Frigidaire FPRU19F8WF1 Owner's manual

Frigidaire.com USA 1-800-374-4432 Frigidaire.ca Canada 1-800-265-8352
use
&
care
REFRIGERATOR
A16366504 (February 2021)
Introduction.......................................................2
Important Safety information.....................3
Features .............................................................6
Installation .........................................................8
Door Reversal .................................................10
Door Removal.................................................. 11
Door Handle Installation............................. 12
Water Supply Connection.......................... 13
Controls and Settings.................................. 16
Automatic Water Dispenser.....................20
Storage Features........................................... 21
Saving Energy ............................................... 23
Filter Replacement ...................................... 24
Care and Cleaning ....................................... 27
Troubleshooting .......................................... 29
Limited Warranty ......................................... 32

2INTRODUCTION
Doors
Handles are secure and tight
Door seals completely to cabinet on
all sides
Door is level from side to side across
the top
Leveling
Appliance is level, side to side and
front to back
Cabinet is setting solid on all corners
Anti-tip bracket set in front (hinge side)
Electrical Power
House power turned on
Appliance plugged in
Water Supply
House water supply connected
to appliance
No water leaks present at all
connections - recheck in 24 hours
Final Checks
Shipping material removed
Registration card sent in
Installation Checklist

Welcome to our family
Thank you for bringing Frigidaire into
your home! We see your purchase as the
beginning of a long relationship together.
This manual is your resource for the use
and care of your product. Please read
it before using your appliance. Keep it
handy for quick reference. If something
doesn’t seem right, the troubleshooting
section will help you with common issues.
FAQs, helpful tips and videos, cleaning
products, and kitchen and home accessories
are available at Frigidaire.com.
We are here for you! Visit our website,
chat with an agent, or call us if you need
help. We may be able to help you avoid
a service visit. If you do need service, we
can get that started for you.
Let’s make it ocial! Be sure to register
your product.
Keep your product info here so it’s easy
to find.
Model Number ____________________
Serial Number ____________________
Purchase Date ____________________
Serial Number Location
jfk;fkda;jfdajfk;fkda;jfda jfk;fkda;jfda jfk;fkda;jfda
jfk;fkda;jfdajfk;fkda;jfda jfk;fkda;jfda jfk;fkda;jfda
jfk;fkda;jfdajfk;fkda;jfda jfk;fkda;jfda jfk;fkda;jfda
jfk;fkda;jfdajfk;fkda;jfda jfk;fkda;jfda jfk;fkda;jfda
jfk;fkda;jfdajfk;fkda;jfda jfk;fkda;jfda jfk;fkda;jfda
jfk;fkda;jfdajfk;fkda;jfda jfk;fkda;jfda jfk;fkda;jfda
jfk;fkda;jfdajfk;fkda;jfda jfk;fkda;jfda jfk;fkda;jfda
jfk;fkda;jfdajfk;fkda;jfda jfk;fkda;jfda jfk;fkda;jfda

3
WARNING
WARNING indicates a potentially haz-
ardous situation which, if not avoided,
could result in death or serious injury.
IMPORTANT
IMPORTANT indicates installation, oper-
ation or maintenance information which
is important but not hazard-related.
DANGER
DANGER indicates an imminently haz-
ardous situation which, if not avoided,
will result in death or serious injury.
CAUTION
CAUTION indicates a potentially haz-
ardous situation which, if not avoided,
may result in minor or moderate injury.
Safety Definitions
This is the safety alert symbol. It is used
to alert of potential personal injury hazards.
Obey all safety messages that follow this
symbol to avoid possible injury or death.
WARNING
Please read all instructions before using
this appliance.
IMPORTANT SAFETY INFORMATION
DANGER
DANGER Risk of fire or explosion.
Flammable refrigerant used. Do not use
mechanical devices to defrost refrigera-
tor. Do not puncture refrigerant tubing.
DANGER Risk of fire or explosion.
Flammable refrigerant used. To be re-
paired only by trained service person-
nel. Use only manufacturer-authorized
service parts. Any repair equipment
used must be designed for flammable
refrigerants. Follow all manufacturer
repair instructions. Do not puncture
refrigerant tubing.
CAUTION
CAUTION Risk of fire or explosion.
Dispose of refrigerator properly
in accordance with the applicable
federal or local regulations. Flammable
refrigerant used.
CAUTION Risk of fire or explosion
due to puncture of refrigerant tubing.
Follow handling instructions carefully.
Flammable refrigerant used.
WARNING
CALIFORNIA RESIDENTS ONLY
Cancer and Reproductive Harm
www.P65Warnings.ca.gov

