FujiFilm S8000W User manual

FUJIF|Lm BL03601-100
DIGITAL CAMERA
FINEPIX S8000W Series
Owner's Manual
Thank you for your purchase of this prod-
uct. This manual describes how to use your
FUJIFILM digital camera and the supplied
software. Be sure that you have read and
understood its contents and the warnings
in "For Your Safety" (_ ii) before using the
camera.
Forinformation on related products, visit our website at
ht_p.i/www.fujif,ilm.com/products/digitd_c_meros/index.html
BeforeYouBegin
FirstSteps
BasicPhotographyandPlayback
MoreonPhotography
MoreonPlayback
WirelessNetworks
Movies
Connections
Menus
TechnicalNotes
ExifPri#t _'z ......... H£3rrl|
HIGH-DEFINITION MULTIMEDIA INTERFACE
Troubleshooting/Appendix

Location Data
The [] GEOTAGGING SET-UP > LOCATION INFO SEARCH option in the setup menu can be used
to download location data from smartphones running the free FUJIFILMCamera Application app. The
location data can then be added to pictures as they are taken. To download the app or view informa-
tion on using FUJIFILM Camera Application, visit http://opp.fujifilm-dsccom/opp.
Downloading Location Data
To download data for your current location from asmartphone:
1 PressMENU/0Kto display the menu for the current mode.
2Pressthe selector left to highlight the tabfor the current menu.
3Pressthe selector down to highlight the tab containing the desired option.
4Pressthe selector right to place the cursor in the menu. _,
5 Select [] GEOTAGGING SET-UP > LOCATION INFO SEARCH. Note that the accuracy of data will
vary from device to device.
it- _,
Allocating lOCATION INFO SEARCHto tile Fnbutton in the [] Fn BUTTON option enables to download loca-
tion data when pressing the Fnbutton (_ 47).
63

_o<nion D< __
Recording Location Data with Pictures
To save location data with new pictures:
1Download data on your current location from asmartphone (_ 63).
2Select ON for [] GEOTAGGING SET-UP > GEOTAGGING.
3Take pictures. The location data acquired in Step 2 will be added to the new images.
The camera will display the latitude and longitude of the most recently acquired lo-
cation. In addition, a _{ icon will be displayed if location data have been updated in
the last two hours; if the time elapsed since the last update is more than two hours,
the _{ icon will flash. A _]{licon indicates that no location data are available. I
Allocating GEOTAGGINGto the Fnbutton in the [] Fn BUTTON option enablesto display location dataoptions
when pressing the Fnbutton (_ 47).
64

_o<nion D< (_
Todisable geotagging, select OFF for [] GEOTAGGINGSET-UP> GEOTAGGING.Tochoose whether the cam-
eradisplays tile current location, use[] GEOTAGGINGSET-UP> LOCATION INFO.
Thecamera usesthe most recently downloaded data; ifyou have changed your location sinceyou lasttook apic-
ture, download data forthe current location before shooting. Note that the camera automatically stops recording
location data three hours after the last update.
•ViewingLocationData
During playback, pictures for which location data exist are indicated by a GE01'icon.
Latitude and longitude are shown for a few seconds each time the picture is dis-
played.
GEO_icon
LcJd_udecJnd
longitude
65

Saving Pictures to a Computer
Follow the steps below to save pictures to a computer over a wireless network. Before proceeding,
install the free FUJIFILM PC AutoSave application to the destination computer and adjust settings as
desired.
Visit tile following website for information on downloading FUJIFILMPCAutoSaveandadjusting settings:
ht_p.f/opp.fujihlm-dsc.com/pc/
1 During playback, press MENU/0Kto display the playback menu.
2Select [] PC AUTO SAVE.
66
3The options shown at right will be displayed; select a destination.
The destination carl also be selected using [] PCAUTO SAVESETTING.
_1l Follow the on-screen instructions.
•Before uploading pictures, be surethat tile remaining battery level is enough. Do not turn the camera off or
open the battery-chamber cover while saving is in progress.
• The camera will turn off automatically shortly after upload iscompleted.

