FujiFilm FinePix F470 User manual

Battery release catch
Battery release catch
Battery release catch
Indicators
Indicators
Indicators
F470
F470
1AG6P1P2955-- FPT-507112
BL00534-200(1) E
B. Loading the battery
A. Charging the battery
1. Plug the Battery Charger BC-
40 (included) into the power
outlet using the connection
cord.
2. Load the battery into the
Battery Charger BC-40
correctly as indicated by the
polarity icon to start
charging. Charging ends
after about 90 minutes and
the charging lamp turns off.
Unplug the battery charger
from the power outlet when it
is not in use.
Hold the battery so that the indicators are aligned before
loading the battery. Push the battery release catch aside while
loading the battery.
1. Press the “POWER” button
to turn the camera on.
Charging lamp
NP-40N
C. Setting up the camera
D. Taking pictures
Bebeep
Click
1. Set the Mode switch to “B”.
2. Press the shutter button down halfway
to adjust the focus.
3. Press the shutter button down fully to
take a picture. The camera makes a
“Click” sound and takes the picture.
E. Viewing pictures
1. Press the “w” button.
2. Press “d” or “c” to move
through your images.
1
2 3
Shutter button
Self-timer lamp
Lens (lens cover)
Speaker
Indicator lamp
Microphone
(Playback) button
W(Wide zoom) button
Flash
DISP (Display) /
BACK button
Battery cover
MENU/OK button
T(Tele zoom) button
Strap mount
Tripod mount
LCD monitor
Photo mode( ) button
POWER button
Auto
Scene position
Movie
Mode switch
4-direction (abdc) button
Photography mode
d/ (Macro) button
c/ (Flash) button
a/ (Low light view) button
b/ (Self-timer) button
Playback mode
a/ (Erase) button
DC IN 5V
(power input) socket
Terminal cover
USB socket
A/V OUT (audio /
visual output) socket
Battery compartment
Battery release
catch
xD-Picture Card slot
PUSH TO EJECT
Camera Controls
Picture Taking
Refer to Owner’s Manual for more detailed instructions
Still images that can be viewed on FinePix F470
You can use this camera to view still images recorded on FinePix
F470 or still images (excluding some uncompressed images) recorded
on a FUJIFILM digital camera that supports xD-Picture Card.
22. You can select your preferred
date format.
Press “d” or “c” to select the
date format, Year, Month,
Day, Hour or Minute.
Press “a” or “b” to correct the
setting.
Press the “MENU/OK” button
after you complete the setting.
✽Refer to owner’s manual for
date/time setup.
1 2
SETS E T CANCELC A N C E L
2008
2007
2005
2004
YY.MM.DDY Y. M M . D D
2006 0021 :
11 .
AMA M
DATE/TIMED AT E / T I M E
1
2
1
FinePix F470 has internal memory that can store images without
xD-Picture Card. Use an xD-Picture Card (sold separately)
when recording a large number of images.

USB socket
Viewing images on your PC
A. Install Software
Do not connect the camera to your PC until the software
installation is completed.
1. Turn on your PC and start up Windows.
●
! Users of Windows 2000 Professional or Windows XP should log in
by using a system administrator account (e.g. “Administrator”).
2. Quit all other active applications until no applications are
shown in the taskbar.
3. Load the enclosed CD-ROM into the CD-ROM drive. The
installer starts up automatically.
4. The Setup screen appears.
Click the [Installing
FinePixViewer] button.
5. After installation completed, press [Close] button.
B. Connect the Camera to your PC
C. Save Images
1. The Save image Wizard starts up. Click the [Start]button.
2. Check that the files are downloaded from the camera to your
PC and that a folder with the date is created.
Ex. \My Documents \ My Pictures \ 2006_0224
D. View Images
1. Click the [Show List of Images]
button.
2. Select “Preview” in the View menu to display an enlarged image.
8.
FinePixViewer starts up automatically.
Windows 98/98 SE/Me/2000 Professional
The “Found New Hardware” help message appears in the
bottom-right corner of your screen. This message will close
when the settings are completed. No action is required.
FinePixViewer starts up automatically.
Windows XP
For more information
Refer to “How to use FinePixViewer” in the HELP menu, or chapter 5
and 6 in the Owner’s Manual, or visit Fujifilm “Q&A Search” in the
following website.
(http://home.fujifilm.com/products/digital/ )
For Macintosh users, refer to chapter 5 and 6 in the Owner’s Manual.
3. Turn your camera off.
4. If you have one, plug the AC power adapter connector into
the “DC IN 5V” socket on the camera and then plug the
adapter itself into the main power outlet, otherwise be sure
your battery is fresh and charged.
5. Turn your PC on.
6. Connect the camera to the PC using the USB cable
(included).
1. Load an xD-Picture Card containing photographed images
into your camera.
2. Press the “w” button for about 1 second to turn the camera
on in Playback mode.
Select “¶” DSC in “ò” USB MODE in the “˜” SET-UP
menu (Refer to “USING THE SET-UP SCREEN” in the
owner’s manual).
7. Press the “w” button for about 1 second to turn the camera
on in Playback mode.
DSCD S C
ENGLISHE N G L I S H
OKO K
NTSCN T S C
:
:
:
:
1
3
2
PCCamera
A.Install Software
A.Install Software
B.Connect a Camera to PC
B.Connect a Camera to PC
C.Save Images
C.Save Images