Furn Mill NEVADA HOCTA00015 User manual

ASSEMBLY INSTRUCTION
PRODUCT CODE: HOCTA00015
ASSEMBLY RATING
TheAssembly Rating is a 5-point
system that shows the degree of effort
needed in assembling aspecific
product (with 1being easy and 5being
difficult).
For most products, two
persons are recommended.
EASYDIFFICULT
Requirement for Assembly
1/1
2 PERSONS RECOMMENDED
NEVADA COFFEE TABLE

HARDWARE QTY.
HARDWARE DETAIL ASSEMBLED PRODUCT
1/2
Allen Bolt (flat pen head)
M8x70 mm
Allen Key no.5 1 nos
8 nos

1/3
STEP 01
STEP02
STEP03
Flip the PART-A(Top).
Fix the PART-B (leg) with Allen Bolt using Allen
Key at position A1,A2,A3 & A4 as shown in Fig.
Flip the Table.
Your Table is Ready.

Thank you for your purchase!
We hope you will enjoy your new product for many years to come. Our commitment to providing
quality products does not simply end when a purchase is made. We stand behind our products and
will provide any support needed in order for you to fully enjoy your purchase. Your satisfaction is the
greatest recognition we could have.
Because we value your trust in our company, we will do our best to meet your service expectations.
Should you have any assembly related questions, parts replacement requests, comments or
suggestions, please feel free to contact us any time. To help expedite the service, please have the
assembly instructions available, along with your order receipt.
Note :
Do not dispose of any packaging or contents of the shipping carton until assembly is
completed to avoid accidentally discarding small parts or hardware.
CARE INSTRUCTIONS
Clean
Dust off with a soft dry cloth only.
For cleaning, use a mild cleansing agent. Do not use agents with sanding properties or
which contain ammonia or bleach.
Stains
Take care of spills immediately. Absorb the spill with a clean white cloth or paper towel.
Gently dab the surface and lift the stains.
Avoid
Keep the furniture away from direct sunlight and away from heat sources; excessive
exposure to sunlight may fade the colour of the upholstery.
To protect furniture from moisture, avoid placing the furniture in direct contact with damp
walls. In case of contact, wipe the furniture promptly with a dry, soft and lint-free cloth.
Always lift and place furniture pieces while repositioning. Dragging the furniture over a pro-
a longer period of time can weaken the joints.
Always use a coaster and mats while placing hot, cold or wet materials on the furniture to
avoid surface damage.
Avoid using furniture polish, chemical solvents and cleaners for our range of children’s
furniture.
1/4