FSN MSV 2 User manual

FSN2016 – 9/2019
1
4K Multi Scaler Viewer
MSV 2
User’s Guide
Before connecting, operating or adjusting this product, please
read this instruction booklet carefully and completely.

FSN2016 – 9/2019
2
Table of Contents
1. Introduction ............................................................................................................................ 3
2. Description............................................................................................................................. 8
3. Quick Start ............................................................................................................................. 8
4. Starting Guide and Basic Functions ....................................................................................... 9
5. MSV2 Function .................................................................................................................... 13
6. MSV2 Web Controller .......................................................................................................... 17
7. MSV2 OSD .......................................................................................................................... 65
8. API....................................................................................................................................... 79

FSN2016 – 9/2019
3
Introduction
The MSV2 (Multi Scaler Viewer2) is 4K Multi Scaler Viewer which is an advanced video processor for
multimedia presentations. It is an ideal solution for applications where up to four different or same video
signals must be displayed on a single display. MSV2 allows you to manipulate output images, wherever
positions and whatever size you want for display and also allows you to control brightness, overlay, etc.
The embedded scaler converts the input images to match the output settings that you can select (up to
4K (4096x2160). MSV2 can be easily controlled through various methods such as web controller, front
panel controller (OSD) and RS-232 .
Main function:
- A four-channel input image signal is output from one display equipment.
- Downscaling and upscaling each input image signal to the output image resolution
Input features:
-Various input resolutions
Output features:
- Selectable output resolution
- Crop settings for each input
- Each window size and location can be readjusted.
- Window labeling, Border (Timeout/On/Off)
- Function of Overlay and Copy
- 1 audio output signal of 4 input signals can be selected
- Brightness and Contrast can be set.
- Available to save user-defined Preset layout
Application for OPHIT MSV2
Professional broadcasting and production studios
Medical Center and laboratory
Presentation application
Display application
We recommend that you:
Unpack the equipment carefully and save the original box and packaging materials for possible future
shipment
Review the contents of this user manual
Use only Power Adapter supplied by OPHIT

FSN2016 – 9/2019
4
1.1Specification
1.1.1 Power specification
Items Values / Description
AC/DC adaptor 12V DC, 3.33A
Total power consumption
(on 4 inputs operation) 25.2W (12V DC, 2.1A)
1.1.2 Video input specification
Items Values / Description
Port type HDMI x 2
HDMI / DisplayPort x 2 (selectable)
Resolutions 4096 x 2160p @60Hz (maximum)
Signal formats HDMI, DP
For more details on the video input resolutions refer to the document, MSV2 specification.
1.1.3 Video output specification
Items
Values / Description
Port type HDMI x 1
Resolutions 4096 x 2160p @60Hz (maximum)
Signal format HDMI
For more details on the video output resolutions refer to the document, MSV2 specification or chapter
5.4.

FSN2016 – 9/2019
5
1.1.4 Input/output port pin assignment
HDMI Connector
Pin Signal Assignment Pin Signal Assignment Pin Signal Assignment
1TMDS DATA2+ 9TMDS DATA0- 17 DDC
2TMDS DATA2 SHIELD 10 TMDS CLOKE+ 18 +5V
3TMDS DATA2- 11 TMDS CLOKE SHIELD 19 HPD
4TMDS DATA1+ 12 TMDS CLOKE-
5TMDS DATA1 SHIELD 13 CEC
6TMDS DATA1- 14 HEAC
7TMDS DATA0+ 15 SCL
8TMDS DATA0 SHIELD 16 SDA
Display Connector
Pin
Signal Assignment
Pin
Signal Assignment
1 Main Link Lane 0 (Positive) 11 Ground
2 Ground 12 Main Link Lane 3 (Negative)
3 Main Link Lane 0 (Negative) 13 Config1 (Ground)
4 Main Link Lane 1 (Positive) 14 Config2 (Ground)
5 Ground 15 AUX Channel (Positive)
6 Main Link Lane 1 (Negative) 16 Ground
7 Main Link Lane 2 (Positive) 17 AUX Channel (Negative)
8 Ground 18 Hot Plug
9 Main Link Lane 2 (Negative) 19 Return
10 Main Link Lane 3 (Positive) 20 DP_PWR (+3.3V input)

