FujiFilm X-T20 User manual

BL00004988-200 EN
New Features Guide
Version 2.00
Features added or changed as a result of rmware updates
may no longer match the descriptions in the documentation
supplied with this product. Visit our website for information
on the updates available for dierent products:
http://www.fujifilm.com/support/digital_cameras/software/fw_table.html

Contents
X-T20 rmware version 2.00 adds or updates
the features listed below. For the latest manual,
visit the following website.
http://fujifilm-dsc.com/en/manual/
No. Description X-T20
P
See
PVer.
1
1
To view separate RGB histograms and a display
showing areas of the frame that will be overex-
posed at current settings superimposed on the
view through the lens, press the function button
to which HISTOGRAM is assigned.
19 1 2.00
2
2Touch controls have been added. 22 2 2.00
3
3
To refocus using autofocus while recording
is in progress, tap the touch screen or press
the button to which AF-ON has been as-
signed.
56 3 *
4
4
LARGE INDICATORS MODE(EVF) and
LARGE INDICATORS MODE(LCD) options
have been added to DSCREEN SETTING in
the setup menu.
220 4 2.00
5
5
A LARGE INDICATORS DISP. SETTING op-
tion has been added to D SCREEN SETTING
in the setup menu.
220 5 2.00

No. Description X-T20
P
See
PVer.
6
6
Changes have been made to the content
of the DBUTTON/DIAL SETTING>
TOUCH SCREEN SETTING option in the
setup menu.
230 6 1.10
7
7
A DCONNECTION SETTING>
PC CONNECTION MODE item has been
added to the setup menu.
239 7 2.00
8
8Third-party studio flash commanders compatible
with the FUJIFILM flash system can now be used. 257 8 2.00
9
9
FUJINON XC15-45mmF3.5-5.6 OIS PZ lenses are
now supported.
272 9 2.00
10
10
In addition to the instax SHARE printers list-
ed in “Accessories from FUJIFILM”, the cam-
era now supports the SP-3.
293 10 1.10
N
The asterisks in the “Ver.” column indicate features avail-
able in earlier versions; only the descriptions in the man-
ual have been changed.

1
Changes and Additions
Changes and additions are as follows.
X-T20 Owner’s Manual: P19 Ver. 2.00
Customizing the Standard Display
Histograms
Histograms show the distribution of tones in the image. Brightness is
shown by the horizontal axis, the number of pixels by the vertical axis.
Number of
pixels
Shadows Highlights
Pixel brightness
• Optimal exposure: Pixels are distributed in an
even curve throughout the tone range.
• Overexposed: Pixels are clustered on the right
side of the graph.
• Underexposed: Pixels are clustered on the left
side of the graph.
To view separate RGB histograms and a dis-
play showing areas of the frame that will be
overexposed at current settings superim-
posed on the view through the lens, press
the function button to which HISTOGRAM
is assigned.
AOverexposed areas blink
BRGB histograms
AB

2
X-T20 Owner’s Manual: P22 Ver. 2.00
Touch Screen Mode
The following touch controls have been added.
No. Description X-T20
P
1
1Flick gestures can now be used to choose the focus area
during focus zoom. 86
2
2
Pinch-in and pinch-out gestures can now be used to
choose the number of pictures (one, nine, or a hundred)
displayed during multi-frame playback.
178
3
3
Pictures in the nine- and hundred-frame displays can
now be selected using touch or drag gestures; dou-
ble-tap a picture to view it full frame.
179
4
4Touch controls can now be used in the Q(quick) menu. 243
5
5The touch screen can now be used for text entry. 235
236

3
X-T20 Owner’s Manual: P56 *
Recording Movies
N
The indicator lamp lights while recording is in progress.
During recording, you can change exposure compensa-
tion by up to ±2EV and adjust zoom using the zoom ring
on the lens (if available).
If the lens is equipped with an aperture mode switch,
select the aperture mode before beginning recording.
If an option other than Ais selected, shutter speed and
aperture can be adjusted while recording is in progress.
To refocus using autofocus while recording is in prog-
ress, tap the touch screen or press the button to which
AF-ON has been assigned.
Recording may be unavailable at some settings, while
in other cases settings may not apply during recording.

4
X-T20 Owner’s Manual: P220 Ver. 2.00
LARGE INDICATORS MODE(EVF)
Select ON to display large indicators in the electronic
viewnder. The indicators displayed can be selected using
DSCREEN SETTING > LARGE INDICATORS DISP. SETTING.
OFF ON
LARGE INDICATORS MODE(LCD) Ver. 2.00
Select ON to display large indicators in the LCD monitor.
The indicators displayed can be selected using DSCREEN
SETTING > LARGE INDICATORS DISP. SETTING.
OFF ON
N
If LARGE INDICATORS MODE is assigned to a func-
tion button, the button can be used to toggle LARGE
INDICATORS MODE on (ON) and o (OFF) (
P
224, 250).

5
X-T20 Owner’s Manual: P220 Ver. 2.00
LARGE INDICATORS DISP. SETTING
Choose the indicators
displayed when ON is selected
for DSCREEN SETTING >
LARGE INDICATORS
MODE(EVF) or LARGE
INDICATORS MODE(LCD).
Scale
Expo. DISP.
LARGE INDICATORS DISP. SETTING
Option
Option
Description
Description
A
Expo. DISP.
Expo. DISP.
Choose the items listed at the bottom of the dis-
play. Selected items are indicated by check marks
(R); to deselect, highlight the check marks and
press MENU/OK.
B
d
d
Scale
Scale Select ON to display the exposure indicator.
C
L1, L2, L3, L4
L1, L2, L3, L4 Choose up to four large icons for display on the
left side of the screen.
D
R1, R2, R3, R4
R1, R2, R3, R4 Choose up to four large icons for display on the
right side of the screen.

6
X-T20 Owner’s Manual: P230 Ver. 1.10
TOUCH SCREEN SETTING
Enable or disable touch-screen controls.
Option
Option
Description
Description
TOUCH SCREEN
TOUCH SCREEN
ON/OFF
ON/OFF
• ON: Touch controls enabled; the LCD monitor
functions as a touch screen.
• OFF: Touch controls disabled; the LCD monitor
cannot be used as a touch screen.
EVF TOUCH
EVF TOUCH
SCREEN AREA
SCREEN AREA
SETTINGS
SETTINGS
Select the area of the LCD monitor (ALL, RIGHT, or
LEFT) used for touch controls while the viewfinder
is active, or choose OFF to disable touch controls
while the viewfinder is in use.

7
X-T20 Owner’s Manual: P239 Ver. 2.00
PC CONNECTION MODE
Adjust settings for connection to a computer.
Option
Option
Description
Description
USB CARD
READER
Connecting the camera to a computer via USB au-
tomatically enables data transfer mode, allowing
data to be copied to the computer. The camera
functions normally when not connected.
USB RAW CONV./
BACKUP RESTORE
Connecting the camera to a computer via USB
automatically enables USB RAW conversion/
backup restore mode. The camera functions nor-
mally when not connected.
• USB RAW CONV. (requires FUJIFILM X RAW STUDIO):
Use the camera’s image processing engine to
rapidly convert RAW files to high-quality JPEG
images.
• BACKUP RESTORE (requires FUJIFILM X Acquire):
Save and load camera settings. Reconfigure the
camera in an instant or share settings with oth-
er cameras of the same type.