Frigidaire GLGQ642AS4 User manual

OPERATING INSTRUCTIONS
Printed in U.S.A.
Read Drying Procedures in your Owner's Guide.
It explains these operating steps in detail.
1. Prepare items for drying.
Operating Steps
P/N 134066300 (0107)
Versión en español
Si desea obtener una copia en español de estas
Instrucciones de Funcionamiento, sírvase escribir a la
dirección que se incluye a continuación.
Solicite la P/N 131972200.
Spanish Owner's Guides
Electrolux Home Products
P. O. Box 212378
Augusta, Georgia 30917
The REGULAR-HIGH HEAT, PERM PRESS-MEDIUM
HEAT ,and KNITS/DELICATES-LOWHEAT temperature
settings may be used with any cycle setting. The AIR
FLUFF-NO HEAT setting can be used only in the Timed
Dry cycle.
AIR FLUFF-NO HEAT setting tumbles the load without
heat. Use Air Fluff to freshen clothing, pillows or
blankets, or to dust draperies.
Cycle Selection
Turn cycle selector clockwise to desired cycle and
setting.
Each cycle ends with a cool down period. The heat
automaticallyturnsoffandtheloadcontinuestotumble
duringthecooldownperiod.Thisreduceswrinklingand
makes items easier to handle during unloading.
Drying time varies depending on size and dampness of
load, weight and fabric type. Room temperature and
humidity, type of installation and electrical voltage or
gas pressure can also affect drying time.
2. Check that lint screen is clean and in place.
3. Load the dryer. If desired, add a dryer fabric
softener sheet.
4. Close the dryer door.
5. Set Dry Temperature control. Select PRESS
SAVER if desired.
6. Turn cycle selector clockwise to desired
setting.
7. Start dryer. Push the Start button and hold for 1-
2 seconds, or turn the Turn to Start control
clockwisetoON.Holdfor1-2secondsandrelease.
8. A signal will sound toward the end of the cool
down period when the End of Cycle chime is
turned on.
9. Remove items immediately and hang or fold.
10. Clean lint screen after every load.
Temperature Selection
Always follow directions on fabric care
labels.
To avoid fire hazard, do not use heat
todryitemscontainingfeathersordown,foamrubber,
plastics, or similarly textured, rubber-like materials.
Use Air Fluff-No Heat setting only.
Before Operating Your Dryer
Read your dryer Owner's Guide. It has important
safety and warranty information. It also has many
suggestions for best drying results.
To reduce the risk of fire, electric
shock, or injury to persons, read the IMPORTANT
SAFETY INSTRUCTIONS in your dryer owner's guide
before operating this appliance.
PRESS SAVER
COLORS/
WHITES/
COLORS
/
PRESS
SAVER
WHITES
/
PRESS
SAVER
ON OFF
END OF CYCLE
SIGNAL

P/N 134066300 (0107)
Cycle Selection (continued)
Auto Regular/Whites Cycle
This cycle is best for cotton items. Drying time is
determinedautomatically at the temperature selection
of your choice.
• High heat is suggested for cotton items.
• Initially set cycle selector on NORMAL DRY.
• For items requiring more drying time, set cycle
selector on MORE.
• For items requiring less drying time, set cycle
selector on LESS.
Auto Delicate Cycle
Thiscycleis best for knit anddelicate items. Drying time
isdeterminedautomaticallyatthetemperatureselection
of your choice.
• Low heat is suggested for knit and delicate items.
• Initially set cycle selector on NORMAL DRY .
• For items requiring more drying time, set cycle
selector on MORE .
• For items requiring less drying time, set cycle
selector on LESS .
• A signal will sound toward the end of the cool down
period when the End of Cycle chime is turned on.
• If the Press Saver option is turned on, the cycle
selector will advance to the Press Saver setting.
Unheatedtumblingcontinuesduring PressSaver for
16 minutes tohelp reduce wrinkling if the driedload
cannot be removed promptly. A signal will sound
briefly every five minutes as a reminder to remove
the load when the End of Cycle chime is turned on.
Timed Dry Regular Cycle
Thiscycleprovides approximately 60 minutes of drying
time at the temperature selection of your choice.
Auto Perm Press/Colors Cycle
This cycle is best for permanent press items. Drying
time is determined automatically at the temperature
selection of your choice.
• Medium heat is suggested for permanent press
items.
• Initially set cycle selector on NORMAL DRY.
• For items requiring more drying time, set cycle
selector on MORE.
• Foritemsrequiring less drying time, set cycle selector
on LESS.
• A signal will sound toward the end of the cool down
period when the End of Cycle chime is turned on.
• If the Press Saver option is turned on, the cycle
selector will advance to the Press Saver setting.
Unheatedtumblingcontinuesduring PressSaver for
16minutes to help reduce wrinklingif the dried load
cannot be removed promptly. A signal will sound
briefly every five minutes as a reminder to remove
the load when the End of Cycle chime is turned on.
Energy Saving Tips
• Keep the lint screen clean and exhaust the dryer
correctly.
• Sortlaundry properly and select proper temperature
and cycle settings. Choose an automatic dry cycle
whenever possible for accurate drying time.
• Dry only full loads. Single items and small loads
usually take longer to dry.
• Avoid overloading, adding wet items to a partially
dry load, and overdrying.
• Dry one load after another to take advantage of a
warm dryer.
• Opening the door needlessly causes warm air to
escape, which prolongs drying time.
• If possible, use the dryer on low humidity days.
• Install the dryer in an area where the room
temperature is at least 45°F (7°C).
PRESS SAVER
COLORS/
WHITES/
COLORS
/
PRESS
SAVER
WHITES
/
PRESS
SAVER
ON OFF
END OF CYCLE
SIGNAL