5
STEP 14
STEP 13
Reinstall the strain relief.
Plug the cables into the dock.
STEP 16
STEP 15
Raise and tighten the basket.
Reinstall the engine by inserting the front
back end until the latches click into place.
end first. Push down on both sides of the
Reconnect the TTC to the engine.
Press the Power button on the printer,
then adjust the printer settings under
STEP 17
the system settings.
STEP 18
Plug the system AC power cord into
the wall, and turn the system back on.
Reinstall your USB devices.
