Fujitsu UTY-VBGX User manual

BACnet Gateway for VRF System
UTY-VBGX
INSTRUCTION MANUAL
Issue Date: 03/2021
r1.4.0 eng
PART No. 9708569239-02

BACnet Gateway for VRF System INSTRUCTION MANUAL r1.4.0 eng
2/159
Copyright© 2021 Fujitsu General Limited - All rights reserved
© FUJITSU GENERAL LIMITED 2021 All rights reserved
Information in this document is subject to change without notice. The software described in this document is
furnished under a license agreement or nondisclosure agreement. No part of this publication may be reproduced,
stored in a retrieval system or transmitted in any form or any means electronic or mechanical, including
photocopying and recording for any purpose other than the purchaser’s personal use without the written permission
of Fujitsu General Limited.
TRADEMARKS
All trademarks and trade names used in this document are acknowledged to be the copyright of their respective
holders.
BACnet is a trademark or registered trademark of the American Society of Heating, Refrigerating and Air-
Conditioning Engineers, Inc.

BACnet Gateway for VRF System INSTRUCTION MANUAL r1.4.0 eng
3/159
Copyright© 2021 Fujitsu General Limited - All rights reserved
LICENSE AGREEMENT FOR “CONFIGURATION TOOL OF BACnet
GATEWAY FOR VRF SYSTEM”
IMPORTANT-READ CAREFULLY
This “CONFIGURATION TOOL of BACnet GATEWAY for VRF SYSTEM” License Agreement (“LICENSE AGREEMENT”) is a legal
agreement between you and Fujitsu General Limited (“FGL”) for the use of CONFIGURATION TOOL for VRF BACnet GATEWAY
products consisting of computer software and online, electronic and/or printed documentation (collectively “SOFTWARE PRODUCT” or
“SOFTWARE”). By installing, copying, or otherwise using the SOFTWARE PRODUCT, you accept to be bound by all of the terms and
conditions of this LICENSE AGREEMENT. If you do not agree to any of the terms and conditions of this LICENSE AGREEMENT, you
shall not use the SOFTWARE PRODUCT and shall promptly return the SOFTWARE PRODUCT to the place where you have obtained it.
1. COPYRIGHT AND OWNERSHIP.
The SOFTWARE PRODUCT is protected by copyright laws and international copyright treaties as well as other intellectual property
laws and treaties. The SOFTWARE PRODUCT is licensed to you, not sold. FGL owns the title, copyright, and other intellectual property
rights in the SOFTWARE PRODUCT.
2. GRANT OF LICENSE.
FGL hereby grants you the limited, non-exclusive and non-transferable rights to use the SOFTWARE PRODUCT only for the purpose of
controlling the VRF air-conditioning system products (VRF) provided you comply with all terms and conditions of this LICENSE
AGREEMENT.
3. DESCRIPTION OF OTHER RIGHTS AND LIMITATIONS.
(1) LIMITATIONS ON REVERSE ENGINEERING, DECOMPILATION, AND DISASSEMBLY.
You shall not modify, alter, reverse engineer, decompile, or disassemble the SOFTWARE PRODUCT. You shall not alter or remove
any copyright, trademark or other proprietary notice of FGL from the SOFTWARE PRODUCT.
(2) NO RENTAL, LEASE AND TRANSFER.
You shall not rent, lease or transfer the SOFTWARE PRODUCT to any person and/or entity (-ies).
(3) TERMINATION.
Without prejudice to any other rights, FGL may terminate this LICENSE AGREEMENT if you fail to comply with any terms and
conditions of this LICENSE AGREEMENT. In such an event, you shall promptly return all originals and copies of the SOFTWARE
PRODUCT to FGL.
4. INSTALLATION AND USE OF SOFTWARE PRODUCT.
You may install and use the enclosed SOFTWARE PRODUCT on any computer under one of the operating environment identified in the
documentation accompanying the SOFTWARE. The infrastructure necessary to use the SOFTWARE PRODUCT (PC, accessories, etc.)
shall be prepared separately by you.
5. NO WARRANTY.
FGL EXPRESSLY DISCLAIMS ANY WARRANTY FOR THE SOFTWARE PRODUCT. THE SOFTWARE PRODUCT IS
PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, WITHOUT
LIMITATION, STATUTORY WARRANTIES, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR NON-
INFRINGEMENT OF THIRD PARTY’S RIGHTS. THE ENTIRE RISKS ARISING OUT OF USE OR PERFORMANCE OF THE
SOFTWARE PRODUCT REMAIN WITH YOU. HOWEVER, IF YOU NOTIFY FGL OF PHYSICAL DEFECT OF THE MEDIA
CONTAINING SOFTWARE WITHIN (90) DAYS FOLLOWING YOUR RECEIPT OF THE SOFTWARE PRODUCT, FGL WILL
REPLACE THE DEFECTIVE MEDIA WITH NEW MEDIA.
6. LIMITATION OF LIABILITY.
IN NO EVENT SHALL FGL BE LIABLE TO YOU OR TO ANY THIRD PARTY FOR ANY DIRECT OR INDIRECT DAMAGES
WHATSOEVER (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS PROFIT, BUSINESS
INTERRUPTION OR LOSS OF BUSINESS INFORMATION, DAMAGES ARISING OUT OF DATA OR INFORMATION

