Furn Mill HOBED00122 User manual

ASSEMBLY INSTRUCTION
NIRVANA BED WITH STORAGE(King size
and Queen size)
ASSEMBLY RATING
TheAssembly Rating is a 5-point
system that shows the degree of effort
needed in assembling aspecific
product (with 1being easy and 5being
difficult).
For most products, two
persons are recommended.
EASYDIFFICULT
PRODUCT CODE: HOBED00122
HOBED00123
Requirement for Assembly
1/10
2 PERSONS RECOMMENDED

HARDWARE QTY.
HARDWARE DETAIL ASSEMBLED PRODUCT
2/10
Screw 16 mm 48 nos
L-patti 40x40mm 8 nos

3/10
STEP01
Fix the Part -A(Headboard) and Part-C(Sideboard) on using L-plate with the help of
Screw 16mm as shown in fig.
STEP02
Fix the Part-H (Footboard) and last assembled part with L-plate and screws as shown in fig.

4/10
Now place Part-E (Battens) at bottom U-block as shown in Fig.
STEP03
STEP04
Now Place Part-G(Bottom Panel) into last assembled part as shown in fig.

5/10
STEP05
STEP06
Now place battens in U-block of Part-D(Middle panel) and fix Part -D with Part-
A (Headboard) and Part-H(Footboard) by L-patti and screws 16mm at position
A1 and A2 respectively as shown in fig.
Note: You can remove
Solid block support
after this step.
Now place Part-E (Battens) at bottom U-block as shown in Fig.
Support
Block for strip

6/10
STEP07
STEP08
Now place Part-G (Bottom Panel) with last assembled part as shown in Fig.
Note: You can remove
Solid block support
after this step.
Now place battens in U-block of Part-C(Side panel) and fix Part -C with Part-A
(Headboard) and Part-H(Footboard) by L-plate and screws 16mm at position B1 and
B2 respectively as shown in fig.

7/10
STEP09
Fix the Part -F(Middle partition) with last assembled part using l-patti with the help of
screw at defined position C1 and C2 asshown in Fig.

8/10
Now fix Part-E (Battens) at upper U-block as shown in Fig.
Now place Part-B (Top strips) and Part-I(Top panel) at last assembled as shown in Fig.
STEP11
STEP10
Strip

9/10
Now rotate or open Part-I (Seat panel) towards left as shown in Fig.
Your Bed is ready.
STEP11
STEP12

Thank you for your purchase!
We hope you will enjoy your new product for many years to come. Our commitment to providing quality products does
not simply end when a purchase is made. We stand behind our products and will provide any support needed in order for
you to fully enjoy your purchase. Your satisfaction is the greatest recognition we could have.
Because we value your trust in our company, we will do our best to meet your service expectations. Should you have any
assembly related questions, parts replacement requests, comments or suggestions, please feel free to contact us any time.
To help expedite the service, please have the assembly instructions available, along with your order receipt.
Note :
Do not dispose of any packaging or contents of the shipping carton until assembly is completed to avoid
accidentally discarding small parts or hardware.
CARE INSTRUCTIONS
Clean
Dust off with a soft, dry cloth and vacuum your upholstery regularly
For wiping, use a mild cleansing agent. On surfaces, do not use harsh agents which contain ammonia or bleach.
Don’t forget to give your cushions a good shake every week or so to help them keep their
shape.
For a full cleanse of upholstered furniture, we recommend professional cleaning by a
certified company that can come to your home.
If your design has removable covers you can take it along to your local dry cleaner.
Stains
Take care of spills immediately. Absorb the spill with a clean white cloth or paper towel.
Gently dab the surface and lift the stains.
For linen and cotton-blend fabrics that are more heavily dyed, bear in mind that spot cleaning may lift the dye
leaving a lighter patch.
In the case of fabrics such as Velvet, be sure to never scrub the fabric harshly. Velvet, is
very sensitive to liquids and should be kept dry at all times. It should be professionally dry-
cleaned only.
If you spill on a Leatherette surface, the best thing to do is wipe up the spill immediately using a damp cotton or wool cloth and
then dry using a clean soft cloth.
In some cases you may not be able to remove a stain by simply wiping the leatherette with warm water. In these cases you will
need to use a soap and water mixture. In a small bowl, combine warm water with a tablespoon of mild dish soap or hand soap
and wipe the stained area with a soft cotton cloth using the soap mixture.
After you have wiped the entire surface with soapy water, take a new cloth and dip it in a bowl of plain water. This will help to
rinse away any soap that remains on the leatherette. Once the leatherette has been rinsed, use a clean dry cloth to dry the surface.
Dab the cloth over the entire surface until it is completely dry.
Note : You can use a cotton-swab to clean hard-to-reach areas instead of a dry cloth.
Avoid
Keep the furniture away from direct sunlight and away from heat sources; excessive
exposure to sunlight may fade the colour of the upholstery.
Avoid placing heavy or sharp objects on the furniture surface for long periods of time; this
can cause permanent indentations on the fabric.
To protect furniture from moisture, avoid placing the furniture in direct contact with damp
walls. In case of contact, wipe the furniture promptly with a dry, soft and lint-free cloth.
10/10