I~i
Product Features and Precautions for Use
Storage
and
Maintenance
00
not
store at temperatures
below
o
°C
(3rF)
or above 40°C (104
OF).
To
ensure
continued
water reSistance,
it
is
recommended
that
you have the
water-resistant
seal
replaced
about
once ayear
(a
fee
is
charged for this
service) Contact your retailer or a
FUJI
FILM-authorized repair techni-
cian for more information.
eD
After
use,
remove water droplets and
foreign
matter
with
a
dry
cloth, firmly
latch the battery-chamber cover, and
soak
the camera
in
fresh water for
about
ten minutes. Dry
the
camera
thoroughly
after removing it from
the water.
•
Cold
Climates
CD
Battery performance drops at
low
temperatures, reducing
the
number
of
pictures
that
can be taken. Insulate
the camera
to
keep it warm or place
it
in
your clothing.
(J)
Use
anN
P-45A battery.
::D
Display response may slow at
low
temperatures. This
is
not
amalfunc-
tion.
•
After
Use
([,
Remove any foreigll matter from the
water-resistant
seal
and adjacent sur-
faces. Foreign matter could damage
the
seal,
lowering water resistance.
(Ti
After using
the
camera underwater
or
in locations where foreign matter
might
adhere to the camera body,
rinse the camera under the tap or
leave it
in
abasill
of
fresh water for
two
to
three minutes.
T·
liquid
soaps, detergents, alcohol,
and
other
cleansers may affect water
resistance and should never be used
•
During
Use
(D
Restrict
underwater
use to depths
of
5m
(16
ft.)
or
less
and periods shorter
than 120 minutes.
:D
00
not
open
or close the battery-
chamber cover while
under
water.
eD
00
not
use in
hot
springs or heated
pools.
(I)
00
not
dive
into
water
with
the cam- •
eD
era
or
otherwise subject it
to
exces-
sive force.
(J)
'J) If
the
camera
is
left on the sand, its
temperature may exceed operating
limits and sand may get
into
the
speaker
or
microphone
CD
Sunscreen, suntan lotion, or other
oily substances may discolor the
camera
body
and should be
re-
moved
with
a
damp
cloth.
er
The camera may lose water
resis-
tance if
su
bjected to excessive force
or vibration. Consult your retailer or
aFUJIFILM-authorized repair techni-
cian.
•
Before
Use
(!::
The front surface
of
the camera lens
is
protected by asheet
of
glass.
For-
eign matter on the
glass
will appear
in
photographs; keep the glass clean
at
all
times.
CD
Be
sure that the battery-chamber
and connector covers
are
fully
latched. The presence
of
water, mud,
or sand
in
the camera could cause
malfunction.
eD
00
not
open or close the battery-
chamber or connector cover
with
wet
hands or near water, for example
while on
or
by a
body
of
water.
D
Be
sure the camera
is
completely
dry
before inserting or removing batter-
ies
or
memory
cards or
connecting
the
USB
or
AN
cable.
rThe camera does
not
float.
Be
sure
to
attach the strap and keep
It
around
your wrist when using the camera.
•
Water,
Dust,
and
Shock
Resistance
eD
The camera complies
with
JIS
Class
8water resistance and
JIS
Class
6
(IP68)
dust resistance standards, and
has
passed
FUJIFILM
drop
tests (drop
height:
1.5
m/4.9ft.;
impact
surface:
plywood, thickness 5cm/2.0
in.)
com-
pliant
with
MIL-STD
810F
Method
516.5: Shock. These results were
ob-
tained
through
in-house testing and
are
not
ablanket guarantee
of
water
resistance or invulnerability
to
dam-
age or destruction. The accessories
supplied
with
the
camera
are
not
water resistant.
EN-1
ENGLISH
