FSL Scoreboards M01 User manual

M01

M02 without Clock
1)
Scoreboard connections:
•
The scoreboard should be supplied with a 230V mains supply.
•
The mains supply should be fed through
and it is highly recommended that the supply should be fed through
a Residual Current Device (RCD)
•
If the scoreboard has been supplied with a separate aerial this
should be mounted as high as possible
2) On Power Up
•'Cd - ' will
be displayed for 5 second
o
This is a "code" number stored in memory
o
There are 5 possible codes that may be used, this
allows a number of displays to be operated in close
proximity of each other
o
Further details on programming the code can be
found at the e
•The scoreboard wi
ll now go into normal operation, displaying
scores with the clock blanked.
Scoreboard connections:
The scoreboard should be supplied with a 230V mains supply.
The mains supply should be fed through
a
5 amp circuit breaker
and it is highly recommended that the supply should be fed through
a Residual Current Device (RCD)
If the scoreboard has been supplied with a separate aerial this
should be mounted as high as possible
2) On Power Up
:
be displayed for 5 second
s
This is a "code" number stored in memory
There are 5 possible codes that may be used, this
allows a number of displays to be operated in close
proximity of each other
Further details on programming the code can be
found at the e
nd of the manual
ll now go into normal operation, displaying
scores with the clock blanked.
Page 2 of 8
The scoreboard should be supplied with a 230V mains supply.
5 amp circuit breaker
and it is highly recommended that the supply should be fed through
If the scoreboard has been supplied with a separate aerial this
This is a "code" number stored in memory
There are 5 possible codes that may be used, this
allows a number of displays to be operated in close
Further details on programming the code can be
ll now go into normal operation, displaying

M02 without Clock
3) Changing Scores
1.
To increase the score press the
button
2.
To decrease the score press the
3) Changing Scores
:
To increase the score press the
To decrease the score press the
button
Page 3 of 8

M02 without Clock
3.
To clear the score press the
button together
To clear the score press the
&
Page 4 of 8

M02 without Clock
4) Brightness Setting
•To access brig
htness setting, hold buttons
handset together
for 3 seconds until 'bl
•To exit brig
htness setting, hold buttons
handset together
for 3 seconds until
4) Brightness Setting
:
htness setting, hold buttons
&
for 3 seconds until 'bl
-
' is displayed
htness setting, hold buttons
&
for 3 seconds until
the
scores are displayed again
Page 5 of 8
on the
' is displayed
on the
scores are displayed again

M02 without Clock
Increasing
Brightness:
•While 'bl -
' is displayed
•
The maximum brightness is 9
Decreasing
Brightness:
•While 'bl -
' is displayed
•
The minimum brightness is 0
•
To exit brightness setting, hold buttons
handset together for 3 seconds until
Brightness:
' is displayed
,
increase brightness with button
The maximum brightness is 9
Brightness:
' is displayed
, de
crease brightness with button
The minimum brightness is 0
To exit brightness setting, hold buttons
&
handset together for 3 seconds until
the scores are
displayed
Page 6 of 8
increase brightness with button
crease brightness with button
on the
displayed
again

M02 without Clock
•
6) Scoreboard B ank:
6) Scoreboard B ank:
Page 7 of 8

M02 without Clock
FSL ELECTRONICS LTD
SANDHOLES ROAD
COOKSTOWN
CO TYRONE
N. IRELAND
BT80 9AR
[phone]
www.fslelectronics
Page 8 of 8