FujiFilm FinePix S5200 User manual

Gold
contact
area
Gold marking
S5200/
S5200/
S5600
S5600
FPT-507107-PW
BL00485-200(1) E
A. Loading the batteries
1. Check that the camera is
turned off (set the Power
switch to “OFF”) before
opening the battery cover.
2. Load the batteries correctly
as indicated by the polarity
icons.
Press on the battery cover to
push the batteries down.
Slide the battery cover closed.
1. Align the gold marking on the
xD-Picture Card slot with the
gold contact area on the xD-
Picture Card™and push the
card firmly all the way into
the slot.
Close the slot cover.
B. Setting up the camera
1
2. To turn the camera on, set
the Power switch to “q” or
“w”.
Press the “MENU/OK” button
to set the date and time.
1
2
D. Viewing picture
1. Set the Power switch to “w”.
2. Press “d” or “c” to move
through your images.
Camera Controls
Picture Taking
Refer to Owner’s Manual for more detailed instructions
Still images that can be viewed on the FinePix S5200/FinePix S5600
You can use this camera to view still images recorded on the FinePix
S5200 / FinePix S5600 or still images (excluding some
uncompressed images) recorded on a FUJIFILM digital camera that
supports xD-Picture Card.
Exposure
compensation
button
Focus mode
selector button
Continuous
shooting
button
Shutter button
Focus mode
selector lock
switch
Mode dial
Still photography
Movie recording
Power switch
Playback mode
Power-OFF
Photography mode
Auto Programmed Auto
Manual
Anti-blur
Aperture-priority Auto
Shutter-priority Auto
Movie
Natural light
Night
Portrait
Landscape
Strap mount
Slot cover
USB socket (mini-B)
DC IN 5V (power input)
socket
A/V OUT (Audio /
Visual output) socket
Microphone
Flash
AF-assist
illuminator
Self-timer lamp
Speaker xD-Picture Card slot
Lens
W(Wide zoom) button
Photo mode ( ) button
DISP/BACK button
Low light view
button
Battery cover
MENU/OK button
4-direction (abd c) button
T(Tele zoom) button
Strap mount
Viewfinder (EVF)
Diopter adjustment dial
EVF/LCD
(monitor selector) button
Tr ipod mount
LCD monitor
Indicator lamp
d/ Macro button
c/ Flash button
Playback modePhotography mode
a/ Erase button
2
33. You can select your preferred
date format.
Press “d” or “c” to select the
date format, Year, Month,
Day, Hour or Minute.
Press “a” or “b” to correct the
setting.
Press the “MENU/OK” button
after you complete the setting.
✽Refer to owner’s manual for
date/time setup.
C. Taking pictures
1. Set the Power switch to “q”
and set the Mode dial to
“B”.
2. Press the shutter button down
halfway to adjust the focus.
3. Press the shutter button down
fully to take a picture. The
camera makes a “Click” sound
and takes the picture.
2007
2006
2005
2004
2003
11 2100
A M
YY.MM.DDYY.MM.DD
SETS E T CANCELC A N C E L
DATE/TIMED AT E / T I M E
1
Bebeep Click
2 3
1 2

Viewing images on your PC
8.
FinePixViewer starts up automatically.
The “Found New Hardware” help message appears in the
bottom-right corner of your screen. This message will close
when the settings are completed. No action is required.
FinePixViewer starts up automatically.
Windows XP
Windows 98/98 SE/Me/2000 Professional
For more information
Refer to “How to use FinePixViewer” in the HELP menu, or chapter 5
and 6 in the Owner’s Manual, or visit Fujifilm “Q&A Search” in the
following website.
(http://home.fujifilm.com/products/digital/ )
For Macintosh users, refer to chapter 5 and 6 in the Owner’s Manual.
3. Turn your camera off.
4. If you have one, plug the AC power adapter connector into
the “DC IN 5V” socket on the camera and then plug the
adapter itself into the main power outlet, otherwise be sure
your batteries are fresh and charged.
5. Turn your PC on.
6. Connect the camera to the PC using the USB cable (mini-B).
7. Set the Power switch to “w”.
A. Install Software
Do not connect the camera to your PC until the software
installation is completed.
1. Turn on your PC and start up Windows.
●
! Users of Windows 2000 Professional or Windows XP should log in
by using a system administrator account (e.g. “Administrator”).
2. Quit all other active applications until no applications are
shown in the taskbar.
3. Load the enclosed CD-ROM into the CD-ROM drive. The
installer starts up automatically.
4. The Setup screen appears.
Click the [Installing
FinePixViewer] button.
5. After installation completed, press [Close] button.
B. Connect the Camera to your PC
1. Load an xD-Picture Card containing photographed images
into your camera.
2. Set the Power switch to “w” to turn the camera on.
Select “¶” DSC in “ò” USB MODE in the “˜” SET-UP
menu (Refer to “USING THE SET-UP SCREEN” in the
owner’s manual).
DSCD S C
NTSCN T S CN T S CNTSC
SETSET
SETSET
SETSET
ENGLISHE N G L I S H
1
2
3
4
C. Save Images
1. The Save Image Wizard starts up. Click the [Start]button.
2. Check that the files are downloaded from the camera to your
PC and that a folder with the date is created.
Ex. \My Documents \ My Pictures \ 2005_0824
D. View Images
1. Click the [Show List of Images]
button.
2.
Select “Preview” in the View menu to display an enlarged image.
A.Install Software
A.Install Software
B.Connect a Camera to PC
B.Connect a Camera to PC
C.Save Images
C.Save Images
USB socket
Camera PC