BACnet Gateway for VRF System INSTRUCTION MANUAL r1.4.0 eng
4/159
Copyright© 2021 Fujitsu General Limited - All rights reserved
DERIVED FROM THE SOFTWARE OR ANY OTHER PECUNIARY LOSS), ARISING OUT OF THE USE OR INABILITY TO USE
THE SOFTWARE, EVEN IF FGL HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
7. ENTIRE AGREEMENT.
This LICENSE AGREEMENT (including any addendum or amendment to this LICENSE AGREEMENT included with the SOFTWARE
PRODUCT) is the entire agreement between you and FGL relating to the SOFTWARE PRODUCT and supersedes all prior
contemporaneous oral or written communications, proposals and representations with respect to the SOFTWARE PRODUCT or any
other subject covered by this LICENSE AGREEMENT.
8. INDEMNITY.
You agree to indemnify and hold FGL, and its subsidiaries, affiliates, officers, agents, co-branders or other partners, and employees,
harmless from any damage, claim or demand, including without limitation reasonable attorneys’ fees, made by any third party due to or
arising out of use of the SOFTWARE PRODUCT.
9. GOVERNING LAW AND JURISDICTION.
This LICENSE AGREEMENT is governed by the laws of JAPAN. You and FGL hereby irrevocably consent to the exclusive jurisdiction
and venue in the Tokyo District Court and other higher courts having jurisdiction in Japan for the settlement of disputes arising under or
in connection with this LICENSE AGREEMENT.
10. LANGUAGE OF AGREEMENT.
This LICENSE AGREEMENT shall be agreed based on the English language. The text in other language is made for reference purpose
only and if there are any discrepancies between the English text and the text in other language, the English text shall prevail.

BACnet Gateway for VRF System INSTRUCTION MANUAL r1.4.0 eng
5/159
Copyright© 2021 Fujitsu General Limited - All rights reserved
Gateway for the integration of Fujitsu air conditioning systems in
BACnet/IP enabled monitoring and control systems.
Order Code:
UTY-VBGX
Model supporting up to 128 indoor units.

BACnet Gateway for VRF System INSTRUCTION MANUAL r1.4.0 eng
6/159
Copyright© 2021 Fujitsu General Limited - All rights reserved
INDEX
1Description ..........................................................................................................................................................10
1.1 Introduction..................................................................................................................................................10
1.2 Functionality ................................................................................................................................................11
1.3 Capacity of UTY-VBGX...............................................................................................................................11
2Protocol Implementation Conformance Statement.............................................................................................12
2.1 BACnet Standardized Device Profile (Annex L):.........................................................................................12
2.2 Segmentation Capability: ............................................................................................................................12
2.3 Data Link Layer Options:.............................................................................................................................12
2.4 Device Address Binding:.............................................................................................................................13
2.5 Networking Options:....................................................................................................................................13
2.6 Character Sets Supported...........................................................................................................................13
2.7 Gateway ......................................................................................................................................................13
3BACnet Interoperability Building Blocks Supported (BIBBs) ..............................................................................14
3.1 Data Sharing BIBBs ....................................................................................................................................14
3.2 Alarm and Event Management BIBBs.........................................................................................................14
3.3 Scheduling BIBBs........................................................................................................................................15
3.4 Trending BIBBs ...........................................................................................................................................16
3.5 Device and Network Management BIBBs...................................................................................................16
3.6 Network Security BIBBs ..............................................................................................................................18
4Service Types .....................................................................................................................................................19
5Objects................................................................................................................................................................20
5.1 Supported Object Types..............................................................................................................................20
5.2 Member objects...........................................................................................................................................22
5.2.1 Type: Gateway.....................................................................................................................................22
5.2.2 Type: Batch objects.............................................................................................................................22
5.2.3 Type: Indoor Unit .................................................................................................................................22
5.2.4 Type: Outdoor Unit ..............................................................................................................................23
5.3 Objects and properties ................................................................................................................................23
5.3.1 Fujitsu AC Gateway (Device Object Type) ..........................................................................................25
5.3.2 Gateway_ES_Status (Binary Input Object Type) ................................................................................27
5.3.3 Gateway_ES_Setting (Binary Output Object Type) ............................................................................29
5.3.4 Gateway_Error_Status (Binary Input Object Type).............................................................................31
5.3.5 Gateway_ErrorCode_Status (Multistate Input Object Type)...............................................................33
5.3.6 Batch_SetTemp_Setting (Analog Output Object Type).......................................................................35
5.3.7 Batch_Operation_Setting (Binary Output Object Type) ......................................................................37
5.3.8 Batch_OperationMode_Setting (Multistate Output Object Type)........................................................39
5.3.9 Batch_FanSpeed_Setting (Multistate Output Object Type) ................................................................41
5.3.10 Batch_RC_Prohibition_Setting (Multistate Output Object Type).........................................................43