4IMPORTANT SAFETY INFORMATION
Safety Instructions
• DO NOT store or use gasoline, or
other flammable liquid within or in the
vicinity of this appliance. Read Product
Label for warnings regarding flamma-
bility and other hazards.
• DO NOT store explosive substances
such as aerosol cans with a flammable
propellant in this appliance.
• DO NOT operate the refrigerator in the
presence of explosive fumes.
• Avoid contact with any moving parts
of automatic ice maker.
• Remove all staples from the carton.
Staples can cause severe cuts, and also
destroy finishes if they come in contact
with other appliances or furniture.
Child Safety
This appliance is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities, or
lack of experience and knowledge, unless
they have been given supervision or in-
struction concerning use of the appliance
by a person responsible for their safety.
Destroy or recycle the carton, plastic
bags, and any exterior wrapping mate-
rial immediately after the refrigerator is
unpacked. Children should NEVER use
these items to play. Cartons covered with
rugs, bedspreads, plastic sheets or stretch
wrap may become airtight chambers, and
can quickly cause suocation.
Proper Disposal of your Appliance
Risk of child entrapment
Child entrapment and suocation are not
problems of the past. Junked or aban-
doned appliances are still dangerous –
even if they will sit for “just a few days”. If
you are getting rid of your old appliance,
please follow the instructions below to
help prevent accidents.
We strongly encourage responsible
appliance recycling/disposal methods.
Check with your utility company or visit
energystar.gov/products/recycle for
more information on recycling your old
appliance.
Before you throw away your old appliance:
• Remove door.
• Leave shelves in place
so children may not
easily climb inside.
• Have refrigerant re-
moved by a qualified
service technician.

5
Grounding type wall receptacle
Power cord with
3-prong grounded plug
Do not, under
any circumstances,
cut, remove,
or bypass the
grounding prong.
Electrical information
• Plug the appliance into its own ded-
icated 115 Volt, 60 Hz., 15 Amp, AC
only electrical outlet. The power cord
of the appliance is equipped with a
3-prong grounding plug for your pro-
tection against electrical shock haz-
ards. Plug it directly into a properly
grounded 3-prong receptacle. Install
the receptacle in accordance with
local codes and ordinances. Consult a
qualified electrician. Avoid connect-
ing the appliance to a Ground Fault
Interrupter (GFI) circuit. Do not use
an extension cord or adapter plug.
• If the power cord is damaged, an
authorized service technician should
replace it to prevent any risk.
• Never unplug the appliance by pull-
ing on the power cord. Always grip
the plug firmly, and pull straight out
from the receptacle to prevent dam-
aging the power cord.
• Unplug the appliance before cleaning
to avoid electric shock.
• Performance may be aected if the
voltage varies by 10% or more. Oper-
ating the appliance with insucient
power can damage the compressor.
Such damage is not covered under
your warranty.
• Do not plug the unit into an electrical
outlet controlled by a wall switch or
pull cord to prevent the appliance
from being turned o accidentally.
• WARNING: Do not use electrical ap-
pliances inside the food storage com-
partments of the appliance unless
they are recommended accessories
for use within this model.
IMPORTANT SAFETY INFORMATION
WARNING
These guidelines must be followed to
ensure that safety mechanisms in this
appliance will operate properly.
IMPORTANT
To turn o power to your appliance you
must unplug the power cord from the
electrical outlet.
IMPORTANT
CFC/HCFC Disposal
Your old appliance may have a cooling
system that used CFCs or HCFCs (chlo-
rofluorocarbons or hydrochlorofluoro-
carbons). CFCs and HCFCs are believed
to harm stratospheric ozone if released
to the atmosphere. Other refrigerants
may also cause harm to the environ-
ment if released to the atmosphere.
If you are throwing away your old
appliance, make sure the refrigerant
is removed for proper disposal by a
qualified technician. If you intentionally
release refrigerant, you may be subject
to fines and imprisonment under provi-
sions of environmental legislation.

