Frigidaire A20811504 Owner's manual

Frigidaire.com USA 1-800-374-4432 Frigidaire.ca Canada 1-800-265-8352
Refrigerator
use &care
A20811504 (July 2023)
Introduction.......................................................2
Important Safety Information ....................3
Features..............................................................6
Installation .........................................................8
Door Removal.................................................. 11
Door Handle Installation............................. 16
Water Supply Connection.......................... 17
Controls and Settings.................................. 19
Automatic Ice & Water Dispenser ......... 26
Ice Maker ......................................................... 29
Storage Features........................................... 31
Storing Food and Saving Energy...........36
Normal Operating Sounds........................ 37
Filter Replacement ...................................... 38
Care & Cleaning ............................................. 41
Troubleshooting ..........................................43
Limited Warranty ......................................... 47

2INTRODUCTION
Doors
Handles are secure and tight
Door seals completely to cabinet on
all sides
Leveling
Refrigerator is level side-to-side and
slightly elevated in front to assist
with door and drawer closing (front
should be higher than back)
Cabinet is setting solid on all corners
Electrical Power
House power is turned on
Refrigerator is plugged in
Ice Maker
House water supply is connected
to the refrigerator
WARNING: Potable water supply only.
No water leaks present at all
connections - recheck in 24 hours
Ice maker is turned ON
Ice and water dispenser
operates correctly
Final Checks
Shipping material is removed
Fresh food and freezer
temperatures are set
Crisper humidity controls are set
Registration card is sent in
Installation Checklist

Welcome to our family
Thank you for bringing Frigidaire into
your home! We see your purchase as the
beginning of a long relationship together.
This manual is your resource for the use
and care of your product. Please read
it before using your appliance. Keep it
handy for quick reference. If something
doesn’t seem right, the troubleshooting
section will help you with common issues.
FAQs, helpful tips and videos, cleaning
products, and kitchen and home accessories
are available at Frigidaire.com.
We are here for you! Visit our website,
chat with an agent, or call us if you need
help. We may be able to help you avoid
a service visit. If you do need service, we
can get that started for you.
Let’s make it ocial! Be sure to register
your product.
Keep your product info here so it’s easy
to find.
Model Number
Serial Number
Purchase Date
Serial Number Location

3
WARNING
WARNING indicates a potentially
hazardous situation which, if not avoided,
could result in death or serious injury.
IMPORTANT
IMPORTANT indicates installation, oper-
ation or maintenance information which
is important but not hazard-related.
DANGER
DANGER indicates an imminently
hazardous situation which, if not avoided,
will result in death or serious injury.
CAUTION
CAUTION indicates a potentially
hazardous situation which, if not
avoided, may result in minor or
moderate injury.
Safety Definitions
This is the safety alert symbol. It is
used to alert of potential personal injury
hazards. Obey all safety messages that
follow this symbol to avoid possible injury
or death.
WARNING
Please read all instructions before using
this appliance.
IMPORTANT SAFETY INFORMATION
DANGER
DANGER Risk of fire or explosion.
Flammable refrigerant used. Do not use
mechanical devices to defrost refrigera-
tor. Do not puncture refrigerant tubing.
DANGER Risk of fire or explosion.
Flammable refrigerant used. To be re-
paired only by trained service person-
nel. Use only manufacturer-authorized
service parts. Any repair equipment
used must be designed for flammable
refrigerants. Follow all manufacturer
repair instructions. Do not puncture
refrigerant tubing.
CAUTION
CAUTION Risk of fire or explosion.
Dispose of refrigerator properly
in accordance with the applicable
federal or local regulations. Flammable
refrigerant used.
CAUTION Risk of fire or explosion
due to puncture of refrigerant tubing.
Follow handling instructions carefully.
Flammable refrigerant used.
WARNING
CALIFORNIA RESIDENTS ONLY
Cancer and Reproductive Harm
www.P65Warnings.ca.gov

