FUNAI B1-M110 User manual

1VMN????? / E5J20ED
EN
© 2008-2009 FUNAI EUROPE GMBH. All rights reserved. EN
1In stop mode, press SETUP.
2Use Kor Lto select , then press ENTER.
3Use Kor Lto select “Player Menu”, then press ENTER.
4Select your desired language, then press ENTER.
5Press SETUP to exit.
1Press STANDBY-ON.
2Turn on the TV and select the appropriate input on the TV to which the unit is connected.
3Press OPEN/CLOSE Ato open disc tray.
4Place the disc on the disc tray with its label side facing up.
5Press OPEN/CLOSE Ato close the disc tray.
It may take a while to load the disc.
• Some discs may start playback automatically.
6Press PLAY Bto start playback.
• For many of BD-video and DVD-video, a menu screen may appear.
• In this case, use K/ L/ {/ Bto select the desired item, then press ENTER.
To pause playback:
Press PAUSE k.
To return to normal playback:
Press PLAY B.
To stop playback:
Press STOP C.
To eject the disc:
Press OPEN/CLOSE Ato open the disc tray, then remove the disc before turning off the unit.
Quick Setup Guide B1-M110
This unit is compatible to play back the following discs / files.
This unit has been designed to play back BD-video with region “B” and DVD-video with region “2” or “ALL”. You cannot
play back BD-video or DVD-video that are labelled for other regions. Look for the symbols on the right on your BD-video or
DVD-video. If these region symbols do not appear on your BD-video or DVD-video, you cannot play back the disc in this
unit. The letter or number inside the globe refers to region of the world. A BD-video or DVD-video labelled for a specific
region can only be played back in the unit with the same region code.
Initial Setups
Playback
Media Select
HDMI Audio Out
HDMI Video Resolution
Component Output
Player Menu
Quick
Disc
HDMI Multi(Normal)
Auto
480i/576i
English
Align the disc to the disc
tray guide.
Playable Discs and Files
Region Codes
“Blu-ray Disc” and are trademarks.
is a trademark of DVD Format / Logo Licensing
Corporation.
Playable discs Logos
Blu-ray Disc
- BD-video (single / double layer)
- BD-RE ver.2.1 (single / double layer)
(Recorded in BDMV format)
- BD-R (single / double layer) (Recorded
in BDMV format) (Unclosed discs may
not be played back.)
DVD-video
DVD-RW (finalised discs only)
DVD-R (finalised discs only)
CD-DA (audio CD)
CD-RW
CD-R
Kodak Picture CD
DTS-CD —
• DivX, DivX Certified, and associated logos are
trademarks of DivX, Inc. and are used under licence.
• Windows Media and the Windows logo are trademarks or
registered trademarks of Microsoft Corporation in the
United States and / or other countries.
• For miniSD Card and microSD Card, the adapter is
necessary.
Playable files Logos Media
MP3 —DVD-RW / -R
CD-RW / -R
SD Memory Card
(including SDHC)
miniSD Card
microSD Card
Windows Media™
Audio
JPEG —
DivX®DVD-RW / -R
CD-RW / -R
Readable cards Playable files / data
SD Memory Card (8MB - 2GB) MP3, Windows Media™ Audio,
JPEG, picture-in-picture
commentary, subtitles or other
extras for BD-ROM Profile 1
ver.1.1 (also known as
“BONUSVIEW”)
SDHC Memory Card (4GB)
miniSD Card (8MB - 2GB)
microSD Card (8MB - 2GB)
microSD Card adapter
microSD Card
miniSD Card adapter
miniSD Card
E2G22ED_QSG_EN.fm Page 1 Wednesday, June 25, 2008 3:48 PM

EN EN
Make one of the following connections, depending on the capabilities of your existing device.
Press HDMI to change the resolution of the video signal being output from HDMI OUT jack.
The video resolution changes as follows every time HDMI is pressed.
Note
• You cannot select the video resolutions which are not supported by the connected TV.
• In order to get natural and high quality film reproduction of 24-frame film material, use an HDMI cable (High Speed HDMI
Cable is recommended) and select “1080p24” if the connected TV is compatible with 1080p24 frame input.
2-Channel Analogue Audio Connection
Digital Audio Connection
After making all the necessary connections, connect the AC cord to the AC IN.
Then connect the AC cord to the AC outlet.
Insert the plugs securely. Incomplete connections will result in the generation of noise.
Basic Connections
HDMI Connection
COMPONENT
VIDEO OUT
P B /C B
P R /C R Y
COMPONENT
VIDEO IN
Y
PB/CB
PR/CR
AUDIO IN
LR
VIDEO
OUT
VIDEO
IN
DVI IN
(Red)
(Blue)
(Green)
AUDIO CONNECTION VIDEO CONNECTION
Method 1
TV
this unit
Method 2 Method 3
and or or
RCA audio cable
(supplied)
RCA
video cable
(supplied) RCA component
video cable
(not supplied)
HDMI-DVI
cable
(not supplied)
standard audio standard picture better picture best picture
OR
HDMI IN
AUDIO / VIDEO CONNECTION Method 4
HDMI cable (not supplied)
best audio / picture TVthis unit
480p/576p 720p 1080i 1080p 1080p2
4
Connection to an Audio System
Connecting the AC Cord
AUDI O
OUT
L
R
AUDIO IN
LR
analogue audio input jacks
RCA audio cable (supplied)
stereo system
this unit
audio
COAXIAL
DIGITAL AUDIO INPUT
digital audio coaxial input jack
digital audio coaxial cable
(not supplied)
AV receiver / amplifier
this unit
audio
this unit
AC outlet
AC cord
(supplied)
AC 110-240V , 50 Hz
WARNING! DO NOT change connections while power is on.
Before installation, unplug your TV and this unit.
E2G22ED_QSG_EN.fm Page 2 Wednesday, June 25, 2008 3:48 PM