
Reason: when the ambient temperature is
high, the compressor must run continuously
to maintain the low temperature in the
9
Temp Control Dail
3. Remove screw cover and unscrew the
controller box.
prying.

Operation
10
Remove and install the door rack
Warning:The door rack must remove
and instal carefully by the user! If the
door rack is damaged, contact the
customer helpline or assistance.
To replace the door rack, the below
steps can be followed:
Holding the left side.
Pat the right side of the door rack
upward, until the
.
Similarly, remove the other side.
NOTE:
fastener has been
broken away to the door
You should have a appropriate
impact force on the bottom of the rack.
Install the door racks:
Place the door rack flat on the door.
Push two sides of the door rack down
to the right place at the same time,
make sure the fastener has been
fastened to the door.
Warning:You should position the door
rack to door and snap into place, or
●
●
Remvoe the door rack
pat upward
Install the door rack
●
●
●
push downward