Furrion Aurora Series User manual

*Product picture is for reference only.
Furrion Aurora™ TV Series
Instruction Manual
Model: FDUP43CBR / FDUP49CBR / FDUF55CBR / FDUP65CBR
FDUF43CBR / FDUF49CBR / FDUP55CBR / FDUF65CBR

2
Welcome
Thank you and congratulations for purchasing this Furrion Aurora™ TV. Before placing your new
appliance into operation, please read these operating instructions carefully. This instruction
manual contains important information for safe use, installation and maintenance of the
appliance.
The manufacturer does not accept responsibility for any damages that may arise due to
non-observation of these instructions.
If you have any further questions regarding our products, please contact us at
[email protected]
Supplier’s Declaration of Conformity
47 CFR § 2.1077 Compliance Information
Unique Identifier
Trade Name: Furrion
Model No.: FDUP43CBR, FDUP49CBR, FDUF55CBR, FDUP65CBR,
FDUF43CBR, FDUF49CBR, FDUP55CBR, FDUF65CBR
Responsible Party – U.S. Contact Information
Furrion Innovation Center & Institute of Technology
52567 Independence Ct., Elkhart, IN 46514, USA
Toll free:1-888-354-5792; Email: [email protected]
FCC Compliance Statement
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful

including interference that may cause undesired operation.

3
Contents
Welcome.................................................................................................2
Contents .................................................................................................3
Safety Warnings ....................................................................................4
Function Overview ................................................................................8
Control Panel ......................................................................................................................................... 8
Rear Panel............................................................................................................................................... 9
Connection ........................................................................................................................................... 10
Remote Control................................................................................................................................... 12
Before Operation................................................................................. 14
What’s in the Box................................................................................................................................ 14
Prepare your Remote Control ...................................................................................................... 14
Choose a Proper Location for your TV .....................................................................................15
Cable Management ...........................................................................................................................15
Mount on Wall.......................................................................................................................................17
Getting Started.................................................................................... 18
TV Settings........................................................................................... 19
Setup Settings..................................................................................................................................... 19
Picture Settings ..................................................................................................................................22
Audio Settings .....................................................................................................................................23
Time Settings.......................................................................................................................................25
Lock Settings...................................................................................................................................... 26
Channel Settings............................................................................................................................... 29
PC Settings.......................................................................................................................................... 30
USB Operation..................................................................................... 31
Troubleshooting ..................................................................................32
Specifications .................................................................................... 33
Care and Clean ................................................................................... 34

4
Safety Warnings
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT REMOVE

SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE
PERSONNEL.
WARNING: TO REDUCE THE RISK OF
FIRE OR ELECTRIC SHOCK, DO NOT
EXPOSE THIS APPARATUS TO RAIN OR
MOISTURE.
This ‘bolt of lightning’ indicates
uninsulated material within your
unit which may cause an electric
shock. For the safety of everyone in your
household, please do not remove product
covering.
The ‘exclamation mark’ calls
attention to features within the
enclosed literature to prevent
operating and maintenance problems.
Important Safety Instructions
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Clean only with dry cloth.
6. Do not block any ventilation openings. Install
in accordance with the manufacturer’s
instructions.
7. Do not install near any heat sources such
as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce
heat.
8. Do not mount this TV near a motor or
transformer where strong magnetism is
generated. Images on the television will
become distorted and the colour irregular.
9. Do not defeat the safety purpose of the
polarized or grounding-type plug. A polarized
plug has two blades with one wider than the
other. A grounding type plug has two blades
and a third grounding prong. The wide blade
or the third prong are provided for your safety.
When the provided plug does not fit into your
outlet, consult an electrician for replacement of
the obsolete outlet.
10. Protect the power cord from being walked on
or pinched, particularly at plugs, convenience
receptacles, and the point where they exit from
the apparatus.
11. Only use attachments/accessories specified by
the manufacturer.
12. Do not place the product on an unstable cart,
stand, tripod, table, or anywhere the unit is not
permanently installed. Placing the product on
an unstable place can cause the product to fall,
resulting in potential serious personal injuries,
as well as damage to the product.
13. Use only with a cart, stand, tripod, bracket or
table specified by the manufacturer
or sold with the apparatus. When a
cart is used, use caution when
moving the cart/apparatus to avoid
injury from tip-over.
14. Unplug this apparatus during lightning storms
or when unused for long periods of time.
15. Do not touch this apparatus or antenna during
a thunder or lightning storm.
16. Refer all servicing to qualified service
personnel. Servicing is required when the
apparatus has been damaged in any way, such
as if the power-supply cord or plug is damaged,
liquid has been spilled or objects have fallen
into the apparatus, or when the apparatus has
been exposed to rain or moisture, does not
operate normally, or has been dropped.
17. Naked flame sources such as lit candles, should
not be placed on apparatus.
18. Do not overload wall outlets, extension cords,
or integral convenience receptacles as this can
result in a risk of fire or electric shock.
19. The power cord must be routed properly to
prevent people from stepping on it, or objects
from resting on it. Check the cords at the plugs
and product.
20. Never push objects of any kind into this product
through openings as they may touch short-out
parts or dangerous voltage points that could
result in a fire or electric shock.
21. If an outside antenna is connected to the
television equipment, be sure the antenna
system is grounded so as to provide some