6FEATURES
*Features may vary according to model
ALower Drawer with
Removable Dividers
BSlide-out Shelf
CWater Filter
DAppliance Control Display
ECrispSeal Plus Drawer with Auto
Humidity and Produce Keeper™
FInternal Water Dispenser
GAdjustable Full Width
Glass Shelves
HAir Filter
I*Multi-Port Air Exhaust Ducts
JLED Lighting
KAdjustable Half Gallon Door Bins
with Removable Dividers
LAdjustable Gallon Door Bin with
Removable Divider
MAdjustable Tall Item Door Bins
with Removable Dividers
A
B
CD
E
F
G
H
K
L
M
J
G
K
J J
JJ
M
J
I
I
I
I
IMPORTANT
*Do not place items in front of the
Multi-Port Air Exhaust Ducts as this will
impact temperature performance.

7
IMPORTANT
Accessories are available for your appliance and may be purchased at
Frigidaire.com or by calling 1-800-374-4432 (Frigidaire.ca or 1-800-265-8352 in
Canada) or from an authorized seller.
FEATURES
IMPORTANT
Cleaning your Appliance
Remove tape and glue residue from surfaces before turning on the appliance. Rub
a small amount of liquid dish soap over any remaining adhesive with your fingers.
Rinse with warm water and dry with a soft cloth.
Do not use sharp instruments, rubbing alcohol, flammable fluids, or abrasive cleaners
to remove tape or glue. These products can damage the surface of your appliance.
After you remove all of the package materials, clean the inside of your appliance
before using it. See the CARE & CLEANING section in this manual.
See important information about cleaning glass shelves and covers in the STORAGE
FEATURES section of this manual.
IMPORTANT
Moving your Appliance
Your appliance is heavy. When moving the appliance for cleaning or service, raise
the anti-tip bracket (see “Setting the anti-tip bracket”). Be sure to cover the floor
with cardboard or hardboard to avoid floor damage. Always pull the appliance
straight out when moving it. Do not wiggle or “walk” the appliance when trying to
move it as floor damage could occur.

8
NOTE
If your appliance is placed with the door
hinge side against a wall, you may have
to allow additional space for the handle
so the door can be opened wider.
This Use & Care Manual provides general
operating instructions for your model. Use
the appliance only as instructed in this Use
& Care Manual. Before starting the appli-
ance, follow these important first steps.
Installation
Installation clearances
Allow the following clearances for ease
of installation, proper air circulation, and
plumbing and electrical connections:
Sides 3/16"
Top & Back 1"
Location
• Choose a place that is near a ground-
ed electrical outlet. Do Not use an
extension cord or an adapter plug.
• If possible, place the appliance out of
direct sunlight and away from the range,
dishwasher or other heat sources.
• Install the appliance on a floor that is
level and strong enough to support a
fully loaded appliance.
Refrigerator
3/16˝
(5 mm)
3/16˝
(5 mm)
1˝
(25 mm)
1˝(25 mm)
INSTALLATION
Leveling
Rest all bottom feet firmly on a
solid floor.
The floor must be strong enough to
support a fully loaded appliance.
It is VERY IMPORTANT for your unit to
be level in order to function properly.
If the appliance is not leveled during
installation, the door may be misaligned
and not close or seal properly, causing
cooling, frost or moisture problems.
To Level the Appliance:
Level the unit using a carpenter’s level.
Adjust the leveling feet at the front making
minor adjustments to the rear leveling feet
as needed. Level the unit front to back and
side to side. Make sure all 4 feet fully touch
the floor.
x2
x2
WARNING
DO NOT install the appliance where
the temperature will drop below 55°F
(13°C) or rise above 110°F (43°C). The
compressor will not be able to maintain
proper temperatures inside the unit.
CAUTION
Do not block the lower front of your ap-
pliance. Sucient air circulation is essen-
tial to operate your appliance properly.
CAUTION
The cabinet is heavy. Two people are
recommended to level the cabinet.