BACnet Gateway for VRF System INSTRUCTION MANUAL r1.4.0 eng
7/159
Copyright© 2021 Fujitsu General Limited - All rights reserved
5.3.11 IU_rr_uu_SetTemp_Status (Analog Input Object Type)......................................................................44
5.3.12 IU_rr_uu_SpaceTemp_Status (Analog Input Object Type).................................................................46
5.3.13 IU_rr_uu_AutoTempLoLim_Status (Analog Input Object Type)..........................................................48
5.3.14 IU_rr_uu_AutoTempHiLim_Status (Analog Input Object Type) ..........................................................50
5.3.15 IU_rr_uu_CoolTempLoLim_Status (Analog Input Object Type)..........................................................52
5.3.16 IU_rr_uu_CoolTempHiLim_Status (Analog Input Object Type) ..........................................................54
5.3.17 IU_rr_uu_HeatTempLoLim_Status (Analog Input Object Type) .........................................................56
5.3.18 IU_rr_uu_HeatTempHiLim_Status (Analog Input Object Type)..........................................................58
5.3.19 IU_rr_uu_SetTemp_Setting (Analog Output Object Type)..................................................................60
5.3.20 IU_rr_uu_AutoTempLoLim_Setting (Analog Output Object Type)......................................................63
5.3.21 IU_rr_uu_AutoTempHiLim_Setting (Analog Output Object Type).......................................................65
5.3.22 IU_rr_uu_CoolTempLoLim_Setting (Analog Output Object Type)......................................................67
5.3.23 IU_rr_uu_CoolTempHiLim_Setting (Analog Output Object Type).......................................................69
5.3.24 IU_rr_uu_HeatTempLoLim_Setting (Analog Output Object Type)......................................................71
5.3.25 IU_rr_uu_HeatTempHiLim_Setting (Analog Output Object Type) ......................................................73
5.3.26 IU_rr_uu_Exists_Status (Binary Input Object Type)............................................................................75
5.3.27 IU_rr_uu_Operation_Status (Binary Input Object Type) .....................................................................77
5.3.28 IU_rr_uu_ThermostatOFF_Status (Binary Input Object Type)............................................................79
5.3.29 IU_rr_uu_FilterSign_Status (Binary Input Object Type)......................................................................81
5.3.30 IU_rr_uu_Emergency_Status (Binary Input Object Type)...................................................................83
5.3.31 IU_rr_uu_Error_Status (Binary Input Object Type) .............................................................................85
5.3.32 IU_rr_uu_TempLimValid_Status (Binary Input Object Type)..............................................................87
5.3.33 IU_rr_uu_Operation_Setting (Binary Output Object Type)..................................................................89
5.3.34 IU_rr_uu_ThermostatOFF_Setting (Binary Output Object Type)........................................................91
5.3.35 IU_rr_uu_Reset_Filter_Setting (Binary Output Object Type)..............................................................93
5.3.36 IU_rr_uu_TempLimValid_Setting (Binary Output Object Type) ..........................................................95
5.3.37 IU_rr_uu_OperationMode_Status (Multistate Input Object Type).......................................................97
5.3.38 IU_rr_uu_FanSpeed_Status (Multistate Input Object Type) ...............................................................99
5.3.39 IU_rr_uu_AirFlowDirVT_Status (Multistate Input Object Type).........................................................101
5.3.40 IU_rr_uu_AirFlowDirHZ_Status (Multistate Input Object Type).........................................................103
5.3.41 IU_rr_uu_RC_Prohibit_Status (Multistate Input Object Type)...........................................................105
5.3.42 IU_rr_uu_Managed_Mode_Status (Multistate Input Object Type)....................................................106
5.3.43 IU_rr_uu_ErrorCode_Status (Multistate Input Object Type) .............................................................108
5.3.44 IU_rr_uu_OperationMode_Setting (Multistate Output Object Type) .................................................110
5.3.45 IU_rr_uu_FanSpeed_Setting (Multistate Output Object Type)..........................................................112
5.3.46 IU_rr_uu_AitFlowDirVT_Setting (Multistate Output Object Type).....................................................114
5.3.47 IU_rr_uu_AirFlowDirHZ_Setting (Multistate Output Object Type).....................................................116
5.3.48 IU_rr_uu_RC_Prohibit_Setting (Multistate Output Object Type).......................................................118
5.3.49 OU_rr_uu_Error_Status (Binary Input Object Type) .........................................................................119
5.3.50 OU_rr_uu_ErrorCode_Status (Multistate Input Object Type)............................................................121