4
IMPORTANT
CFC/HCFC Disposal
Your old refrigerator may have a
cooling system that used CFCs or
HCFCs (chlorofluorocarbons or
hydrochlorofluorocarbons). CFCs
and HCFCs are believed to harm
stratospheric ozone if released to the
atmosphere. Other refrigerants may
also cause harm to the environment if
released to the atmosphere.
If you are throwing away your old
refrigerator, make sure the refrigerant
is removed for proper disposal by a
qualified technician. If you intentionally
release refrigerant, you may be subject
to fines and imprisonment under
provisions of environmental legislation.
IMPORTANT SAFETY INFORMATION
Safety Instructions
• DO NOT store or use gasoline,
or other flammable liquids in
the vicinity of this or any other
appliance. Read product labels for
warnings regarding flammability and
other hazards.
• DO NOT operate the refrigerator in
the presence of explosive fumes.
• Avoid contact with any moving parts
of automatic ice maker.
• Remove all staples from the carton.
Staples can cause severe cuts and
also destroy finishes if they come
in contact with other appliances
or furniture.
Child Safety
Destroy or recycle the carton, plastic
bags, and any exterior wrapping material
immediately after you unpack the
refrigerator. Children should NEVER use
these items to play. Cartons covered with
rugs, bedspreads, plastic sheets or stretch
wrap may become airtight chambers, and
can quickly cause suocation.
WARNING
Do not use electrical appliances inside
the food storage compartments of the
appliance unless they are of the type
recommended by the manufacturer.
Proper Disposal of your Appliance
Risk of child entrapment
Child entrapment and suocation are
not problems of the past. Junked or
abandoned appliances are still dangerous
– even if they will sit for “just a few days”.
If you are getting rid of your old unit,
please follow the instructions below to
help prevent accidents.
We strongly encourage responsible
appliance recycling/disposal methods.
Check with your utility company or
visit energystar.gov/recycle for more
information on recycling your old unit.
Before you throw away your old unit:
• Remove the doors.
• Leave shelves in place so children
may not easily climb inside.
• Have a qualified service technician
remove refrigerant.

5
Electrical information
• Plug the refrigerator into its own
dedicated 115 Volt, 60 Hz., 15 Amp,
AC only electrical outlet. The power
cord of the appliance is equipped
with a 3-prong grounding plug for
your protection against electrical
shock hazards. You must plug it
directly into a properly grounded
3-prong receptacle. You must
install the receptacle in accordance
with local codes and ordinances.
Consult a qualified electrician. Avoid
connecting the refrigerator to a
Ground Fault Interrupter (GFI) circuit.
Do not use an extension cord or
adapter plug.
• If the power cord is damaged,
an authorized service technician
should replace it to prevent any risk.
• Never unplug the refrigerator by
pulling on the power cord. Always
grip the plug firmly, and pull it straight
out from the receptacle to prevent
damaging the power cord.
• Unplug the refrigerator before
cleaning and before replacing a light
bulb to avoid electrical shock.
• Performance may be aected if
the voltage varies by 10% or more.
Operating the refrigerator with
insucient power can damage the
compressor. Such damage is not
covered under your warranty.
• Do not plug the unit into an
electrical outlet controlled by a
wall switch or pull cord to prevent
the refrigerator from being turned
o accidentally.
IMPORTANT
Pressing and holding the On/O but-
ton, located on the appliance control
display, for 3 seconds will disable your
refrigerator’s cooling system but does
not disconnect the power to the light
bulb and other electrical components.
To turn o power to your refrigerator
you must unplug the power cord from
the electrical outlet.
Grounding type wall receptacle
Power cord with
3-prong grounded plug
Do not, under
any circumstances,
cut, remove,
or bypass the
grounding prong.
CAUTION
To avoid personal injury or property
damage, handle tempered glass shelves
carefully. Shelves may break suddenly
if nicked, scratched, or exposed to
sudden temperature change.
IMPORTANT SAFETY INFORMATION

