FujiFilm FinePix E 500 User manual

Gold marking
E500/
E500/
E510
E510
FGS-406106-FG
BL00403-200(1) E
A. Loading the batteries
1.Check that the camera is
turned off (viewfinder
lamp is off) before
opening the battery cover.
1Hold down the Battery
cover lock release
button.
2Open the battery
cover.
2.Load the batteries
correctly as shown left.
1.Align the gold mark on the
xD-Picture Card slot with
the gold contact area on
the xD-Picture Card and
then push the card firmly
all the way into the slot.
3.Press the “POWER”
button to turn the camera
on. When turning the
camera on, the viewfinder
lamp lights green.
B. Setting up the camera
1
2.Close the battery cover.
2
1
2
C. Taking a picture
Bebeep
Click
1.Set the Mode switch to “q”.
2.Press the shutter button down half
way to adjust the focus.
3.
Press the shutter button down fully to
take a picture. The camera makes a
“Click” sound and takes the picture.
D. Viewing a picture
1.Set the Mode switch to
“w”.
2.Press the “d” or “c” to
move through your
images.
4.You can select your
preferred date format.
Press “d” or “c” to select
the date order, Year,
Month, Day, Hour or
Minute.
Press “a” or “b” to correct
the setting.
Press the “MENU/OK”
button after you complete
the setting.
*Refer to owner’s manual
for date/time setup.
1
2 3
Camera Controls
Picture Taking
Refer to Owner’s Manual for more detailed instructions
Still images that can be viewed on the FinePix E500/FinePix E510
You can use this camera to view still images recorded on the FinePix
E500/FinePix E510 or still images (excluding some uncompressed
images) recorded on a FUJIFILM digital camera that supports xD-
Picture Card.
Flash control sensor
Flash
Speaker
Microphone
Viewfinder window
Adapter ring release
button
Shutter button
Self-timer lamp
Lens (Lens cover)
Auto
Programmed Auto
Manual
Portrait
Landscape
Sports
Night scene
Aperture-priority Auto
Shutter-priority Auto
Movie
Mode dial
DC IN 3V (power input)
socket
(USB) socket
Cradle connection
socket
A/V OUT (Audio /
Visual output) socket
Power button
Terminal cover
Photography mode
Playback mode
Mode switch
W(Wide zoom) button
BACK button
DISP (Display) button
Battery cover
Battery cover lock release button
MENU/OK button
4-direction (abdc) button
T(Tele zoom) button
Strap mount
Viewfinder lamp
Viewfinder
Exposure
compensation button
Tripod mount
LCD monitor
xD-Picture Card slot
Battery compartment
Photo mode ( ) button
d/ (Macro) button
c/ (Flash) button
Flash pop-up button
4
ＹＹＹＹＹＹＹ．Ｙ．ＭＭ．ＤＤＤＤ
２００４２００４ １ ． １ １ ． １
ＳＥＴＳＥＴ ＣＡＮＣＥＬＣＡＮＣＥＬ
ＤＡＴＥ／ＴＩＭＥＤＡＴＥ／ＴＩＭＥ
１２ ： ００ ＡＭ１２ ： ００ ＡＭ
0102
3
1 2

USB
socket PC
A.Install Software
A.Install Software
B.Connect a Camera to PC
B.Connect a Camera to PC
C.Save Images
C.Save Images
Viewing images on your PC
A. Install Software
Do not connect the camera to your PC until the software
installation is completed.
1.Turn on your PC and start up Windows.
●
! Users of Windows 2000 Professional or Windows XP should log in
by using a system administrator account (e.g. “Administrator”).
2.Quit all other active applications until no applications are
shown in the taskbar.
3.Load the enclosed CD-ROM into the CD-ROM drive. The
installer starts up automatically.
4.The Setup screen appears.
Click the [Installing FinePixViewer] button.
5.After installation completed, press [Restart] button.
B. Connect the Camera to your PC
1.Load an xD-Picture Card containing photographed
images into your camera.
2.Set the “USB MODE” setting in the “SET-UP” menu to
digital camera “¶”. (Refer to “USING THE SET-UP
SCREEN” in the owner’s manual.)
C. Save Images
1.The Save image Wizard starts up. Click the [NEXT]
button.
2.Check that the files are downloaded from the camera to
your PC and that a folder with the date is created.
Ex. \My Documents \ My Pictures \ 2004_0312 Image
D. View Images
1.Click the [Show List of Images]
button.
2.Select “Preview” in the View menu to display an enlarged
image.
3.Turn your camera off.
4.If you have one, plug the AC power adapter connector
into the “DC IN 3V” socket on the camera and then plug
the adapter itself into the main power outlet, otherwise be
sure your battery is fresh and charged.
5.Use the USB cable (included) to connect the camera to
your PC.
6.Turn the camera on.
7.
FinePixViewer starts up automatically.
Windows 98/98 SE/Me/2000 Professional
q The “Found New Hardware” help message appears in
the bottom-right corner of your screen. This message
will close when the settings are completed. No action
is required.
w Specify the settings in the “AutoPlay” dialog box.
e Select “Viewing images using FinePixViewer” and
then select the “Always do the selected action”
checkbox.
Windows XP
r Click the [OK] button to launch FinePixViewer.
For more information
Refer to “How to use FinePixViewer” in the HELP menu, or chapter 5
and 6 in the Owner’s Manual, or visit Fujifilm “Q&A Search” in the
following website.
(http://home.fujifilm.com/products/digital/ )
For Macintosh users, refer to chapter 5 and 6 in the Owner’s Manual.
Camera
AC-3V
(Sold separately)
(USB) socket
１２
3
４
ＦＲＡＭＥ ＮＯ． ：ＣＯＮＴ．ＦＲＡＭＥ ＮＯ． ：ＣＯＮＴ．
ＵＳＢ ＭＯＤＥＵＳＢ ＭＯＤＥ
言語言語 ／ＬＡＮＧ． ：ＥＮＧＬＩＳＨ／ＬＡＮＧ． ：ＥＮＧＬＩＳＨ
ＳＥＴ−ＵＰＳＥＴ−ＵＰ
ＳＴＡＲＴ−ＩＭＡＧＥ ：ＯＦＦＳＴＡＲＴ−ＩＭＡＧＥ ：ＯＦＦ
ＳＥＴＳＥＴ ＣＡＮＣＥＬＣＡＮＣＥＬ