BACnet Gateway for VRF System INSTRUCTION MANUAL r1.4.0 eng
8/159
Copyright© 2021 Fujitsu General Limited - All rights reserved
5.3.51 OU_rr_uu_ForcedOff_Status (Binary Input Object Type) .................................................................123
5.3.52 OU_rr_uu_CapacitySave_Status (Multistate Input Object Type)......................................................125
5.3.53 OU_rr_uu_CapacitySave_Setting (Multistate Output Object Type)..................................................127
5.3.54 OU_rr_uu_ForcedOff_Setting (Binary Output Object Type)..............................................................129
5.3.55 OU_rr_uu_LowNoiseOp_Status (Multistate Input Object Type)........................................................131
5.3.56 OU_rr_uu_LowNoiseOp_Setting (Multistate Output Object Type)....................................................133
5.3.57 Notification Class Object Type ..........................................................................................................135
6Installation.........................................................................................................................................................136
6.1 Safety Precautions ....................................................................................................................................136
6.2 Wiring Requirements & Notes...................................................................................................................139
6.2.1 Electrical Requirement.......................................................................................................................139
6.3 Power device.............................................................................................................................................140
6.4 Connect to BACnet....................................................................................................................................140
6.5 Connect to Fujitsu interface.......................................................................................................................141
6.6 Connect to PC (Configuration tool) ...........................................................................................................141
7Set-up process and troubleshooting .................................................................................................................142
7.1 Pre-requisites ............................................................................................................................................142
7.2 Set-up procedure.......................................................................................................................................142
7.3 LEDs status and push buttons ..................................................................................................................143
8Configuration Tool for BACnet Gateway (UTY-VBGX).....................................................................................144
8.1 Introduction................................................................................................................................................144
8.2 Welcome screen........................................................................................................................................144
8.3 Connection ................................................................................................................................................145
8.4 Configuration.............................................................................................................................................146
8.4.1 General..............................................................................................................................................146
8.4.2 BACnet Server...................................................................................................................................147
8.4.3 Fujitsu VRF........................................................................................................................................148
8.5 Signals.......................................................................................................................................................149
8.6 Receive/Send............................................................................................................................................150
8.7 Diagnostic..................................................................................................................................................152
8.7.1 Console..............................................................................................................................................152
8.7.2 BACnet Server Viewer.......................................................................................................................152
8.7.3 Fujitsu VRF Viewer............................................................................................................................153
8.7.4 Signals Viewer...................................................................................................................................153
9AC Unit Types compatibility..............................................................................................................................154
10 Mechanical & electrical characteristics.............................................................................................................154
11 Dimensions .......................................................................................................................................................155
12 Annex................................................................................................................................................................156
12.1 Error codes................................................................................................................................................156
12.2 RC Prohibition ...........................................................................................................................................159

BACnet Gateway for VRF System INSTRUCTION MANUAL r1.4.0 eng
9/159
Copyright© 2021 Fujitsu General Limited - All rights reserved

BACnet Gateway for VRF System INSTRUCTION MANUAL r1.4.0 eng
10/159
Copyright© 2021 Fujitsu General Limited - All rights reserved
1 Description
1.1 Introduction
This document describes the integration of Fujitsu VRF air conditioning systems into BACnet compatible devices
and systems using the BACnet Gateway for VRF System.
The aim of this integration is to monitor and control your Fujitsu VRF air conditioning system, remotely, from your
Control Center using any commercial SCADA or monitoring software that includes a BACnet/IP driver. To do it so,
the BACnet Gateway for VRF System allows BACnet/IP communication, acting as a server, allowing polling or
subscription requests (COV).
The BACnet Gateway for VRF System makes available the Fujitsu air conditioning system indoor and outdoor units
and its abstraction of Fujitsu air conditioning system properties and functionalities as fixed and independent
BACnet Objects.
Simple configuration is needed: just select the appropriate communication parameters.
Up to 128 indoor units supported.
This document assumes that the user is familiar with BACnet and Fujitsu technologies and their technical terms.
Note: The 2 types of BACnet Gateway, UTY-ABGX and UTY-VBGX may not coexist within a VRF system.
BACnet/IP network
Configuration
software
VRF System
UTY-VBGX
USB
VRF
TCP/IP
TCP/IP

BACnet Gateway for VRF System INSTRUCTION MANUAL r1.4.0 eng
11/159
Copyright© 2021 Fujitsu General Limited - All rights reserved
1.2 Functionality
The gateway continuously polls (reads) the VRF network for all configured signals and keeps the updated status of
all of them in its memory, ready to be served when requested from the BACnet side.
The role of the gateway consists in associate the elements of the FGL indoor and outdoor units with BACnet
objects.
The control of the indoor and outdoor units through the FGL bus is permitted, so commands toward the FGL indoor
and outdoor units are allowed.
Each indoor and outdoor unit is offered in a set of BACnet objects.
Element
Object supported
Gateway
•Status
•Command
•Error
Indoor Unit
•Status
•Command
•Error
Outdoor Unit
•Status
•Command
•Error
1.3 Capacity of UTY-VBGX
Element Max. Notes
Number of indoor units 128 Number of indoor units that can be controlled through UTY-VBGX
Number of outdoor units 100 Number of outdoor units that can be controlled through UTY-VBGX
Number of VRF systems 1 Number of independent VRF
systems that can be controlled through
UTY-VBGX
Number of Refrigerant systems 32 Number of refrigerant systems that can be controlled through UTY-
VBGX
Number of Objects 5000 Number of FGL control and status objects available into UTY-VBGX.
The number of Indoor Units and Outdoor Units may vary on each project. These parameters can be configured
through Configuration Tool (See section 8).