Recording Movies
Press• to shoot a movie. During recording, the following indicators will be displayed and sound will
be recorded via the built-in microphone (be careful not to cover the microphone during recording).
RECicon
__ Numberofpho:os :h_:
Icanbe :dkenduring
IIr_c°rding
j l.-Timerem_Jining
To end recording, press the • button again. Recording ends automatically when the movie reaches
maximum length or memory isfull.
•Ifthe subject is poorly lit, tile AF-assistlamp may light to assisttile focus operation.
To turn the AF-assistlamp off, selectOFF for [] AF ILLUMINATOR in tile setup menu (_ 107).
• Exposureand white balance areadjusted automatically throughout recording. Tile color and brightness of tile
image mayvary from that displayed before recording begins.
berecorded
TakingPhotographsduringRecording
ressthe shutter button to take a photog raphduring recording.
• Image sizeisdetermined by tile option selected for I_ MOVIE MODE.
• Tile photo issavedseparatelyfrom the movie and does not appear aspart of the movie.
• Photoscan not be taken while a high-speed movie isbeing recorded.
The number of photos that can be taken is limited.

Re_'of'd/ng Mov e'_
68
•The indicator lamp lights while movies arebeing recorded. Donot open the battery chamber during shooting
or while the indicator lamp islit. Failureto observe this precaution could prevent tile movie from being played
back.
• Vertical or horizontal streaksmay appear in movies containing very bright subjects. This isnormal and does not
indicate a malfunction.
• The temperature of the camera may riseif it is used to record moviesfor an extended period or if the ambient
temperature ishigh. This isnormal and does not indicate a malfunction.
Movie Frame Size
Before recording, select aframe size using the [] MOVIE MODE option in the shooting menu (_ 83).
Option 'Description
m1920 x1080
r_ 128ox720
(640x 480)
j_ 640x480 (120%)
j_ 320x240 (240%)
j_ 320x120(480%)
Full HD(High Definition).
High Definition.
Standarddefinition.
High speed movie. Sound is not recorded, and focus, exposure, and white balance are
not adjusted automatically.
%AutomatcSceneSeecton
In A-%mode, tile cameraselectstile sceneaccording to shooting conditions and tile type
of subject: @ (portraits), @ (poorly-lit landscapes),@ (poorly-lit portraits), O (landscapes),
@ (close-ups),@ (backlit portraits),or @ (other subjects).
Sceneicon

[] Viewing Movies
During playback (_ 53),
movies are displayed in the
monitor as shown at right.
The following operations
can be performed while a
movie isdisplayed:
Operation Description
Start/pause Pressthe selectordownto start playback.
playback Pressagain to pause.
End Pressthe selectorup to end playback. If
playback/ playback is not in progress, pressing tile
delete selector up will delete the current movie.
Presstheselectorleftorrightto adjust play-
Advance/ back speed. Speed isshown bytile num-
rewind ber of arrows (1_or 4).
PressMENU/OKto pause playbackand dis-
play volume controls. Pressthe selector
up or down to adjust the volume; press
MENU/OIlagain to setthe volume.
Adjust
volume
Progress isshown in the monitor during playback.
Progressbor
%.ViewingMoviesonaComputer
Copy movies to the computer before viewing.
_q
Do not cover the speakerduring playback.
0
69

Viewing Pictures on TV
Connecting_ the Camera to High Definition (HD)_ TVs
When an HDMI cable (available from third-party suppliers) isconnected, pictures and sound are played
back on the TV.
'! Turn the camera offand connect an HDMI cable available from third party suppliers.
Inser_in_oHDMI Inser_in_oHDMI
corn _c _or conned _o1
HDM/Mini dbnnector
The USBcable carl not be usedwhile an HDMIcable isconnected.
2Tune the television to the video or HDMI input channel. See the documentation supplied with the
television for details.
3Pressthe [] button for about a second to turn the camera on. The camera monitor turns off and
pictures and movies are played back on the TV. Note that the camera volume controls have no ef-
fect onsoundsplayedontheTV;usethetelevisionvolumecontrolstoadjustthevolume.
,maoequa,, ydropsdur,ngmov,ep,ayback
_d
When connecting the cable, be surethe connectors arefully inserted.