6
IMPORTANT
Accessories are available for your appliance and may be purchased at
Frigidaire.com or by calling 1-800-374-4432 (Frigidaire.ca or 1-800-265-8352 in
Canada) or from an authorized seller.
AIce/Water Dispenser
B External Appliance Control Display
CCondiment Bin
DL-Shaped Bin
EDairy Bin
FFlipper Mullion
GGallon Bin
HSlim Bin
IFresh Food Ice Maker and Bin
JFlipper Guide
KAir Filter
LEdge-to-Edge Glass Shelving
MCrispers
NWater Filter
O Deli Drawer
PUpper Freezer Baskets
QLower Freezer Baskets
RDoor Bins
External Water Dispenser Model
FEATURES
Quick
Freeze
B
C
D
EF
G H I
J
K
M
N
O
P
Q
R
L
A
L
R
R

7
FEATURES
IMPORTANT
Accessories are available for your appliance and may be purchased at
Frigidaire.com or by calling 1-800-374-4432 (Frigidaire.ca or 1-800-265-8352 in
Canada) or from an authorized seller.
ANon-Dispenser Appliance Control
Display (side door)
BCondiment Bin
CGallon Bin
DFlipper Mullion
EFlipper Guide
FAir Filter
GEdge-to-Edge Glass Shelving
HCrispers
IWater Filter
J Deli Drawer
KFreezer Ice Maker
LUpper Freezer Baskets
MLower Freezer Baskets
NDoor Bins
Non- Dispenser Model
G
B
C
D
E
F
G
H
I
K
M
N
L
J
A
C
C
N
N

8
Tools Necessary:
Phillips Head
or
Quadrex Head
Screwdriver
(OR) OR
⅜" and ¼"
Socket
Wrench
Adjustable
Wrench
OR
⅜"
Fixed
Wrench
ANDAND
6mm
Allen Wrench
INSTALLATION
CAUTION
Do Not install the refrigerator where
the temperature will drop below 55°F
(13°C) or rise above 110°F (43°C).
The compressor will not be able to
maintain proper temperatures inside
the refrigerator.
This Use & Care Manual provides general
installation and operating instructions
for your model. We recommend
using a service or kitchen contracting
professional to install your refrigerator.
Use the refrigerator only as instructed in
this Use & Care Manual. Before starting
the refrigerator, follow these important
first steps.
Location
• Choose a place near a grounded, non-
GFCI, electrical outlet. Do Not use an
extension cord or an adapter plug.
• If possible, place the refrigerator
out of direct sunlight and away
from the range, dishwasher, or
other heat sources.
• You must install the refrigerator on a
floor that is level and strong enough
to support a fully loaded refrigerator.
• Consider water supply availability
for models equipped with an
automatic ice maker.
Top Hinge
Cover Front
Screw
Top Hinge
Cover Rear
Screw
Lower
Hinge
Screw
Top
Hinge
Screw
Components Provided:
WARNING
Installation
Allow the following clearances for ease
of installation, proper air circulation, and
plumbing and electrical connections:
• Sides & Top ³⁄8" (9.5 mm)
• Back 1" (25.4 mm)
WARNING
This appliance is intended for use
in residential household and similar
interior applications such as:
• Kitchen / Kitchenette
• Pantry Room
• Basement
• Enclosed Garage
• Other interior
residential-type environments