9
INSTALLATION
Guidelines for final positioning of
your appliance:
• Rest all bottom leveling feet firmly on
a solid floor.
• The cabinet should be level on all sides.
• The door should be level.
Door
Raise
Door Raise
Door
Freezer Hinge
Adjustment
Freezer Refrigerator
Door
Lower Hinge Adjustment for Leveling
the Doors of the Matching Refrigerator /
Freezer Pair
To level the doors using the adjustable
lower hinge (some models):
If the refrigerator door is lower than the
freezer door, raise the refrigerator door
by turning the adjustment screw counter-
clockwise using a 19mm socket wrench.
(See illustration below.)
If the freezer door is lower than the
refrigerator door, raise the freezer door
by turning the adjustment screw counter-
clockwise using a 19mm socket wrench.
(See illustration below.)
WARNING
The anti-tip device must be
installed according to the
instructions in your Use &
Care Manual. Failure to do
so may result in injury.
Setting the anti-tip bracket:
Units are equipped with an anti-tip brack-
et. The anti-tip bracket is located on the
lower front corner of the cabinet, on the
lower hinge bracket. After fully leveling
the unit, lower the anti-tip foot by turning
it clockwise until is securely contacts the
floor. Do not raise the cabinet.
Lower
Anti-tip Bracket Pairing Installation
Pairing kit (TWINSPAIRKIT) is REQUIRED
if you are installing the following
appliances next to each other:
• Freezer and Refrigerator
• Freezer and Freezer
• Refrigerator and Refrigerator
To obtain this kit, please contact the
retailer where you purchased your
appliances, or contact Frigidaire customer
service at 1-800-374-4432 in the US,
1-800-265-8352 in Canada.

10 DOOR REVERSAL
Single Unit Door Swing Reversal:
• Refrigerator: Right-hand to Left-hand Swing order TTDRRVFRKIT
• Freezer: Left-hand to Right-hand Swing order TTDRRVFFKIT
Order the kit on Frigidaire.com or by calling 1-800-374-4432 (Frigidaire.ca or
1-800-265-8352 in Canada).
Right-hand Swing Left-hand Swing
CAUTION
Doors are heavy. Two people are recommended to remove or replace the door
assembly from the cabinet.
Dual Unit Door Reversal:
• Moving the Refrigerator door to the Freezer also changes the left-hand swing to
a right-hand swing.
• Moving the Freezer door to the Refrigerator also changes the right-hand swing to
a left-hand swing.
NOTE
The hinges and associated hardware also need to be transfered in order to switch doors.

11
DOOR REMOVAL
or
or
Tools Necessary:
Socket
Wrench Set
Adjustable
Wrench
5/16"
(8mm)
Fixed
Wrench
Flathead
Screwdriver
and
or
Phillips
TM
Head or
#2 Square
Drive Head
8mm
(M5x16mm)
Hex head screw x3
x2
Door removal:
• Unplug the unit or switch the breaker
that supplies power to the unit to the
o position.
• Remove the plastic top hinge cover.
• Hold the door in place while remov-
ing the top hinge from the cabinet.
• Remove the M5x16 mm hex head
screws from the top hinge with a
wrench or socket.
• Lift the door upwards and pull up
and away from the cabinet until free
of the bottom hinge pin mounted on
the front of the cabinet.
• To replace the door, reverse the above
procedures and securely tighten all
screws to prevent hinge slippage.
IMPORTANT
Before you begin, remove the electrical power cord from the wall outlet. Remove
any food from door bins.
CAUTION
Doors are heavy. Two people are recom-
mended to remove or replace the door
assembly from the cabinet.
CAUTION
The door should be closed prior to
removing or installing