Printing Pictures via USB
Ifthe printer supports PictBridge, the camera can be connected directly to the printer and _f
pictures can be printed without first being copied to a computer. Note that depending on rJ
the printer, not all the functions described below may be supported. PiclBridge
Connecting_ the Camera
1Connect the supplied USBcable as shown and
turn the printer on.
2Pressthe [] button for about asecond to turn
the camera on. [] USB will be displayed in
the monitor, followed by the PictBridge display
shown below at right.
TOTAL: O000D
_SHEETS
Printing Selected Pictures
1Press the selector left or right to dis- 4/_,b
play a picture you wish to print.
2Press the selector up or down to F_A_-_
choose the number of copies (up to
99).
3Repeat steps 1-2 to select additional
pictures. Press MENU/OKto display a
confirmation dialog when settings
are complete.
TOTAL:9 SHEETS
4PressMENU/OKto start printing.
o
71

Pf'h in_ P: _re_f,vh" U.S_
_PrintingtheDateofRecording
To print the date of recording on pictures, pressDISP/
BACKin steps 1-2 to display tile PictBridge menu (see
"Printing the DPOFPrint Order,"below). Pressthe se-
lector up or down to highlight PRINTWITH DATE ['_
and pressMENU/0Kto return to the PictBridge display
(to print pictures without the date of recording, select
PRINTWITHOUT DATE).
Ifno pictures are selected when the MENU/OKbutton is
pressed,the camera will print one copy of the current
picture.
Printing the DPOF Print Order
To print the print order created with [] PRINT
ORDER (DPOF) in the playback menu (_ 74).
1In the PictBridge display, press DISP/ _,,_
BACKto open the PictBridge menu.
2Press the selector up or down to _,,,_,A
highlight _- PRINT DPOF.
3Press MENU/OKto display a confirma-
tion dialog.
E_ TOTAL: 9 SHEETS
72

P;h' /n_ P: _re_svk U.S_
4PressMENU/OKto start printing.
DurngPrntng
Tile message shown at right
is displayed during printing.
Press DISP/BACI(to cancel be-
fore all pictures are printed
(depending on the printer,
printing may end before the
current picture hasprinted).
If printing is interrupted, press[] to turn tile camera
off and then on again.
iiiConfirmthat "PRINTING"isnot displayed in the moni-iii
!!! iii
iiitor and turn tile camera off. Disconnect tile USBiii
i_cable.
•Printpictures from amemory cardthat hasbeen for-
matted in tile camera.
•If tile printer does not support date printing, the
PRINTWITH DATE ['_ option will not be available in
tile PictBridge menu and tile date will not be printed
on the pictures in the DPOFprint order.
• When pictures are printed via direct USBconnection,
page size, print quality, and border selections are
made using tile printer.
o
73

Pf'h in_ P: _mf, vk U.S_
Creating a DPOF Print Order
The [] PRINT ORDER (DPOF) option in the play-
back menu can be used to create a digital "print
order" for PictBridge-compatible printers (_ 115)
or devices that support DPOR
%, DPOF
DPOF (Digital PrintOrder Format)is standard iim_ _
that allows pictures to be printed from "print
orders" stored on a memory card. Tile infor-
mation in the order includes the pictures to
be printed, date imprint, and tile number ofcopies of
each picture.
• WITHDATE["_IWITHOUTDATE
Tomodify the DPOFprint order,select [] PRINT
ORDER (DPOF)in the playback menu and press
the selector up or down to highlight WITH DATE
[_ or WITHOUT DATE.
PressMENU/OKand follow the steps below.
1 Pressthe selector left or right to dis- .,_R_.
play apicture you wish to include in
or remove from the print order.
/4

