Polanik ST-5x4 User manual

ASSEMBLY MANUAL
Modular grid platforms
ST-5x4
ST-6x5
ST-7x5
ST-8 5x6
ST-9x7
File: 2014-07-18
PRODUCT SUPPORT
Pawel Ciechanowski
p.ciechanowski polanik.com

Assembly manual platform type ST 2/8
Thank you for choosing Polanik modular grid platforms.
Contents
Chapter Page
I. General description and use 2
II. Parts list 2
III. Assembly 2
IV. Maintenance 3
V. Platform cart WSZG-30 (option) 3
VI. Assembly plans 4
ST-5x4 4
ST-6x5 5
ST-7x5 6
ST-8,5x6 7
ST-9x7 8
I. General description and use
Modular grid characteristics:
•innovative construction – small and light modules, which are easy to transport and position in situ, take little
storage space,
•high durability and quality – all grid elements are made of galvanized steel, universal elements can be used to
form other platforms of different dimensions,
•easy operating – very quick assembly and disassembly processes done by two people take approx. 30 minutes.
II. Parts list
The quantity and types of the elements which form the platforms are described in the respective assembly plans. The
standard platform element (1 m x 1 m) marked in the plans as element “0”is not labelled. The remaining element types
are labelled with numbers which correspond to the markings in the plans.
III. Assembly
The assembly is done according to the assembly plans included in this manual. You do not need to prepare any
special tools to assemble the modular grid platform. However it is recommended that you should have a
measuring tape at hand to position the first row before the pole vault box. The elements in front of the rear side of
the pole vault box should be positioned in the distance of 250 mm (see the assembly plans). Next the steel guards
(1 or 2 depending upon the platform model) are put on the elements (see the drawing below). The steel guards
prevent the vaulting pole from going under the platform.

Assembly manual platform type ST 3/8
IV. Maintenance
During longer idle periods the grid must be disassembled and stored indoors. Periodical inspections should be executed
after every athletics season. Any revealed damages ought to be protected with anticorrosive paint.
V. Platform cart WSZG-30 (option)
We recommend using Polanik cart WSZG-30 available as an option (apart from ST-9x7 and ST-8,5x6 which come with 2
carts) for transporting and storing the platform. Since the cart is equipped with a universal platform (100 cm x 92,5 cm)
and a handy container, it can be used for other purposes.
Even the best technical solutions cannot substitute for common sense. Operating sports equipment should be taken place
under qualified staff supervision. The producer shall not be liable for any incidents caused by improper assembly or
misuse.
Grid platform elements are installed on linking feet. Each foot has got 4 cut-outs by means of which you can link 4
element corners together (see images below).
If you have linked all the base elements you can start to install railings which secure the landing area on the
platform. The railings are also slid into linking feet. They are installed on the right, the left and at the back of the
platform.

Assembly manual platform type ST 4/8
V. Assembly plans

Assembly manual platform type ST 5/8

Assembly manual platform type ST 6/8

Assembly manual platform type ST 7/8
Zawiera 2 wózki WSZG-30 w standardzie. Comes with 2 platform carts WSZG-30.

Assembly manual platform type ST 8/8
Zawiera 2 wózki WSZG-30 w standardzie. Comes with 2 platform carts WSZG-30.