9
INSTALLATION
NOTE
If you place your refrigerator with the
door hinge side against a wall, you may
have to allow additional space so the
door can open wider.
NOTE
Product is shipped with doors adjusted
to the lowest position on the hinges.
Door opening
Position your refrigerator to allow easy
access to a counter when removing food.
For best use of refrigerator drawers and
freezer baskets, position the refrigerator
in a position where both can fully open.
3. Ensure both doors are bind-free with
their seals touching the cabinet on all
4 sides and the cabinet is stable.
4. After unit is leveled, lower the anti-
tip leg until it firmly contacts the
floor. An adjustable wrench may be
necessary for adjustment.
Cabinet Leveling & Refrigerator
Door Alignment (if necessary)
Guidelines for final positioning
of refrigerator:
• All 4 corners of the cabinet must
rest firmly on the floor.
• Slightly elevate the front to ensure
the doors close and seal properly.
• Align the doors with each other and
level them.
You can meet most of these conditions
by raising or lowering the adjustable
front rollers.
To level the cabinet using the front rollers:
1. Slightly open the freezer drawer to
reveal the adjustable rollers at the
bottom of the cabinet.
2. Use the front roller height adjusting
screws to make initial cabinet
adjustments. Use a ³⁄8" socket
wrench to turn the adjustment
screws (1 per side).
To raise the unit: Turn the
adjustment screw clockwise.
To lower the unit: Turn the
adjustment screw counterclockwise.
Door
Door
To make final door height adjustments:
1. Open the freezer drawer to access
hinges for the fresh food doors.
2. Insert the 6 mm AllenTM wrench
into the shaft of the lower hinge.
(Included with unit)
To lower door: turn the adjustment
screw counterclockwise if looking
at the door from below.
To raise door: turn the adjustment
screw clockwise if looking at the
door from below.
Raise
Lower
Anti-tip
Leg

10 INSTALLATION
Adjusting Flipper Mullion Screw
2. Adjust the flipper mullion height.
For proper connection with
the flipper mullion guide, there
should be a separation about the
thickness of a coin (0.060 inches,
or 1.5 mm) between the guide and
flipper mullion.
3. Retighten the screws.
To adjust the flipper mullion:
1. Loosen the two screws located on
the flipper mullion hinge.
Adjusting Flipper Mullion Height
Flipper
Mullion
Screws
Flipper Mullion
Adjust the flipper mullion for proper
connection with the mullion guide by
ensuring the flipper mullion is folded and
perpendicular to the fresh food door. If
the mullion guide is not in the correct
position, it could prevent the door from
closing completely.
WRONG
Flipper
Mullion
Mullion
Guide
Thickness
of a Coin

11
DOOR REMOVAL
WARNING
Unplug the electrical power cord ifrom
the wall outlet.
Getting through narrow spaces
If your refrigerator will not fit through an
entrance area, you can remove the doors.
Check first by measuring the entrance.
To prepare for removing the doors:
1. Unplug the electrical power cord
from the wall outlet.
2. Remove any food from the door
shelves and close the doors.
Right Door Non-Dispenser Unit
Right Door Dispenser Unit
Left Door Dispenser Unit
Left Door Non- Dispenser Unit
To remove refrigerator doors:
1. Remove the three screws from both
hinge covers on the left and right
top of the cabinet, taking care not to
damage the electrical connections
or sensors.
2. After you remove the hinge covers,
disconnect any harnesses between
the cabinet and doors by grasping
both sides of the connector firmly,
depress the latch and pull apart.

12 DOOR REMOVAL
5. Pull the water tube out of the
conduit from the top of the cabinet.
Press
Press
Press
Press
6. Open both doors to a 90° angle.
NOTE
You will be pulling approximately five
feet of water tube from the back of the
refrigerator. Use care while pulling the
water tube from the unit to be sure you
do not kink the tube.
90˚
CAUTION
Set aside the doors in a secure position
where they cannot fall and cause
personal injury or damage the doors
or handles.
3. Lightly trace around the door’s
top hinges with a pencil. This makes
reinstallation easier.
4. Remove the bulkhead cover at the
rear of the unit to access the water
tubing. Disconnect the water tube
at the push-lock connection on the
rear of the unit below the bulkhead.
The dispenser line is connected to
the yellow water line coming from
the main water valve.