P;h' in;_ P: _re_f,vk U.S_
2Press the selector up or down to _,_
choose the number of copies (up to
99). To remove a picture from the
order, press the selector down until the num-
ber of copies is 0.
DPOF: 00001 ' TO_olnumberofprin_s
Number of copies
%.IntelligentFaceDetection
If the current picture was created with Intelligent
FaceDetection, pressing • setsthe numberofcop-
ies to tile number of faces detected.
When pictures are printed via direct USBconnec-
tion, page size,print quality, and border selections
are made using the printer.
3Repeat steps 1-2 to complete the
print order. Press MENU/OKto save
the print order when settings are
complete, or DISP/BACKto exit with-
out changing the print order.
4The total number of prints is dis-
played in the monitor. Press MENU/
OKto exit.
The pictures in the current
print order are indicated by a
.D. icon during playback.
o

Pf'I' ting Pk:t_ ms v _USB
• Print orders carl contain amaximum of 999 pictures.
• If a memory card is inserted
containing a print order cre-
ated by another camera, tile
message shown at right will
be displayed. PressingMENU/
OKcancels tile print order; a
new print order must be created asdescribed above.
•RESETALL
To cancel the current print
order, select RESET ALL
in the []PRINT ORDER
(DPOF) menu. The confir-
mation shown at right will
be displayed; press MENU/OKto remove all pictures
from the order.
76

Viewing Pictures on a Computer
The supplied software can be used to copy pictures to a computer, where they can be stored, viewed,
organized, and printed. Before proceeding, install the software asdescribed below. OONOTconnect the
camera to the computer until installation is complete.
Windows: Installing MyFinePix Studio
1Confirm that the computer meets the following system requirements:
CPU
RAM
Free diskspace
GPU
Video
Other
Windows 8/Windows 7 (SP1)/Windows Vista (SP2)1Windows XP(SP3)1
3 GHz Pentium 4 or better 2 GHz Pentium 4 or better
(2.4 GHz Core 2 Duo or better) 2 (2.4 GHz Core 2 Duo or better) 2
512 MB or more
1GB or more (1GB or more) 2
2 GB or more
Supports DirectX 9 or later Supports DirectX 7 or later
(recommended) (required;performancenotguaranteedwith otherGPUs)
1,024x 768 pixels or more with 24-bit color or better
Built-in USB port recommended. Operation is not guaranteed with other USB ports.
Intemet connection (broadband recommended) required to install .NET Framework (if necessary), to use _'.
auto update feature, and when performing such tasks as sharing pictures on-line or via e-mail.
Installation of .Net Framework 3.5 SP1 required to use upload picture feature and MapViewer.
I Other versions of Windows are not supported. Only pre-installed operating systems are supported; operation is not
guaranteed on home-built computers or computers that have been upgraded from earlier versions of Windows.
2 Recommended when displaying HD movies.
77