12 DOOR HANDLE INSTALLATION
Door Handle Mounting Instructions
1. Remove handle and any protective
packaging from inside the appliance.
2. Position handle end caps over upper
and lower pre-installed shoulder
bolts (A) that are fastened into door,
ensuring the holes for the set screws
are facing away from the hinge.
3. While holding handle firmly against
door, fasten upper and lower Allen set
screws (B) with supplied Allen wrench.
A
B
CAUTION
Wear gloves and use extreme CAUTION
when installing these handles. The round-
ed end of the handles may be sharp.
NOTE
All set screws should be tightened and
sub-flush (Allen set screw should be
seated just below the surface of the
end cap) of handle end cap. The end
caps should be drawn tight to door
with no gaps.

13
WATER SUPPLY CONNECTION
Before Installing The Water Supply Line,
You Will Need:
• Basic Tools: adjustable wrench,
flat-blade screwdriver, and PhillipsTM
screwdriver
• Access to a household cold water
line with water pressure between 30
and 100 psi.
• A braided stainless steel water supply
line with integral fittings such as Smart
Choice® 5304437642 or ¼" copper
line with compression fittings. The line
must be 6˙ or longer to allow appli-
ance to be moved out for cleaning.
• A shuto valve to connect the water
supply line to your household water
system. DO NOT use a self-piercing
type shuto valve.
• Do not reuse compression fitting or
use thread seal tape.
• A compression nut and ferrule
(sleeve) for connecting a copper
water supply line to the water valve.
CAUTION
To Avoid Property Damage:
• Use Copper or Stainless Steel braid-
ed tubing for the water supply line.
Frigidaire does not recommend wa-
ter supply tubing made of ¼” plastic.
Plastic tubing greatly increases the
potential for water leaks, and the
manufacturer will not be responsible
for any damage if plastic tubing is
used for the supply line.
• DO NOT install water supply tubing
in areas where temperatures fall
below freezing.
WARNING
To avoid electric shock, which can
cause death or severe personal injury,
disconnect the unit from electrical pow-
er source before connecting a water
supply line to the appliance.
NOTE
Ensure that your water supply line
connections comply with all local
plumbing codes.

14 WATER SUPPLY CONNECTION
To Connect Water Supply Line To Water
Inlet Valve
1. Disconnect the refrigerator from
electrical power source.
2. Place the end of the water supply
line into a sink or bucket. Turn ON
the water supply and flush the supply
line until the water is clear. Turn OFF
the water supply at the shuto valve.
3. Remove the plastic cap from the wa-
ter valve inlet and discard the cap.
4. If you use copper tubing - Slide the
brass compression nut, and then
the ferrule (sleeve) onto the water
supply line. Push the water supply
line into the water valve inlet as far
as it will go (¼"/6.4 mm). Slide the
ferrule (sleeve) into the valve inlet
and finger tighten the compression
nut onto the valve. Tighten another
half turn with a wrench; DO NOT
overtighten. See Figure 1.
If you use braided flexible stainless
steel tubing - The nut is already
assembled on the tubing. Slide the
nut onto the valve inlet and finger
tighten the nut onto valve. Tighten
another half turn with a wrench; DO
NOT overtighten. See Figure 2.
APlastic Water Tubing to
Water Dispenser (foamed within
the cabinet)
BSteel Clamp (Fig. 1: ¼"; Fig. 2: ½")
CBrass Compression Nut
DFerrule (Sleeve)
ECopper Water Line
FWater Valve Bracket
GValve Inlet
HWater Valve
ICopper Water Line from
Household Water Supply*
JBraided Flexible Stainless Steel
Water Line
*Include enough tubing in the loop to allow
moving the refrigerator out for cleaning
Figure 1
A
B
C
DE
F
G
H
I
Figure 2
A
C
GF
H
J
B