13
DOOR REMOVAL
7. Remove the hex screws from the top
hinge plate, and then remove the
top hinge.
8. Lift the doors o the bottom hinges
and set aside.
9. Unscrew the three bottom hinge
screws and remove the bottom hinges.
Lower Hinge Removal
Pin
Mechanism
Bottom
Hinge
Opening
NOTE
When reinserting the water tube and
replacing the top hinge cover, use care
to not kink the tube. The water line may
also be dicult to pass back through
the conduit inside the cabinet
To reinstall the refrigerator doors:
1. Replace the three bottom hinge
screws and hinges on both sides
of the cabinet. Snugly tighten the
screws to the hinges on both sides
of the cabinet before reinstalling
the doors.
2. Holding the door at a 90° angle,
drop the pin down into the bottom
hinge opening. Slightly rotate it in
either direction until the door falls
onto the hinge and is fully seated.

14 DOOR REMOVAL
Bottom of the Doors
For
RIGHT DOOR,
turn pin 90˚
counter-
clockwise
For
LEFT DOOR,
turn pin 90˚
clockwise
To reset the door pin:
If you remove the doors at less than a
40° angle, the pin returns to the home
position. You can reset it by turning the
door upside down and using a 5/32"
Allen wrench to rotate the left hand pin
90° clockwise and the right hand pin
90° counterclockwise.
Once the door pins are reset, follow the
steps To reinstall the refrigerator doors.
3. Reinstall the top hinges and screws.
4. Insert and feed the water line back
into the conduit at the top left door
hinge until the tube reappears at the
rear of unit.
5. Reconnect all harnesses.
6. Replace the top hinge covers
and screws.
7. Reconnect the water line to the
push-lock connection and reinstall
the water line bulkhead cover at the
rear of the unit.
8. Reconnect the electrical power cord
to the wall outlet.
NOTE
Upon replacement, fully insert the tube
up to the marking line.
Push
Push

15
DOOR REMOVAL
CAUTION
Drawer is heavy. Use caution when lifting.
To remove the freezer drawer:
1. Remove the four hex head drawer
screws (two per side) securing the
drawer to the slide assemblies.
2. Lift up the drawer to remove it.
Remove
Hex Head
Drawer
Screw
CAUTION
Do Not loosen or remove the 3 hex screws.
NOTE
The pin is inside the drawer next to the
door liner and the slides. Not all parts
are shown in the illustration.
To replace the freezer drawer:
1. Extend the freezer slides from the unit.
2. Carefully align the support pin with
the hooks on the end of the freezer
slides, and then lower the freezer
door onto the slides.
3. Replace the four hex head screws
securing the slides to the door (two
per side) and tighten.

16 DOOR HANDLE INSTALLATION
CAUTION
Wear gloves and safety goggles. Use extreme CAUTION when installing these handles.
NOTE
Tighten all set screws so the screw is below the surface of the handle. Tightly draw
the handles to the freezer and refrigerator doors with no gaps. Open the opposite
door while tightening the Allen screw to make installation easier.
The door handle may loosen over time or if you improperly installed it. If this hap-
pens, tighten the set screws on the handles.
Door Handle
Mounting Instructions
1. Remove the handles and any
other protective packaging
from the carton.
2. Position the refrigerator handle
end caps over the upper and
lower pre-installed shoulder
bolts (A) fastened into the
door, ensuring the holes for
the set screws are facing the
opposite door.
3. While firmly holding the handle
against door, fasten the upper
and lower Allen set screws (B)
with the supplied Allen wrench.
4. Repeat steps 2 and 3 to install
the opposite handle. Ensure
the holes for the set screws are
facing the opposite door.
5. Position the freezer handle end
caps over the left and right
pre-installed shoulder bolts (A)
fastened to the door, ensuring
the holes for the set screws are
facing down.
6. While firmly holding the handle
against the door, loosely tighten
the right Allen set screw (B)
with supplied Allen wrench until
there is no gap between the
handle and the door.
7. Still holding the handle firmly
to the door, firmly tighten the
left Allen set screw (B) with the
supplied Allen wrench.
8. Return to the right Allen set
screw (B) and firmly tighten it
with the supplied Allen wrench.
Mounting Refrigerator Handles
NOTE
When tightening the Allen set screws, apply
force to the longer arm of the Allen wrench
supplied in the handle packaging.
Mounting Freezer Handle
A A
B B
A A
AA
B
B
B
B