BACnet Gateway for VRF System INSTRUCTION MANUAL r1.4.0 eng
12/159
Copyright© 2021 Fujitsu General Limited - All rights reserved
2 Protocol Implementation Conformance Statement
BACnet Protocol Implementation Conformance Statement (PICS)
Date: 2021-2-4
Vendor Name: Fujitsu General Limited
Product Name: BACnet Gateway for VRF System
Product Model Number: UTY-VBGX
Application Software Version: 1.1.3.0
Firmware Revision: 14.1.2.0
BACnet Protocol Revision: 14
Note. Application Software Version and Firmware Revision may change without affecting the description in this
statement.
Product Description:
BACnet Gateway for VRF System
2.1 BACnet Standardized Device Profile (Annex L):
BACnet Operator Workstation (B-OWS)
BACnet Building Controller (B-BC)
BACnet Advanced Application Controller (B-AAC)
BACnet Application Specific Controller (B-ASC)
BACnet Smart Sensor (B-SS)
BACnet Smart Actuator (B-SA)
Additional BACnet Interoperability Building Blocks Supported (Annex K):
Reference of BIBBs List
2.2 Segmentation Capability:
Segmented request supported No Yes Window Size · 16 ·
Segmented responses supported No Yes Window Size · 16 ·
2.3 Data Link Layer Options:
BACnet IP, (Annex J)
BACnet IP, (Annex J), Foreign Device
ISO 8802-3, Ethernet (Clause 7)
ANSI/ATA 878.1, 2.5 Mb. ARCNET (Clause 8)
ANSI/ATA 878.1, RS-485 ARCNET (Clause 8), baud rate(s) ____
MS/TP master (Clause 9), baud rate(s):
MS/TP slave (Clause 9), baud rate(s):
Point-To-Point, EIA 232 (Clause 10), baud rate(s):
Point-To-Point, modem, (Clause 10), baud rate(s):
LonTalk, (Clause 11), medium: _____
Other:

BACnet Gateway for VRF System INSTRUCTION MANUAL r1.4.0 eng
13/159
Copyright© 2021 Fujitsu General Limited - All rights reserved
2.4 Device Address Binding:
Is static device binding supported? (This is currently necessary for two-way communication with
MS/TP slaves and certain other devices.) Yes No
2.5 Networking Options:
Router, Clause 6 - List all routing configurations, e.g., ARCNET-Ethernet, Ethernet-MS/TP, etc.
Annex H, BACnet Tunneling Router over IP
BACnet/IP Broadcast Management Device (BBMD)
Does the BBMD support registrations by Foreign Devices? Yes No
2.6 Character Sets Supported
Indicating support for multiple character sets does not imply that they can all be supported simultaneously.
ISO 10646 (UTF-8) IBM/MicrosoftDBCS ISO 8859-1
ISO 10646 (UCS-2) ISO 10646 (UCS-4) JIS X 0208
2.7 Gateway
If this product is a communication gateway, describe the types of non-BACnet equipment/network(s) that the
gateway supports:
Fujitsu VRF Air Conditioning Network.

BACnet Gateway for VRF System INSTRUCTION MANUAL r1.4.0 eng
14/159
Copyright© 2021 Fujitsu General Limited - All rights reserved
3 BACnet Interoperability Building Blocks Supported (BIBBs)
3.1 Data Sharing BIBBs
BIBB Type Active BACnet Service Initiate Execute
DS-RP-A
Data Sharing-ReadProperty–A
ReadProperty
DS-RP-B
Data Sharing-ReadProperty–B
ReadProperty
DS-RPM-A
Data Sharing-ReadPropertyMultiple–A
ReadPropertyMultiple
DS-RPM-B
Data Sharing-ReadPropertyMultiple–B
ReadPropertyMultiple
DS-WP-A
Data Sharing-WriteProperty–A
WriteProperty
DS-WP-B
Data Sharing-WriteProperty–B
WriteProperty
DS-WPM-A
Data Sharing-WritePropertyMultiple–A
WritePropertyMultiple
DS-WPM-B
Data Sharing-WritePropertyMultiple–B
WritePropertyMultiple
DS-COV-A Data Sharing-COV–A
SubscribeCOV
ConfirmedCOVNotification
UnconfirmedCOVNotification
DS-COV-B Data Sharing-COV–B
SubscribeCOV
ConfirmedCOVNotification
UnconfirmedCOVNotification
DS-COVP-A Data Sharing-COVP–A
SubscribeCOVProperty
ConfirmedCOVNotification
UnconfirmedCOVNotification
DS-COVP-B Data Sharing-COVP–B
SubscribeCOVProperty
ConfirmedCOVNotification
UnconfirmedCOVNotification
DS-COVU-A
Data Sharing-COV-Unsubscribed–A
UnconfirmedCOVNotification
DS-COVU-B
Data Sharing-COV- Unsubscribed -B
UnconfirmedCOVNotification
DS-V-A
Data Sharing-View-A
ReadProperty
DS-AV-A
Data Sharing-Advanced View-A
ReadProperty
DS-M-A
Data Sharing-Modify-A
WriteProperty
DS-AM-A
Data Sharing-Advanced Modify-A
WriteProperty
DS-WG-A
Data Sharing-WriteGroup-A
WriteGroup
DS-WG-I-B
Data Sharing-WriteGroup-Internal-B
WriteGroup
DS-WG-E-B Data Sharing-WriteGroup-External-B
WriteGroup
WriteProperty
3.2 Alarm and Event Management BIBBs
BIBB Type Active BACnet Service Initiate Execute
AE-N-A Alarm and Event-Notification–A
ConfirmedEventNotification
UnconfirmedEventNotification
AE-N-I-B Alarm and Event-Notification Internal–B
ConfirmedEventNotification
UnconfirmedEventNotification
AE-N-E-B Alarm and Event-Notification External–B
ConfirmedEventNotification
UnconfirmedEventNotification
AE-ACK-A
Alarm and Event-ACK–A
AcknowledgeAlarm
AE-ACK-B
Alarm and Event-ACK–B
AcknowledgeAlarm
AE-ASUM-A
Alarm and Event-Alarm Summary–A
GetAlarmSummary
AE-ASUM-B
Alarm and Event-Alarm Summary–B
GetAlarmSummary
AE-ESUM-A
Alarm and Event-Enrollment Summary-A
GetEnrollmentSummary
AE-ESUM-B
Alarm and Event-Enrollment Summary-B
GetEnrollmentSummary
AE-INFO-A
Alarm and Event-Information–A
GetEventInformation
AE-INFO-B
Alarm and Event-Information–B
GetEventInformation
AE-LS-A Alarm and Event-LifeSafety–A
LifeSafetyOperation
ConfirmedEventNotification
UnconfirmedEventNotification
AcknowledgeAlarm

