Triumph Sports USA 45-6080 User manual

Item# 45-6080
18” Basketball - Door Court
If you have any problems with your new product,
DO NOT RETURN IT TO THE STORE!
Please contact us at 1-866-815-4173,
or e-mail us at [email protected]

STOP PLEASE KEEP YOUR INSTRUCTIONS!
Your Item number is necessary when you need to contact us. If you have any problems with
your new product, DO NOT RETURN IT TO THE STORE! Please contact us at 1-866-815-4173,
or e-mail us at [email protected]
Please read through this instruction book to familiarize yourself with any assembly steps and/or
rules.
Triumph Sports USA
West Allis, WI 53227
www.triumphsportsusa.com
©2011 Triumph Sports USA. All Rights Reserved.
90-Day TSU Game Warranty
All TSU games have a 90-days from date of purchase warranty. This warrants the retail purchaser for any TSU games
purchased to be free from any defects in materials and construction for 90 days from the date of purchase. Normal
play wear and usage is not covered under the warranty, nor is wear or damage due to improper use of the TSU game.
This will void any and all TSU warranty.
Be sure to check out all the exciting games has to offer.
Visit our web site at:
www.triumphsportsusa.com
BILLIARDSDARTSGAME TABLESCASINO OUTDOOR GAMES DARTBOARDS

1
45-6080 CAN PARTS LIST
Main Board
1 Piece
Metal Support
1 Piece
Plastic Bolt
2 Pieces
M4 Nut
4 Pieces
1/4” Nut
2 Pieces
Basketball
1 Piece
1/4” x 3/8” Bolt
2 Pieces
Hook
2 Pieces
Rim
1 Piece
Adjust Screw
2 Pieces
Plastic Nut
2 Pieces
Allen Wrench
1 Piece
Net
1 Piece
23451
6 7 8 9 10
11 12 13 14
ASSEMBLY INSTRUCTIONS
Inflation Pump
with Needle
1 Piece
#1
#3
#4
#8
#6
#9
FIG.1
1. Open the carton of your new Basketball Game near where you will play. Remove all the parts from inside the
carton and verify that you have all listed parts as shown on the Parts List.
2. Screw the Adjust Screws (#8) into the Hook (#6) using Plastic Nut (#9).
3. Attach the Hook (Pre-assembled) to the Main Board (#1) using two Plastic Bolts (#3) and four Nuts (#4).
FIG. 1
FIG. 1A
NOTE: In the event you are unable to close your door,
remove Part #8 (adjustment screw).

2
#7
#7
#5
#2
#11
FIG.2
4. Attach the Rim (#7) to the Main Board (#1) using two Bolts (#5), one Metal Support (#2) and two Nuts (#11).
FIG.3
5. Install the Net (#10) to the Rim (#7).
YOU ARE NOW READY TO PLAY!
#10
A
B
C
FIG. 2
FIG. 3