15
5. With the steel clamp and screw,
secure the water supply line (copper
tubing only) to the rear panel of
refrigerator as shown.
6. Coil the excess water supply line
(copper tubing only), about 2½turns,
behind refrigerator as shown and
arrange coils so they do not vibrate or
wear against any other surface.
7. Turn ON the water supply at shuto
valve and tighten any connections
that leak.
8. Reconnect the appliance to electri-
cal power source.
WATER SUPPLY CONNECTION
NOTE
Check with your local building authori-
ty for recommendations on water lines
and associated materials prior to in-
stalling your new refrigerator. Depend-
ing on your local/state building codes,
Frigidaire recommends for homes with
existing valves its Smart Choice® water
line kit 5305513409 (with a 6�Stain-
less Steel Water Line) and for homes
without an existing valve, Frigidaire
recommends its Smart Choice® water
line kit 5305510264 (with a 20�copper
water line with self-tapping saddle
valve). Please refer to Frigidaire.com for
more information.

16 CONTROLS AND SETTINGS
Cool Down Period
To ensure safe food storage, allow the appliance to operate with the door closed for at
least 8 hours before loading it with food.
Power On
Upon opening the door, the settings icon will illuminate on the control panel.
Appliance Display
123
45 6 7 8 9 1110
By pressing the settings icon, you will illuminate all of the icons on the appliance
control. After 10 seconds of no user interaction with the icons or door closure, all the
icons will fade, except for the settings icon.
The appliance display is located in the cabinet below the upper drawer.

17
CONTROLS AND SETTINGS
Alarms
Controls
DOOR OPEN
This alert indicates the door has been open for 5 minutes or more. The DOOR
OPEN LED will illuminate and the audible alert will sound until the door is closed.
The audible alert can be turned o by pressing the DOOR OPEN key or by clos-
ing the door. If the door is ajar for 5 minutes, the interior light will turn o.
POWER OUTAGE
The POWER OUTAGE indicator light informs you there has been a power inter-
ruption. Reset the alarm by pressing POWER OUTAGE.
HIGH TEMP
If the temperature increases above a safe temperature range, the red HIGH
TEMP LED light will illuminate and the alarm will sound. Reset the alarm by
pressing HIGH TEMP.
1
2
3
The lock button can be used to lock the control panel. Press and hold for 3 sec-
onds to enable. While in the locked state, no changes can be made until unlocked.
Press and hold for 3 seconds to disable.
The settings icon illuminates upon opening the appliance door. Press the set-
tings icon to reveal other function icons. After 10 seconds of non use of icons or
door closure, all icons will fade except the settings icon.
Adjusting Temp
To adjust the temperature setting, press +to raise the temperature and -to
lower the temperature on the appliance control. Allow several hours for the tem-
perature to stabilize between adjustments.
TEMP °F/°C
Short press to toggle between Fahrenheit (°F) and Celsius (°C).
CHILL BOOST
Turning on CHILL BOOST will cool the appliance down to a target temperature
and will remain active for up to 24 hours before automatically deactivating or
being manually exited. To turn the function on/o, press CHILL BOOST. When
you turn o CHILL BOOST, it will automatically reset the refrigerator back to
the previous temperature setting.
AIR FILTERS
The AIR FILTERS replacement alert will illuminate when it is time to replace the
air filters. See the FILTER REPLACEMENT section for instructions on how to
replace the air filters. After changing the air filters, reset the AIR FILTERS alert
by pressing and holding AIR FILTERS.
WATER FILTER
The WATER FILTER replacement alert will illuminate when it is time to replace
the water filter. See the FILTER REPLACEMENT section for instructions on how
to replace the water filter. After changing the water filter, reset the WATER
FILTER alert by pressing and holding WATER FILTER. After replacing the water
filter, see the AUTOMATIC WATER DISPENSER section for instructions on how
to prime the water system.
WATER DISP
The illuminated WATER DISP LED means the internal water dispenser is ON.
Open the internal water dispenser by pushing the push-push nozzle. Press the
water dispenser paddle inside the cabinet to dispense water. Turn the dispenser
o by pressing and holding WATER DISP for 3 seconds. When the water dis-
penser is o, you cannot dispense water. You will hear a beep if you try to press
the paddle without WATER DISP being turned on. Press and hold WATER DISP
to turn it on.
6
4
5
7
9
10
11
8

