FROST 622 Owner's manual

Specification Information
Frost Products Ltd
5276 John Lucas Drive [phone] [e-mail]
Burlington, ON, Canada, L7L5Z9 1-800 667-5094 www.Frostproductsltd.com
Product Code: 622
Product Name: Surface Mounted Feminine Product Disposal
Individual Carton UPC: 624622622008
Individual Carton Shipping Dimensions: 20.3cm W x 33.6cm H x 11.4cm D (8″W x 13¼″H x 4½″D)
Individual Carton Shipping Weight: 1.8kg (4 lbs)
Site Location: Frost’s 622 surface mounted napkin disposal is practical, durable, and easy to maintain. This economical
surface mounted unit provides flexible mounting and ease of maintenance for partition panel systems or any type of
wall construction. Typically, these units are used in schools, malls, hospitals, office buildings, recreational facilities, and
other commercial properties. The ease of use, durable construction, and low maintenance of this product make it a
popular choice.
Features:
•Canadian made with 22 gauge stainless steel
•Pivoting self-closing lid
•French/English napkin disposal label is embossed on lid
•Pivoting door utilizes full length piano hinge
•Easy to clean and maintain
Capacity:
•6 litres (1.6 US gal., 1.3 Imp gal.)
Materials:
•All welded stainless steel construction (22 gauge)
•Brushed stainless steel finish
Product Dimensions:
•20.1cm W x 32.8cm H x 11.4cm D (7.9″W x 12.9″H x 4.5″D)
Product Weight:
•1.7kg (3.75 lbs)

Specification Information
Frost Products Ltd
5276 John Lucas Drive [phone] [e-mail]
Burlington, ON, Canada, L7L5Z9 1-800 667-5094 www.Frostproductsltd.com
Installation Guidelines: Position cabinet 66cm (26″) from floor. Secure to wall using mounting holes and screws
provided. For barrier free mounting ensure that top of unit does not exceed 120 cm (48″) above floor level. Unit comes
with standard combination style screws. Mark mounting holes against the mounting surface using a pencil and level. Use
a screwdriver or power drill to drill screws in the desired mounting surface and attach the disposal. Please note that it is
recommended that all installations be conducted by a qualified tradesperson. Failure to do so may result in serious
injury. Please read and follow any additional installation guidelines provided with the products.
Maintenance: Normal preventative maintenance and cleaning will keep Frost products functioning properly and may
extend normal product life. Products should be wiped down with a damp soft cloth periodically. Approved stainless steel
cleaner may be used to clean scuffs or fingerprints on stainless surfaces. Do not use harsh detergents or chemical
cleaners. For general dirt and blemishes on painted steel or plastic use warm water and mild soap, or a general mild
cleaning solution. When using any type of cleaning solution, spray onto a discrete area to test before full usage. After
the cleaning agent is applied, wipe off with a clean soft cloth or sponge. For stainless steel please do not spray with any
product containing bleach, acids, or chlorides, which can be found in many cleaning products such as toilet bowl
cleaners. Use of these cleaning solutions may cause discolouration and if used for prolonged periods of time they can
eat away at points in the stainless steel. If discolouration occurs, the use of an approved stainless steel cleaner and a
firmer scrub pad, such as a Scotch Brite Pad #7447, may remove the markings. Wipe away any debris from the area and
gently rub with the pad. Then spray the area with a stainless steel cleaner/polish and rinse and dry. Always wipe with
the grain direction for stainless steel products. If a cleaning agent has begun to eat away at the steel on a unit then the
unit will likely need to be replaced. The stainless steel that Frost Products uses is of high quality and stainless steel is
resistant to rust. However, discolouration that appears to be rust can be caused by cleaning solutions and soaps
mentioned above. It is important to discontinue use of any cleaning agent or soap if discolouration begins to occur.
Clean off the discolouration as quickly as possible to avoid any permanent damage to the unit. Maintenance staff should
be taught how to recognize the signs that they are not using the appropriate cleaning products and how to correctly
maintain stainless steel items.
Warranty: If any product or part proves to be defective within 12 months from date of shipment from the factory it will
be repaired or replaced without any charge including freight costs when authorized. Costs resulting from the installation
or removal of defective products are not covered under this warranty. Discolouration to stainless steel parts resulting
from exposure to harsh environmental and / or chemicals are not considered to be defects in workmanship or material
and are not covered under warranty.