www.fultererusa.com page 2 of 2
Mounting Instructions
FR 1600 Keyboard Pull-Out
FR 1601 Keyboard Pull-Out, wide
FR 1602 Keyboard Pull-Out – with Slide-Out Mouse Tray
mm (in.)
Top View
Fasteners Supplied
(E) 12 pcs. #6 x 5/8 black flathead countersunk screws
(H) 12 pcs. #6 x 5/8 black panhead countersunk screws
1. Adhere two pieces of double-sided tape (B) (not supplied) lengthwise
to board (A). See diagram 1.
2. Insert board (A) underneath keyboard tray (C). Press firmly to make
double-sided tape adhere securely to the keyboard tray (C).
See diagram 1.
3. Fasten left and right drawer profile parts (D) to the tray and board
with wood screws (E). See diagram 1.
All models FR1600, FR1601 and FR1602 mount identically to the bottom of the work surface.
All models FR1600, FR1601 and FR1602 feature a soft, comfortable gel wrist support.
The FR1602 includes a soft-cushioned mouse pad which can be placed on the left
or right hand side of the slide-out tray.
4. Hook top-mount brackets (F) to cabinet profiles (G) as
illustrated (1 and 2).
5. Mark the position of the bracket screw holes as indicated
on diagram 2 and fasten with wood screws (H). Be sure
to mount square and perpendicular allowing enough play
for the drawerslide to operate without binding.
6. After inserting the tray, slide the over-run prevention clip (I)
forward to lock into place. See diagram 3.