18
Sabbath Mode
The Sabbath Mode is a feature that disables portions of the appliance and its controls
in accordance with observance of the weekly Sabbath and religious holidays within
the Orthodox Jewish community.
To enter Sabbath Mode
Simultaneously press and hold —and TEMP F/C for 5 seconds.
For further assistance, guidelines of proper usage and a complete list of models
with the Sabbath feature, please visit the web at star-k.org.
The unit stays in Sabbath mode after a power failure recovery. It must be deactivated
with the buttons on the appliance control display.
Sb will appear on the appliance control display indicating that the unit is in Sabbath mode.
CONTROLS AND SETTINGS
NOTE
While in the Sabbath Mode, neither the lights nor the appliance control display will
work (except to exit Sabbath Mode) until Sabbath Mode is deactivated.
The appliance stays in Sabbath Mode after power failure recovery. You must deacti-
vate it with the buttons on the appliance control display.

19
CONTROLS AND SETTINGS
To exit Sabbath Mode
Simultaneously press and hold —and TEMP F/C for 5 seconds.
The appliance control display will show all of the icons.
In the Sabbath mode, the HIGH TEMP alarm is active for health reasons. For example,
if you leave the door ajar, the HIGH TEMP alarm is activated. The refrigerator will
function normally once you close the door, without any violation of the Sabbath/
holidays. The HIGH TEMP alarm comes on when the cabinet temperature is outside
the safe zone for 20 minutes. The alarm silences itself after 10 minutes while the HIGH
TEMP icon stays lit until you exit the Sabbath mode.
All buttons are disabled, and all sounds (except the HIGH TEMP alert*) are muted.
Only the HIGH TEMP alert will illuminate until you deactivate the Sabbath Mode.

20 AUTOMATIC WATER DISPENSER
Your refrigerator is equipped with an
internal water dispenser mounted inside the
cabinet, along the left-hand cabinet wall.
Before using the water dispenser for the
first time or after changing the water filter,
you must prime your water supply system.
The water nozzle inside the cabinet allows
the water nozzle (A) to be recessed
against cabinet when not in use and to
be extended outward when in use. To
use the water dispenser, push the water
nozzle (A) so it is fully extended. Place a
cup against the paddle (B) and press to
dispense water.
A
B
Water Dispenser
On
Water Dispenser
O
Priming the water supply system
Using the dispenser after installation:
If the system is not flushed, the first glass
of water may have discolored water or
have an odd flavor.
1. Begin filling the system by pressing
a drinking glass against the water
dispenser paddle.
2. Keep the glass in this position
until the water comes out of the
dispenser. It may take about 1½
minutes.
3. Continue dispensing water for
about 4 minutes to flush the system
and plumbing connections of any
impurities (stopping to empty the
glass as necessary).
If the water dispenser function becomes
disabled, enable the water dispenser by
pressing and holding WATER DISP on the
appliance control display. When the water
dispenser is turned on, the LEDs above
WATER DISP are illuminated.
NOTE
Optional: Lock the water dispenser
back in place by pushing the water
nozzle back in when you have finished
dispensing water.
NOTE
If you prefer to keep the internal water
dispenser disabled, use the appliance
display to disable it. The LEDs will not
be illuminated above WATER DISP.
CAUTION
For proper dispenser operation, the
recommended water supply pressure
should fall between 30 psi and 100
psi. Excessive pressure may cause the
system to malfunction.