Fujioh FV-EL51 Manual

Operating / Installation Manual
FV-EL51
FV-EL52
FV-EL53
Please read this manual carefully
before using the appliance.

INTRODUCTION
Dear Client,
Thank you for having purchased our product.
IMPORTANT:
Keep these use instructions with the product. Should the product be sold or transferred to other persons, ensure it is accompanied by its
instructions.
We ask that you carefully read these recommendations before installing and using the product. They have been drafted for your safety and those
near you.
This manual gives indications to maintain the aesthetical and functional qualities of the oven unaltered.
You can also visit our website: www.fujioh.com where you will find our latest news and much more useful and complementary information.
With the constant aim to improve our products, we reserve to amend their technical, functional or aesthetical features, parallel to the technical
evolution.
-
Important:
Before starting the oven, carefully read this installation and use manual in order to better know its functioning.
1. OVEN USE AND SAFETY WARNINGS
2. INSTALLATION 2........................................................................................................
SUMMARY
30............................................................................................................... FIGURES
3. DESCRIPTION OF THE CONTROLS ..........................................................................
4. USE OF THE OVEN ...............
...................................................................................
5. AVAILABLE ACCESSORIES ......................................................................................
6. COOKING ADVICE ...................................................................................................
7. CLEANING AND MAINTENANCE .......
........................................................................
8. EXTRAORDINARY MAINTENANCE .......................
.....................................................
1.........................................................................
BUILT-IN ELECTRIC OVEN
3
24
25
25
27
28

1
INSTRUCTIONS FOR THE INSTALLER:
They indicate the operations for the QUALIFIED ENGINEER ,noitallatsniehttuoyrracotevahlliwohw
commissioning and testing of the appliance.
INSTRUCTIONS FOR THE USER:
indicate the ovens’ use recommendations, the controls description and the correct cleaning and maintenance
operations.
1. Oven use and safety warnings
PRESENTATION
Warning: this appliance and accessibile parts may heat up during use. Be careful not to touch heating elements. The appliance should be
kept out of the reach of children younger than 8 years unless supervised at all times.
The appliance can only be used by children older than 8 years and by people with reduced phisical, sensory, mental capabilities or lack of
experience or knowledge only if strictly supervised whilst using it or have been shown how to use it in a safe way and understand the hazards
involved. Do not let the children play with the appliance. Children mus not be allowed to clean the appliance unsupervised.
Warning: the accessibile parts may get hot when in use: keep the children well away from the appliance
Never use steam or high pressure equipment to clean the oven; this may cause problems to the electrical safety devices.
Wire shelves and drip trays must be positioned inside the oven utilizing the the special guides in a proper way (the oven is equipped with 5
guides to position the drip trays and the wire shelves at different levels or 4 levels on lateral side racks as decribed in detail on chapters 5
and 6).
Disconnect the oven from the mains before every intervention which requests access to the live parts.
Make sure that the appliance is switched off before replacing the oven light in order to avoid electrical scocks.
Do not utilize abrasive sponges or sharp scrapers to clean the oven glass door as this may scratch the surface causing the glass to shatter.
This appliance is exclusively intended for non-professional use. Do not use the appliance for commercial or industrial purposes or for any
other purpose for which it was not conceived.
This appliance has been conceived for domestic and private use. It is exclusively intended for cooking food products. Therefore, any
liability for uses different to those indicated is declined. None of the components of this oven are made with asbestos.
Do not amend and try to amend the technical features of this appliance, as this might present a danger for yourselves and for those near you.
Before using the oven for the first time, heat it up empty for about 15 min. Ensure the room is ventilated. You may smell a particular odour
or notice a small emission of smoke. THIS IS NORMAL.
The appliance becomes hot during use. Do not touch the thermoelements inside the oven. Do not go near the hot upper elements with the
hands when inserting or removing the pans or pan supports from the oven, use thermal kitchen gloves.
When cooking food, only use plates or pans resistant to high temperatures.
Never place aluminium foil directly on to the oven support surface, as the accumulated heat may cause the enamel to deteriorate.
Do not lay heavy objects on the oven door and ensure that children do not sit on it.
When cleaning the inside, ensure the oven is cold and, moreover, that it is switched off.
•
•
•
•
•
•
•
•
•
•
•
•
•
The alcohol vapours inside the hot cooking compartment may catch fire. Do not cook food containing large quantities of beverages with a
high alcohol content. Only use small quantities of beverages with a high alcohol content. Open the door of the appliance carefully.

2
2. INSTALLATION
2.1 Electrical connection
Ensure that the voltage corresponds to that indicated in the plaque located on the oven door frame.
The cables for the connection to the mains must be protected from direct contact with the oven’s metal casing.
The plaque must never be removed.
Attention: the ground connection must be compliant with law.
After installation, carry out a brief oven check, following the instructions reported further down.
In case the appliance does not function, disconnect it from the mains and contact the after-sales assistance centre nearest to you.
Do not attempt to repair the appliance.
ATTENTION:
The manufacturer declines every responsibility for damages suffered by persons and things, caused by the non
compliance of the above prescriptions or deriving from the tampering of even a single part of the appliance and the
use of non original spare parts.
INSTRUCTIONS FOR THE INSTALLER
2.2 Oven positioning
The oven is pre-arranged for built-in purposes.
The sizes must respect the quota indicated in figures 1and 2.
The upper/rear part of the cabinet must have an opening of at least 80-90 mm deep, as indicated in figure 1.
Tighten the 4 screws by firstly inserting them inside the bush and then inside the frame (figures 1 Ref. A, B).
For installations underneath the “top” surface, ensure that the rear/lower part of the cabinet has an opening similar to that shown in figure 2.
(reference C).
Do not use the door as a lever to insert the oven inside the cabinet.
Do not put pressure on the open door.
Ovens are supplied with a three-core power cable with free terminals. And the terminals must connect with the fixed Avoid using reductions or adaptors as they may cause overheating or burning.
wiring. If the oven is permanently connected to the power supply, install a device thet ensures disconnection
from the power supply, with a contact opening distance (at least 3mm) enabling complete disconnection in
category III overvoltage conditions. Make sure :
a) The electrical installation has sufficient voltage
b) 3x1.5 mm2 H05RR-F type cable is used when repalcing the power cable
c) The connection polarities of the free terminals are respected (Brown Line, Blue Neutral, Yellow Green Earth)
d) The fuse in your sut-up must be 16 Amperes
N.B. Make sure the characteristics of the household electrical system (voltage,maximum power and current)
are compatible with those of your oven.
= = =/
;;;
;

3
THERMOSTAT:
Cooking temperature is chosen turning the knob clockwise to the desired value, between 50° and
MAX.
MECHANICAL MINUTE COUNTER:
The minute counter can be regulated for a maximum period of one hour.The regulation knob must
be turned clockwise until the 60 minute position, and then placed at the desired time, rotating it
anti-clockwise.
When the pre-set time is over, an acoustic signal goes off, which stops automatically.
The minute counter does not interrupt the oven functioning when the acoustic signals goes off.
120 MINUTE MECHANICAL COOKING END TIMER:
Place the thermostat knob on the desired time, and then rotate the knob of the timer clockwise to
the desired time (max 120 minutes).
When the timer returns to the starting “0” position, an acoustic signal will communicate that the
oven has turned off automatically.
If cooking time is greater than 2 hours, or if you desire to use the oven manually, rotate the knob
to the position .
Oven light
Upper and
lower heating element
Lower heating element
Grill heating element
Grill heating element
Plus fan
Ventilated heating element
Defrosting
Lower heating element
plus fan
Upper heating element
plus Grill
Upper and lower heating
element plus fan
Pre-heating
Roasting jack
Upper heating element
Plus Grill and plus fan
Pizza function
Grill heating element
Plus Roasting jack and plus fan
Grill heating element
Plus Roasting jack
Upper heating element
Plus Grill and plus Roasting jack
INSTRUCTIONS FOR THE USER
3. Description of the controls
Act on the control devices placed on the oven panel to select the various functions with the knob.
KEY