BACnet Gateway for VRF System INSTRUCTION MANUAL r1.4.0 eng
15/159
Copyright© 2021 Fujitsu General Limited - All rights reserved
AE-LS-B Alarm and Event-LifeSafety–B
LifeSafetyOperation
ConfirmedEventNotification
UnconfirmedEventNotification
AE-VN-A Alarm and Event Management-Vew
Notifications-A
ConfirmedEventNotification
UnconfirmedEventNotification
AE-AVN-A Alarm and Event Management-Advanced
View Notifications-A
ConfirmedEventNotification
UnconfirmedEventNotification
AE-VM-A Alarm and Event Management-
View and
Modify-A
ReadProperty
WriteProperty
AE-AVM-A Alarm and Event Management-Advanced
View and Modify-A
CreateObject
DeleteObject
ReadProperty
WriteProperty
AE-AS-A Alarm and Event Management-Alarm
Summary View-A
GetEventInformation
GetEnrollmentSummary
GetAlarmSummary
AE-ELV-A
Alarm and Event Management-Event Log
View-A
ReadRange
AE-ELVM-A Alarm and Event Management-
Event Log
View and Modify-A
ReadRange
ReadProperty
WriteProperty
AE-EL-I-B
Alarm and Event Management-Event Log-
Internal-B
ReadRange
AE-EL-E-B Alarm and Event Management-Event Log-
External-B
ReadRange
ConfirmedEventNotification
UnconfirmedEventNotification
AE-NF-B Alarm and Event Management-Notification
Forwarder-B
ConfirmedEventNotification
UnconfirmedEventNotification
AddListElement
RemoveListElement
AE-NF-I-B Alarm and Event Management-Notification
Forwarder-Internal-B
ConfirmedEventNotification
UnconfirmedEventNotification
AddListElement
RemoveListElement
3.3 Scheduling BIBBs
BIBB Type Active BACnet Service Initiate Execute
SCHED-I-B
Scheduling-Internal–B
(shall support DS-RP-B and DS-WP-B)
(shall also support ether DM-TS-B or DS-
UTC-B)
SCHED-E-B
Scheduling-External–B
(shall support SCHED-I-B and DS-WP-A)
SCHED-R-B
Scheduling-Readonly-B
(support DS-RP-B and either DM-TS-B or
DM-UTC-B)
SCHED-AVM-A Scheduling-Advanced View and Modify-A
CreateObject
DeleteObject
ReadProperty
WriteProperty
SCHED-VM-A Scheduling-View and Modify-A
ReadProperty
WriteProperty
SCHED-WS-A Scheduling-Weekly Schedule-A
ReadProperty
WriteProperty
SCHED-WS-I-B Scheduling-Weekly Schedule Internal-B
ReadProperty
WriteProperty
TimeSynchronization
UTCTimeSynchronization