17
WATER SUPPLY CONNECTION
WARNING
To avoid electric shock, which can
cause death or severe personal injury,
disconnect the refrigerator from the
electrical power before connecting a
water supply line to the refrigerator.
NOTE
Check with your local building authority
for recommendations on water lines and
associated materials prior to installing
your new refrigerator. Depending on
your local/state building codes, we rec-
ommend for homes with existing valves
Smart Choice®water line kit 5305513409
with a 6ft. (1.8 meters) Stainless Steel
Water Line, and for homes without an
existing valve, Smart Choice®water line
kit 5305510264 with a 20ft. (6meters)
Copper Water Line with self-tapping
saddle valve. Please refer to Frigidaire.
com for more information.
CAUTION
To Avoid Property Damage:
• We recommend copper or stainless
steel braided tubing for the water
supply line. We do not recommend
using water supply tubing made
of ¼" plastic. Plastic tubing greatly
increases the potential for water
leaks, and the manufacturer will not
be responsible for any damage if you
use plastic tubing for the supply line.
• DO NOT install water supply tubing
in areas where temperatures fall
below freezing.
• Chemicals from a malfunctioning
water softener can damage the
ice maker. If your home has a
water softening system, ensure
you maintain the softener and it is
working properly.
IMPORTANT
Ensure your water supply line connections
comply with all local plumbing codes.
Before Installing The Water Supply Line,
You Will Need:
• Basic Tools: adjustable wrench,
flat-blade screwdriver, and
PhillipsTM screwdriver
• Access to a household cold water
line with water pressure between 30
and 100psi.
• A water supply line made of ¼"
(6.4mm) OD, copper or stainless
steel tubing. To determine the length
of tubing needed, measure the
distance from the ice maker inlet
valve at the back of the refrigerator
to your cold water pipe. Then add
approximately 6 ft. (1.8 meters) , so
you can move the refrigerator out
for cleaning (as shown).
• A shuto valve to connect the water
supply line to your household water
system. DO NOT use a self-piercing
type shuto valve.
• Do not reuse compression fitting or
use thread seal tape.
• A compression nut and ferrule
(sleeve) for connecting a copper
water supply line to the ice maker
inlet valve.
To Connect Water Supply Line To Ice
Maker Inlet Valve:
1. Disconnect the refrigerator from the
electrical power source.
2. Place the end of the water supply
line into a sink or bucket. Turn ON
the water supply and flush the supply
line until water is clear. Turn OFF the
water supply at the shuto valve.
3. Remove the plastic cap from the
water valve inlet and discard the cap.