Vie,winq Pictu_e,sor} aComputer
2
3
Start the computer. Log in to an account with
administrator privileges before proceeding.
Exit any applications that may be running and
insert the installer CD in a CD-ROM drive.
ii an AutoPlay dialog is displayed, click SETUP.
EXE A "UserAccount Control" dialog will then be
displayed; click Yes (Windows 8/Windows 7) or
Allow (Windows Vista).
The installer will start automatically; click In-
stall MyFinePix Studio and follow the on-
screen instructions to install MyFinePix Studio.
fthe nstaerDoesNotStartAutomatically
(Windows7/WindowsVista/WindowsXP)
the installer does not start automatically, se-
lect Computer or My Computer from the Start
menu then double<lick tile FINEPIXCD icon to
ii
open tile FINEPIXCD window and double<lick
setup or SETUP.EXE.
®@ If the Installer DoesNot Start Automatically
(Windows8)
1 Select Desktop on the Start screen.
2 Select File Explorer on the taskbar.
3 Select Computer in the navigation pane.
4 Double<lick the drive icon inserting the FINEPIX
CD and follow the on-screen instructions to in-
stall.
4 If prompted to install Windows Media Player or
DirectX, follow the on-screen instructions to
complete installation.
5Remove the installer CD from the CD-ROM
drive when installation is complete. Store
the installer CD in a dry location out of direct
sunlight in case you need to re-install the soft-
ware. The version number is printed at the top
of the CD label for reference when updating
the software or contacting customer support.
Installation is now complete. Proceed to "Con-
necting the Camera" on page 79.
78

Vewin_ P :t_t'_*_f,on _ d:omp_ _;*f,
Importing_pictures or movies to Mac
Use a standard application in Mac OSsuch as Im-
age Capture to import pictures or movies to Mac.
Connecting° the Camera
1Ifthe pictures you wish to copy are stored on a
memory card, insert the card into the camera
(_ 11).
Windows usersmay require tile Windows CDwhen
starting tile software for tile first time.
Lossof power during transfer could resultin lossof
data or damage to the memory card. Charge tile
battery before connecting tile camera.
2 Turn the camera off and connect the supplied
USBcable as shown, making sure the connec-
tors are fully inserted. Connect the camera di-
rectly to the computer; do not use a USB hub
or keyboard.
3Press the [] button for about a second to
turn the camera on. After starting MyFinePix
Studio, follow the on-screen instructions to
copy pictures to the computer. Toexit without 9.
copying pictures, click Cancel.
For more information on using the supplied soft-
ware, start the application and select the appro-
priate option from the Help menu.

Vi_'win9 Pictu_,s or} aComput<;_r
[]
•Iramemorycarct corltairling alargenumberofimages
isinserted, there may be a delay before the software
starts and you may be unable to import or save im-
ages. Usea memory card reader to transfer pictures.
• Makesurethat the computer does not display ames-
sagestating that copying isin progress and that the
indicator lamp isout before turning tile cameraoff or
disconnecting tile USBcable (if tile number of imag-
escopied isvery large,tile indicator lamp may remain
lit after the messagehascleared from the computer
display). Failure to observe this precaution could re-
sultin lossof data or damage to tile memory card.
• Disconnect tile camera before inserting or removing
memory cards.
• Insomecases,it may not be possibleto accesspictures
savedto anetwork server usingtile supplied software
in tile same way ason astandalone computer.
• Tile user bears all applicable fees charged by the
phone company or Intemet service provider when
using servicesthat require an Intemet connection.
DisconnectingtheCameia
After confirming that tile indicator lamp isout, follow
tile on-screen instructions to turn tile cameraoff and
UninstallingtheSuppliedSoftware
Only uninstall tile supplied software when it is no
longer required or before beginning reinstallation.
After quitting tile software and disconnecting tile
!!! iii
camera, open the control panel and use "Programs
and Features" (Windows S/Windows 7/Windows
Vista) or "Add or Remove Programs" (Windows XP)
to uninstall MyFinePix Studio. Under Windows, one
!!! iii
or more confirmation dialogs may be displayed; read
the contents carefully before clicking OK.
80

Using the Menus: Shooting Mode
Using_ the Shooting Menu
1 PressMENU/OKto display the shoot-
ing menu.
2Pressthe selector up or down to
highlight the desiredmenu item.
3Pressthe selector right to displayop-
tions for the highlighted item.
4Press the selector up or down to
highlight the desiredoption.
5 Press MENU/OKto select the high-
lighted option.
6 Press DISP/BACKto exit from the
menu,
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii