Fulmo 31340177 User manual

Read the instructions carefully before first use and maintenance.
18'' INSERTABLE FIREPLACE UNIT
THANK YOU FOR TRUSTING US AND CHOOSING OUR PRODUCT!
CATEscan the QR code, search for your product on
the web and download the manual in Catalan.
PT Scan the QR code, search for your product on the
web and download the manual in Portuguese.
ENScan the QR code, search for your product on the web
and download the manual in English.
FULMO.ES @FULMO_
FULMO.ES @FULMO_

2
INDEX
1. CUTTING AND CONTENTS OF THE BOX 3
2. ASSEMBLY 4
3. GUARANTEE 15
1. EXPLODED VIEW AND CONTENTS OF
THE BOX

3
CONTENTS OF THE BOX
N.
DESCRIPTION QUANTITY
Top panel
Upper sides
Front base
Fixed shelves
Central crossbeam
Lower side panel
Intermediate vertical stop
Rear rail
Pillow
Front left column
Front right column
Bottom stop
Base

4
Step 1
Step 2
STEP 1
2. ASSEMBLY
STEP 2

5
Step 3
Step 4
STEP 4
STEP 3

6
Step 5
Step 6
STEP 6
STEP 5

7
Step 7
Step 8
STEP 8
STEP 7

8
Step 9
Step 10
STEP 10
STEP 9

9
Step 11
Step 12
STEP 12
STEP 11

10
Step 13
Step 14
STEP 14
STEP 13

11
Step 15
Step 16
STEP 16
STEP 15

12
Step 17
Step 18
STEP 18
STEP 17

13
Step 19
Step 20
STEP 20
STEP 19

14
Step 21
Step 22
FIREPLACE INSTALLATION
If you decide to install the ¿replace into the mantel, carefully set the unit
fr the mantel and centre it in the opening.Check the Alignment and attach the
unit to the mantel by inserting screws through the drilled holes on the trim
to the mant NOTE: Do not attempt to install the unit from the front of the
mantel. It will n
STEP 21
STEP 22
If you choose to install the 18'' Insertable Fireplace, carefully position the unit from the
mantel and center it in the opening. Check alignment and secure the 18'' Insertable
Fireplace to the mantel by inserting screws through the holes drilled in the trim. NOTE:
Do not attempt to install the unit from the front of the mantel. It will not be possible to
install it.

15
3. GUARANTEE
All products are guaranteed by AVANZZA TRADERS INTERNATIONAL S.L. for a period of 3
years from the date of purchase, according to the General Law for the Defence of Consumers
and Users, with the exception of 1 YEAR* for batteries and battery chargers. However, when
the lack of conformity becomes apparent after 6 months, the consumer must prove that the
defect existed from the beginning, and can only do so by means of independent expert
reports. The warranty period starts on the date of purchase. The original purchase invoice,
showing the date and model name, will be the proof of purchase that will allow you to prove
the date, a n d i t is essential to enclose a copy. With this type of equipment it is normal to
suffer knocks and accidents that may leave an externally non-visible after-effect of the
accident that has occurred. Also, failure to properly assemble and adjust the product before
use can cause a malfunction or even an accident. Before thinking that your product is
defective, you should check that you are using i t correctly and properly and that you are
familiar with the operating instructions. A good adjustment and maintenance of the appliance
are essential to avoid a future breakdown.
the official technical service in spain for all fulmo brand products is operated by microtecnic, where the
user must take their product to be overhauled, serviced or possibly damaged.
all repairs under warranty
will be carried out by microtecnic, and previously reviewed by
the technical service, which will
determine the possible faults of the product in order to determine compliance with the warranty. any
fulmo product that has been altered, opened, manipulated or
modified by personnel outside of
microtecnic will automatically lose any type of guarantee. in the event that the owner of the product is
unable to visit microtecnic establishments, he/she
should send a message to [email protected], where
he/she will receive instructions on the procedure to follow.
This warranty covers the end user with normal use of the product and against manufacturing
defects in the product. NEVER for:
-Products which have been used for any function other than that for which they were originally
intended (commercial use, rental, etc.).
-Items without original packaging or proof of purchase.
- Defects or damage due to incorrect use or handling of the equipment (such as electrical
damage, overloading or incorrect power supply, etc.).
-Wear and tear of consumables such as batteries, filters, membranes, etc., and aesthetic
damage.
- Reduced functionality (reduced battery life, etc.) due to exceeding their design limitations
(overloading, excessive use, inappropriate use, etc.).

16
- Damage caused by excessive humidity, rain, snow and/or any situation caused by liquids or
inadequate storage conditions that may affect the watertightness of the product.
- Defects or damage due to lack of maintenance, adjustment, or any other reason attributable
to improper care on the part of the user.
- Wear or breakage caused by modifications made to obtain maximum performance, and
exceeding the limits of the machine, typical of inappropriate use, thus causing greater and faster
wear, overheating and breakage of parts, etc.
- Wear and tear or damage caused by misuse.
- Products with altered, modified or removed serial numbers.
- Products using spare parts other than the original manufacturer's brand, and installed by
personnel outside the official technical service operated by MICROTECNIC.
- Defects or damage due to incorrect packaging prior to transport to the service centre.
-Damage caused by vandalism and/or force majeure.
- Products handled by personnel outside the MICROTECNIC Technical Assistance Service.
- Products with parameters different from the factory settings.
This warranty DOES cover the cost of spare parts and labour for repairs necessary to restore
the product to full working order in the following cases:
- Failure of parts or components caused by a manufacturing defect.
- Products that do not work when they arrive at their destination. Sincerely,
the FULMO team.