FujiFilm FINEPIX S91 00 Series User manual

Gold marking
Gold
contact
area
S9100/
S9100/
S9600
S9600
FPT-608107-YP
BL00559-200(1) E
A. Loading the batteries
1. Check that the camera is
turned off (set the Power switch
to “OFF”) before opening the
battery cover.
1. Set the Power switch to “q”
and set the Mode dial to
“B”.
3. You can select your preferred
date format.
Press “d” or “c” to select the
date format, Year, Month, Day,
Hour or Minute.
Press “a” or “b” to correct the
setting.
Press the “MENU/OK” button
after you complete the setting.
✽Refer to owner’s manual for
date/time setup.
2. Load the batteries correctly as
indicated by the polarity icons.
1. Align the gold marking on the
xD-Picture Card slot with the
gold contact area on the xD-
Picture Card™ and then push
the card firmly all the way into
the slot.
Push the CF/Microdrive firmly
all the way into the
CF/Microdrive slot.
Close the slot cover.
B. Setting up the camera
1
2. Set the Power switch to “q” or
“w”.
1
2
C. Taking pictures
D. Viewing pictures
1. Set the Power switch to “w”.
2. Press “d” or “c” to move
through your images.
Power-OFF
Power switch
Shutter
button
Flash button
Continuous
shooting button
Command dial
Viewfinder (EVF)
Diopter
adjustment dial
EVF/LCD (monitor selector) button
LCD monitor
Tr ipod mount
Photo mode ( ) button
MENU/OK button
4-direction (abdc) button
Battery cover
Focus check button
Hot shoe
Synchronizing terminal
AE-L (AE lock) button
Strap mount
Indicator lamp
Photometry selector dial
DISP/BACK button
Slot cover
CF / Microdrive
eject button
CF / Microdrive slot
xD-Picture Card slot
Manual Picture Stabilization
Aperture-priority Auto Natural light
Shutter-priority Auto Portrait
Programmed Auto Landscape
Auto Night
Movie
Release socket
Exposure
compensation
button
Playback mode
Photography mode
Mode dial
External AF sensor
AF-assist
illuminator /
Self-timer lamp
Still photography
Movie recording
Flash
Lens hood
Macro button
Flash pop-up button
Zoom ring
Focus ring
INFO (information check)
button
Strap mount
USB socket (mini-B)
Speaker
Microphone
A/V OUT (Audio / Visual
output) socket
Terminal cover
(One-touch AF) button
DC IN 5V (power input) socket
Focus mode selector switch
Camera Controls
Picture Taking
Refer to Owner’s Manual for more detailed instructions
Still images that can be viewed on the FinePix S9100 / FinePix S9600
You can use this camera to view still images recorded on the FinePix
S9100 / FinePix S9600 or still images (excluding some uncompressed
images) recorded on a FUJIFILM digital camera that supports xD-
Picture Card or CF/Microdrive.
1
2. Press the shutter button down
halfway to adjust the focus.
3. Press the shutter button down
fully to take a picture. The
camera makes a “Click” sound
and takes the picture.
Bebeep Click
2 3
xD-Picture Card CF/Microdrive
2008
2007
2006
2005
2004
11 2100
A M
YY.MM.DDYY.MM.DD
SETS E T CANCELC A N C E L
DATE/TIMED AT E / T I M E
3
2
1 2

Viewing images on your PC
8.
FinePixViewer starts up automatically.
The “Found New Hardware” help message appears in the
bottom-right corner of your screen. This message will close
when the settings are completed. No action is required.
FinePixViewer starts up automatically.
Windows XP
Windows 98 SE/Me/2000 Professional
For more information
Refer to “How to use FinePixViewer” in the HELP menu, or chapter 5
and 6 in the Owner’s Manual, or visit Fujifilm “Q&A Search” in the
following website.
(http://www.fujifilm.com/products/digital/ )
For Macintosh users, refer to chapter 5 and 6 in the Owner’s Manual.
3. Turn your camera off.
4. If you have one, plug the AC power adapter connector into
the “DC IN 5V” socket on the camera and then plug the
adapter itself into the main power outlet, otherwise be sure
your batteries are fresh and charged.
5. Turn your PC on.
6. Connect the camera to the PC using the USB cable (mini-B).
7. Set the Power switch to “w”.
USB socket
A. Install Software
Do not connect the camera to your PC until the software
installation is completed.
1. Turn on your PC and start up Windows.
●
! Users of Windows 2000 Professional or Windows XP should log in
by using a system administrator account (e.g. “Administrator”).
2. Quit all other active applications until no applications are
shown in the taskbar.
3. Load the enclosed CD-ROM into the CD-ROM drive. The
installer starts up automatically.
4. The Setup screen appears.
Click the [Installing
FinePixViewer] button.
5. After installation completed, press [Close] button.
B. Connect the Camera to your PC
1. Load a media containing photographed images into your
camera.
2. Set the Power switch to “w” to turn the camera on.
Select “¶” DSC in “ò” USB MODE in the “˜” SET-UP
menu (Refer to “USING THE SET-UP SCREEN” in the
owner’s manual).
DSCD S C
1
4
3
2
SETS E T
SETS E T
ENGLISHE N G L I S H
OKO K
SETS E T
:
:
:
:
:
:
C. Save Images
1. The Save Image Wizard starts up. Click the [Start]button.
2. Check that the files are downloaded from the camera to your
PC and that a folder with the date is created.
Ex. \My Documents \ My Pictures \ 2006_0624
D. View Images
1. Click the [Show List of Images]
button.
2.
Select “Preview” in the View menu to display an enlarged image.
Camera PC
A.Install Software
A.Install Software
B.Connect a Camera to PC
B.Connect a Camera to PC
C.Save Images
C.Save Images