fully Jarvis User manual

Jarvis bamboo adjustable
keyboard tray
Assembly instructions
For assembly assistance,
call 888-508-3725
or email [e-mail]

Cautions
Read the entire instruction manual before you start
installation and assembly. If you have any questions
regarding any of the instructions or warnings, please
contact Fully for assistance.
Use with products heavier than the rated
weights indicated may result in instability
causing personal injury.
Always be sure the tilt adjustment clamp lever is
secure before use. Avoid placing extraneous items
on the keyboard tray.
Mounts must be attached as specified in
assembly instructions. Improper installation may
result in damage or serious personal injury.
Safety gear and proper tools must be used.
Make sure that the supporting surface will safely
support the combined weight of the equipment
and all attached hardware and components.
Use the mounting screws provided and DO NOT
OVER TIGHTEN mounting screws.
This product contains small items that could be
a choking hazard if swallowed. Keep these items
away from children.
This product is intended for indoor use only.
Using this product outdoors could lead to product
failure and personal injury.
Important: Ensure that you have received all parts
according to the component checklist prior
to installation. If any parts are missing or faulty,
telephone your local distributor for a replacement.
Maintenance: Check that the bracket is secure
and safe to use at regular intervals (at least every
three months).
Jarvis is a registered trademark of Fully, LLC.
All rights reserved.
A
B
C
D
E
F
G
x2
x6
x4
In the box
2

Assembly
Step 1
B
Step 2
F (x6)
3

Step 4
Step 3
C
4

Step 5
A D G (x4)
Step 6
E (x2)
5

Step 7
6

Contact
Fully
Portland, Oregon
888-508-3725
[e-mail]
www.fully.com

version 091018a
Desks, chairs & things
to keep you moving