FujiFilm X-S10 Owner's manual

New Features Guide
Version 2.00
Features added or changed as a result of rmware updates may no
longer match the descriptions in the documentation supplied with
this product. Visit our website for information on the updates avail-
able for dierent products:
https://fujifilm-x.com/support/download/firmware/cameras/
BL00005146-200 EN

Contents
X-S10 rmware version 2.00 adds or updates the features
listed below. For the latest manuals, visit the following
website.
http://fujifilm-dsc.com/en/manual/
No. Description X-S10
P
See
PVer.
1
1A LOCK item has been added to DBUTTON/DIAL
SETTING in the setup menu. 228 1
2.00
2
2
A NETWORK SETTING item has been added to
DCONNECTION SETTING in the setup menu, al-
lowing wireless LAN settings to be adjusted for use with
wireless tethered shooting.
235 2
3
3
The DCONNECTION SETTING > INFORMATION
item in the setup menu now shows the IP address in
addition to the MAC and Bluetooth addresses.
239 2
4
4
The DCONNECTION SETTING > CONNECTION
MODE item has been modified to support not only
photo upload, RAW conversion, and the upload and
download of camera settings, but also such features as
tethered still photography and movie recording.
237 3

1
Changes and Additions
Changes and additions are as follows.
X-S10 Owner’s Manual: P228 Ver. 2.00
LOCK
Lock selected controls to prevent unintended operation.
Option
Option
Description
Description
LOCK SETTING
Choose from the following:
• UNLOCK: Reset lock options.
•
ALL FUNCTION: Lock all controls in the FUNCTION
SELECTION list.
• SELECTED FUNCTION: Lock only the controls selected
in the FUNCTION SELECTION list.
FUNCTION SELECTION
Choose the controls locked when SELECTED FUNCTION
is chosen for LOCK SETTING.
N
The controls selected using SELECTED FUNCTION can be locked at any
time during shooting by pressing and holding MENU/OK. To unlock the
controls, press and hold the button again.

2
X-S10 Owner’s Manual: P235 Ver. 2.00
NETWORK SETTING
Adjust settings for connection to wireless networks.
Option
Option
Description
Description
WIRELESS ACCESS
POINT SETTING
• SIMPLE SETUP: Connect to an access point using simple
settings.
• MANUAL SETUP: Manually adjust settings for connec-
tion to a wireless network. Choose the network from a list
(SELECT FROM NETWORK LIST) or enter the name manu-
ally (ENTER SSID).
WIRELESS IP
ADDRESS SETTING
• AUTO: The IP address is assigned automatically.
•
MANUAL: Assign an IP address manually. Manually choose
the IP address (IP ADDRESS), network mask (NETMASK),
and gateway address (GATEWAY ADDRESS).
X-S10 Owner’s Manual: P239 Ver. 2.00
INFORMATION
View the camera’s MAC, Bluetooth, and wireless network IP ad-
dress.

3
X-S10 Owner’s Manual: P237 Ver. 2.00
CONNECTION MODE
Adjust settings for connection to external devices.
Option
Option
Description
Description
USB CARD READER
Connecting the camera to a computer via USB automatically
enables data transfer mode, allowing data to be copied to
the computer. The camera functions normally when not con-
nected.
USB TETHER
SHOOTING AUTO
The camera can be controlled from computers, gimbals,
drones, or other devices connected via USB. The camera au-
tomatically enters “tethered shooting” (i.e., remote-control)
mode when the external device is turned on and returns to
normal operation when the external device turned off or dis-
connected.
• Photographs can be taken remotely and automatically
downloaded to computers running Capture One, Adobe®
Photoshop® Lightroom® + Tether Plugin, or FUJIFILM X
Acquire. FUJIFILM X Acquire can also be used to save and
load camera settings.
• The camera can be used as a webcam when connected to
a computer running FUJIFILM X Webcam.
• Remote photography and movie recording are available
when the camera is connected to a compatible device
such as a gimbal or drone. Use camera controls to switch
between still photography and movie recording. The fea-
tures available vary with the device connected.
USB TETHER
SHOOTING FIXED
As for USB TETHER SHOOTING AUTO, except that the
camera remains in “tethered shooting” (remote-control)
mode when the external device is off or not connected, al-
lowing the device to resume control when the connection
is re-established after an accidental disconnection or other
disruption. At default settings, pictures are not recorded to
the memory card.

4
Option
Option
Description
Description
WIRELESS TETHER
SHOOTING FIXED
Choose this option for wireless remote photography. Select a
network using DCONNECTION SETTING> NETWORK
SETTING.
USB RAW CONV./
BACKUP RESTORE
Connecting the camera to a computer via USB automatical-
ly enables USB RAW conversion/backup restore mode. The
camera functions normally when not connected.
• USB RAW CONV. (requires FUJIFILM X RAW STUDIO): Use the cam-
era’s image processing engine to rapidly convert RAW files
to other formats while maintaining image quality.
• BACKUP RESTORE (requires FUJIFILM X Acquire): Save and load
camera settings. Reconfigure the camera in an instant or
share settings with other cameras of the same type.
O
DPOWER MANAGEMENT> AUTO POWER OFF settings also apply
during tethered shooting. To prevent the camera turning o automat-
ically, select OFF for AUTO POWER OFF.
N
Visit the websites below to learn more about or download the follow-
ing computer software:
• Capture One Express Fujilm:
https://www.captureone.com/products-plans/capture-one-express/fujifilm
• Capture One Pro Fujilm:
https://www.captureone.com/explore-features/fujifilm
• Adobe® Photoshop® Lightroom® + Tether Plugin:
https://fujifilm-x.com/global/products/software/adobe-photoshop-lightroom-tether-plugin/
• FUJIFILM X Acquire:
https://fujifilm-x.com/products/software/x-acquire/
• FUJIFILM X RAW STUDIO:
https://fujifilm-x.com/products/software/x-raw-studio/
• RAW FILE CONVERTER EX powered by SILKYPIX:
https://fujifilm-x.com/support/download/software/raw-file-converter-ex-powered-by-silkypix/
• FUJIFILM X Webcam:
https://fujifilm-x.com/products/software/x-webcam/

5
MEMO

7-3, AKASAKA 9-CHOME, MINATO-KU, TOKYO 107-0052, JAPAN
https://fujifilm-x.com