18
IMPORTANT
Your refrigerator’s water supply system
includes several tubing lines, a water filter,
and a water valve. To ensure your water dis-
penser works properly, you must completely
fill this system with water when your refrig-
erator is first connected to the household
water supply line.
WATER SUPPLY CONNECTION
NOTE
These instructions do not cover after market
ice maker installation. Use the instructions
in after market ice maker kit.
4. If you use copper tubing - Slide the brass
compression nut, and then the ferrule
(sleeve) onto water supply line. Push water
supply line into water valve inlet as far as
it will go (¼"/6.4mm). Slide the ferrule
(sleeve) into the valve inlet and finger
tighten the compression nut onto the valve.
Tighten another half turn with a wrench;
DO NOT over tighten. See Figure 1.
If you use braided flexible stainless steel
tubing - The nut is already assembled on
the tubing. Slide the nut onto the valve inlet
and finger tighten the nut onto the valve.
Tighten another half turn with a wrench;
DO NOT over tighten. See Figure 2.
5. With a steel clamp and screw, secure the
water supply line to the rear panel of the
refrigerator as shown.
6. Coil the excess water supply line (copper
tubing only), about 2½turns, behind the
refrigerator, as shown, and arrange the coils
so they do not vibrate or wear against any
other surface. Do not kink the tubing.
7. Turn ON the water supply at the shuto
valve and tighten any connections that leak.
8. Reconnect the refrigerator to the electrical
power source.
9. To turn ice maker on, ensure the ice maker
is enabled on display (LED will be lit) or set
the ice maker’s On/o power switch to the
ON position (freezer ice maker).
Figure 1
A
B
C
D
E
F
G
A
H
F
G
Figure 2
ASteel Clamp
BBrass Compression Nut
CFerrule (Sleeve)
DCopper Water Line*
EWater Valve Bracket
FValve Inlet
GWater Valve
H 6 ft. (1.8 meters) Braided Flexible
Stainless Steel Water Line
*Include enough tubing in the loop to allow
moving the refrigerator out for cleaning

19
CONTROLS AND SETTINGS
Awake Mode Display
Awake Mode
To change from sleep mode (on) to awake mode (o), simultaneously press and hold
Crush and Light for 5 seconds. The display shows the current temperature/ice maker
status. A tone confirms.
Quick
Freeze
Sleep Mode
As a default, the display goes to sleep after a short time. If you press any icon, the
display awakens. After a short time, it goes back to sleep. When in sleep mode, wake
up the appliance control display to confirm the ice maker is on/o. You can turn sleep
mode o to have the display on full time (awake mode). When sleep mode is o, the
display is always illuminated. To turn sleep mode on/o, simultaneously press and
hold Crush and Light for 5 seconds. A tone confirms.
Sleep Mode Display
Quick
Freeze
External Water Dispenser Appliance Control Display Mode Views

20 CONTROLS AND SETTINGS
1Freeze Boost (on/o)
Prior to grocery shopping, we
recommend you activate Freeze
Boost to lower the temperature and
freeze food faster. Freeze Boost
remains active for up to 24 hours.
before automatically deactivating,
or manually exit by pressing Freeze
Boost to turn the function o. This
resets the freezer to the previous
temperature setting.
2Ice Maker
Press and hold for 3 seconds to
turn the ice maker on/o. When
the indicator lights, the ice maker is
on. When indicator is not lit, the ice
maker is in the OFF state and stops
making ice. While o, ice dispensing
continues as long as ice is in the
bucket. When ice maker is o and
ice is dispensing, the indicator blinks.
3Use the lock button to lock the
display preventing it from being
used in certain situations. Press
and hold for 3 seconds to enable/
disable. While in the locked state,
you cannot make changes to
settings on the display. Dispensing
ice and water is disabled. The
indicator flashes and an audible
warning tone plays.
4Power Outage
In the event of a power outage,
Power Outage illuminates once you
have restored power, and a tone
sounds. Press any button to silence
the tone.
5Adjusting Temp
Illuminates when you change
temperatures on the display and
remain illuminated until you reach
the desired temperatures inside the
refrigerator and freezer. Press either
the +or —to adjust to desired
temperature setting.
Freezer temp - Control
temperatures range from -6°F /
-21°C to 6°F / -15°C.
Refrigerator temp - Control
temperatures range from 34°F / 1°C
to 44°F / 7°C. This unit is designed
to operate at 37°F Refrigerator/
0°F Freezer. The unit should
stabilize temperatures within 24
hours of installation.
1
2
3
5
10
6
7
9
8
11 12
13
14
4
15
External Water Dispenser Appliance Control Display