BACnet Gateway for VRF System INSTRUCTION MANUAL r1.4.0 eng
16/159
Copyright© 2021 Fujitsu General Limited - All rights reserved
3.4 Trending BIBBs
BIBB Type Active BACnet Service Initiate Execute
T-VMT-I-B
Trending - Viewing and Modifying Trends
Internal–B
ReadRange
T-VMT-E-B
Trending - Viewing and Modifying Trends
External–B
ReadRange
T-ATR-A Trending - Automated Trend Retrieval–A
ConfirmedEventNotification
UnconfirmedEventNotification
ReadRange
T-ATR-B Trending - Automated Trend Retrieval–B
ConfirmedEventNotification
UnconfirmedEventNotification
ReadRange
T-VMMV-I-B
Trending - Viewing and Modifying Multiple
Values Internal-B
ReadRange
T-VMMV-E-B Trending -
Viewing and Modifying Multiple
Values External-B
ReadRange
ReadPropertyMultiple
T-AMVR-A Trending -
Automated Multiple Value
Retrieval-A
ConfirmedEventNotification
UnconfirmedEventNotification
ReadRange
T-AMRV-B Trending -
Automated Multiple Value
Retrieval-B
ConfirmedEventNotification
UnconfirmedEventNotification
ReadRange
T-V-A
Trending - View-A
ReadRange
T-AVM-A Trending - Advanced View and Modify-A
CreateObject
DeleteObject
ReadProperty
ReadRange
WriteProperty
T-A-A Trending - Archival-A
T-ATR-A
T-AMRV-A
3.5 Device and Network Management BIBBs
BIBB Type Active BACnet Service Initiate Execute
DM-DDB-A Device Management -
Dynamic Device
Binding–A
Who-Is
I-Am
DM-DDB-B Device Management -
Dynamic Device
Binding–B
Who-Is
I-Am
DM-DOB-A Device Management -
Dynamic Object
Binding–A
Who-Has
I-Have
DM-DOB-B Device Management -
Dynamic Object
Binding–B
Who-Has
I-Have
DM-DCC-A
Device Management -
DeviceCommunicationControl–A
DeviceCommunicationControl
DM-DCC-B
Device Management -
DeviceCommunicationControl–B
DeviceCommunicationControl
DM-TM-A Device Management - Text Message–A
ConfirmedTextMessage
UnconfirmedTextMessage
DM-TM-B Device Management - Text Message–B
ConfirmedTextMessage
UnconfirmedTextMessage
DM-TS-A
Device Management -
TimeSynchronization–A
TimeSynchronization
DM-TS-B
Device Management -
TimeSynchronization–B
TimeSynchronization
DM-UTC-A
Device Management -
UTCTimeSynchronization–A
UTCTimeSynchronization

BACnet Gateway for VRF System INSTRUCTION MANUAL r1.4.0 eng
17/159
Copyright© 2021 Fujitsu General Limited - All rights reserved
DM-UTC-B
Device Management -
UTCTimeSynchronization–B
UTCTimeSynchronization
DM-RD-A
Device Management - ReinitializeDevice–A
ReinitializeDevice
DM-RD-B
Device Management - ReinitializeDevice–B
ReinitializeDevice
DM-BR-A Device Management - Backup and Restore–
A
AtomicReadFile
AtomicWriteFile
CreateObject
ReinitializeDevice
DM-BR-B Device Management - Backup and Restore–
B
AtomicReadFile
AtomicWriteFile
ReinitializeDevice
DM-R-A
Device Management - Restart–A
UnconfimedCOVNotification
DM-R-B
Device Management - Restart–B
UnconfimedCOVNotification
DM-LM-A Device Management - List Manipulation–A
AddListElement
RemoveListElement
DM-LM-B Device Management - List Manipulation–B
AddListElement
RemoveListElement
DM-OCD-A Device Management - Object Creation and
Deletion–A
CreateObject
DeleteObject
DM-OCD-B Device Management - Object Creation and
Deletion–B
CreateObject
DeleteObject
DM-VT-A Device Management - Virtual Terminal–A
VT-Open
VT-Close
VT-Data
DM-VT-B Device Management - Virtual Terminal–B
VT-Open
VT-Close
VT-Data
NM-CE-A Network Management - Connection
Establishment–A
Establish-Connection-To-
Network
Disconnect-Connection-To-
Network
NM-CE-B Network Management - Connection
Establishment– B
Establish-Connection-To-
Network
Disconnect-Connection-To-
Network
NM-RC-A Network Management - Router
Configuration–A
Who-Is-Router-To-Network
I-Am-Router-To-Network
I-Could-Be-Router-To-Network
Initialize-Routing-Table
Initialize-Routing-Table-Ack
NM-RC-B Network Management - Router
Configuration–B
Who-Is-Router-To-Network
I-Am-Router-To-Network
Initialize-Routing-Table
Initialize-Routing-Table-Ack
DM-ANM-A Device Management-
Automatic Network
Mapping-A
DM-DDB-B
DM-DDB-A
DM-ADM-A Device Management-
Automatic Device
Mapping-A
DS-RP-A
DM-ADM-A
DM-ATS-A Device Management-
Automatic Time
Synchronization-A
TimeSynchronization
UTCTimeSynchronization
DM-ATS-A
DM-MTS-A Device Management-
Manual Time
Synchronization-A
TimeSynchronization
UTCTimeSynchronization