FSN2016 – 9/2019
6
1.1.5 Mechanical Specification
-MSV2 case construction features
Button: Power, Menu, Move, Resize, Resolution, Left/Right/Up/Down, OK, 8 display type
buttons.
Input video: 2 HDMI Connecters + 2 HDMI/DisplayPort Connectors (Selectable).
Output video: 1 HDMI Connector.
Size : 436(W) x 44(D) X 213(H) mm
Color : Black, Ivory

FSN2016 – 9/2019
7

FSN2016 – 9/2019
8
2. Description
Hardware Software
HDMI input port 2ea MSV2 controller(Web)
HDMI/DisplayPort input port 2ea(selectable) OSD
Front panel User console
[Table 1] MSV2 Hardware & Software
Hardware
- MSV2 can receive two HDMI inputs and two HDMI/DisplayPort inputs (optional).
- Front panel allows you to change layout presets, move, resize functions, and OSD operation.
Software
- MSV2 operation is possible by utilizing MSV2 Web controller, On Screen Display (OSD), and User
console.
1) OSD is operated by front panel.
2) Web Controller supports all operation functions of MSV2.
3) The User Console can be operated via the RS232 cable (Basic operation functions only)
3. Quick Start
The MSV2 (Multi Scaler Viewer2) is 4K Multi Scaler Viewer which is an advanced video processor for
multimedia presentations. It is an ideal solution for applications where up to four different or same video
signals must be displayed on a single display. MSV2 allows you to manipulate output images, wherever
positions and whatever size you want for display and also allows you to control brightness, overlay, etc.
The embedded scaler converts the input images to match the output settings that you can select (up to
4K (4096x2160). MSV2 can be easily controlled through various methods such as web controller, front
panel controller and RS-232.

FSN2016 – 9/2019
9
[Figure 1] MSV2 System Application
Operate in quad mode unless there is a separate operation using MSV2 Web Controller, OSD, User
Console, etc. You can operate MSV2 by Quick Start Flow as below.
MSV2 Quick Start Flow
1. Connect source device/devices to MSV input port (HDMI /DisplayPort)
2. Connect display device to MSV output port(HDMI)
3. Connect power adapter on MSV
4. Turn the MSV power switch On (on the rear panel)
5. Press MSV power button (on the front panel)
[Table 2] MSV2 Quick Start Flow
4. Starting Guide and Basic Functions
MSV2 can be controlled by OSD, Web controller and user console (RS-232) but basic functions can be
operated by front panel without OSD and Web controller. In this chapter we will see the basic functions of
MSV. Please refer to other chapters for using of OSD and Web controller.

FSN2016 – 9/2019
10
4.1MSV2 Front Panel Description
Power: Power On/Off button.
LEDs
CH 1~4 LED: Input signal is detected, for each channel led is illuminated
ACTIVE LED: If MSV2 is operating normally, this LED will flash.
NETWORK LED: If the network connection is normal, the LED will illuminate. If this LED is not lit, you
will not be able to access the Web Controller.
Function buttons
MOVE: Enables window position setting mode.
RESIZE: Enables window size setting mode.
RESOLUTION: Opens a banner that allows you to view the current resolution. Before the banner
disappears (Timeout: 5 sec) Pressing the button again sets the next output
resolution.
MENU: Place the OSD on or off the screen
OK: Enter/Select.
Navigation buttons: Select or move the OSD menu. This controls window movement and sizing when
activating Move and Resize functions.
Layout preset buttons: This button allows you to select Layout mode. The selected button LED is
illuminated. When controlling the Move and Resize function, it is possible to
use the User button while it is active. Use the buttons 1 to 4 to select the
channel you want to control.
When Move, Resize is selected, the button LED turns on to indicate that it is active. To deactivate,
press the button again or press the Move or Resize button. Pressing another function button activates
the newly pressed function.