BACnet Gateway for VRF System INSTRUCTION MANUAL r1.4.0 eng
18/159
Copyright© 2021 Fujitsu General Limited - All rights reserved
3.6 Network Security BIBBs
BIBB Type Active BACnet Service Initiate Execute
NS-SD Network Security-Secure Device
Challenge-Request
Security-Payload
Security-Response
Request-Key-Update
Update-Key-Set
Update-Distribution-Key
What-Is-Network-Number
Network-Number-Is
NS-ED
Network Security-Encrypted Device
NS-SD
NS-MAD
Network Security-Multi-Application Device
NS-ED
NS-DMK-A Network Security-Device Master Key-A
Request-Master-Key
Set-Master-Key
NS-DMK-B Network Security-Device Master Key-B
Request-Master-Key
Set-Master-Key
NS-KS Network Security-Key Server
Request-Key-Update
Update-Key-Set
Update-Distribution-Key
Request-Master-Key
Set-Master-Key
NS-SD
NS-DMK-A
NS-TKS Network Security-Temporaty Key Server
Request-Key-Update
Update-Key-Set
Update-Distribution-Key
Request-Master-Key
Set-Master-Key
NS-SD
NS-DMK-A
NS-SR Network Security-Secure Router
NS-SD
NS-ED
NS-SP
Network Security-Security Proxy
NS-SR

BACnet Gateway for VRF System INSTRUCTION MANUAL r1.4.0 eng
19/159
Copyright© 2021 Fujitsu General Limited - All rights reserved
4 Service Types
Service type Service name Supported Remarks
Alarm and Event
Services
AcknowledgeAlarm
ConfirmedCOVNotification
ConfirmedEventNotification
GetAlarmSummary
GetEnrollmentSummary
SubscribeCOV
File Access Services
AtomicReadFile
AtomicWriteFile
Object Access
Services
AddListElement
RemoveListElement
CreateObject
DeleteObject
ReadProperty
ReadPropertyConditional
ReadPropertyMultiple
ReadRange
WriteGroup
WriteProperty
WritePropertyMultiple
Remote Device
Management
Services
DeviceComminicationControl
ConfirmedPrivateTransfer
ConfirmedTextMessage
ReinitializeDevice
Virtual Terminal
Services
VtOpen
VtClose
VtData
Security Services
Authenticate
RequestKey
Unconfirmed
Services
I-Am
I-Have
UnconfirmedCOVNotification
UnconfirmedEventNotification
UnconfirmedPrivateTransfer
UnconfirmedTextMessage
TimeSynchronization
UtcTimeSynchronization
Who-Has
Who-Is
LifeSafetyOperation
SubscribeCOVProperty
GetEventInformation

BACnet Gateway for VRF System INSTRUCTION MANUAL r1.4.0 eng
20/159
Copyright© 2021 Fujitsu General Limited - All rights reserved
5 Objects
5.1 Supported Object Types
The objects supported are shown in the table below.
Object Type ID Supported Management Point
Analog-Input 0
IU_rr_uu_SetTemp_Status
IU_rr_uu_SpaceTemp_Status
IU_rr_uu_AutoTempLoLim_Status
IU_rr_uu_AutoTempHiLim_Status
IU_rr_uu_CoolTempLoLim_Status
IU_rr_uu_CoolTempHiLim_Status
IU_rr_uu_HeatTempLoLim_Status
IU_rr_uu_HeatTempHiLim_Status
Analog-Output 1
Batch_SetTemp_Setting
IU_rr_uu_SetTemp_Setting
IU_rr_uu_AutoTempLoLim_Setting
IU_rr_uu_AutoTempHiLim_Setting
IU_rr_uu_CoolTempLoLim_Setting
IU_rr_uu_CoolTempHiLim_Setting
IU_rr_uu_HeatTempLoLim_Setting
IU_rr_uu_HeatTempHiLim_Setting
Analog-Value 2
Binary-Input 3
Gateway_ES_Status
Gateway_Error_Status
IU_rr_uu_Exists_Status
IU_rr_uu_Operation_Status
IU_rr_uu_ThermostatOFF_Status
IU_rr_uu_FilterSign_Status
IU_rr_uu_Emergency_Status
IU_rr_uu_Error_Status
IU_rr_uu_TempLimValid_Status
OU_rr_uu_Error_Status
OU_rr_uu_ForcedOff_Status
Binary-Output 4
Gateway_ES_Setting
Batch_Operation_Setting
IU_rr_uu_Operation_Setting
IU_rr_uu_ThermostatOFF_Setting
IU_rr_uu_Reset_Filter_Setting
IU_rr_uu_TempLimValid_Setting
OU_rr_uu_ForcedOff_Setting
Binary-Value 5
Calendar 6
Command 7
Device 8 UTY-VBGX
Event-Enrollment 9
File 10
Group 11
Loop 12
Multistate-Input 13
Gateway_ErrorCode_Status
IU_rr_uu_OperationMode_Status
IU_rr_uu_FanSpeed_Status
IU_rr_uu_AirFlowDirVT_Status
IU_rr_uu_AirFlowDirHZ_Status
IU_rr_uu_RC_Prohibit_Status
IU_rr_uu_ErrorCode_Status
IU_rr_uu_Managed_Mode_Status
OU_rr_uu_ErrorCode_Status
OU_rr_uu_CapacitySave_Status
OU_rr_uu_LowNoiseOp_Status