5
Safety Warnings
protection against voltage surges and built
up static charges. Section 810 of the National
Electrical Code provides information with
respect to proper grounding of the mast and
supporting structure, grounding of the lead-in
wire to an antenna discharge unit, size of
grounding conductors, location of antenna
discharge unit, connection to grounding
electrodes, and requirements for the grounding
electrodes.
22. An outside antenna system should not be
located in the vicinity of overhead power
lines or other electrical light or power circuits,
or where it can fall into such power lines or
circuits. When installing an outside antenna
system, extreme care should be taken to keep
from touching such power lines or circuits as
contact with them might be fatal.
NEC-NATIONAL
ELECTRICAL
CODE S2898A
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H))
GROUND CLAMPS
GROUND CLAMP ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
EXAMPLE OF ANTENNA GROUNDING AS PER
THE NATIONAL ELECTRICAL CODE
ANTENNA
LEAD IN WIRE
GROUNDING
CONDUCTORS (NEC
SECTION 810-21)
ELECTRIC SERVICE
EQUIPMENT
23. NOTE TO CABLE/TV INSTALLER: This
reminder is provided to call the CATV system
installer’s attention to Article 820-40 of the
National Electric Code (U.S.A.). The code
provides guidelines for proper grounding and, in
particular, specifies that the cable ground shall
be connected to the grounding system of the
building, as close to the point of the cable entry
as practical.
24. When replacement parts are required, be sure
the service technician uses replacement parts
specified by the manufacturer or those that
have the same characteristics as the original
part. Unauthorized substitutions may result in
fire, electric shock or other hazards.
25. Upon completion of any service or repairs to
this unit, ask the service technician to perform
safety checks to determine that the unit is in
proper operating condition.
26. When you connect the product to other
equipment, turn off the power and unplug from
the wall outlet. Failure to do so may cause an
electric shock and serious personal injury. Read
the owner’s manual of the other equipment
carefully and follow the instructions when
making any connections.
27. The socket-outlet must be installed near the
unit and easily accessible.
28. Where the mains plug is used as the disconnect
device, the disconnect device shall remain
readily operable.
29. Never remove the back cover of the TV as this
can expose you to very high voltages and other
hazards. If the TV does not operate properly,
unplug the TV and call your authorized
dealer or service center. Adjust only those
controls that are covered in the instructions,
as improper changes or modifications not
expressly approved by Furrion could void the
user’s warranty.
30. Do not submerge this TV in water or pressure
wash it. It is not designed to be submerged in
water, withstand pressure washers, high-
pressure water jets, or hurricane-type weather.
31. Cleaning : With your TV turned off, gently wipe
the surface of the display panel with a damp
(with water) microfiber, cotton or flannel cloth.
(Do not use tissues, rags, sponges or paper
towels because they may damage the screen
and leave lint pieces behind). Remove any dirt
and salt deposits from the unit, being careful to
rinse the cloth frequently to avoid scratching
the TV or screen surface. Avoid using harsh
chemicals, abrasives, or solvents when
cleaning any surface on the unit.
32. The operation temperature for the unit is
-20°C (-4°F) to +50°C (+122°F) . The storage
temperature is -33°C (-27.4°F) to +58°C
(+136.4°F). Protect the TV from damage by the
extreme temperature. This is not a commercial
TV.
33. Batteries (battery pack or batteries installed)
shall not be exposed to excessive heat such as
sunshine, fire or the like.
34. The apparatus should be connected to a
mains socket outlet with a protective earthing
connection.
35. To prevent injury, this apparatus must be
securely attached to the wall in accordance
with the installation instructions.

6
Safety Warnings
HOW TO HANDLE THE LED PANEL
●Do not press hard or jolt the LED panel. It may
cause the LED panel glass to break and injury
may occur.
●If the LED panel is broken, make absolutely sure
that you do not touch the liquid in the panel.
This may cause skin inflammation.
●If the liquid gets in your mouth, immediately
rinse and consult with your doctor. Also, if the
liquid gets in your eyes or touches your skin,
consult your doctor after rinsing for at least 15
minutes in clean water.
Possible Adverse Effects on LED Panel: If
a fixed image displays on the TV screen for a
long period of time, it may cause a permanent
disfigurement on the screen with image burn-in or
ghosting. This type of damage is NOT COVERED
BY THE WARRANTY.
●Avoid displaying a static picture or a picture
with static elements (black bars, black borders,
logos, etc.) on the TV screen for more than
two hours at a time. Make sure you change the
image on your screen periodically.
●If the aspect ratio of the TV is set to 4:3 for a
long period of time, image burn may occur on
the letterboxed area of the screen. Make sure
you change the size of the picture occasionally.
The following symptoms are not signs of
malfunction but technical limitation. Therefore
we disclaim any responsibility for these
symptoms.
●LED panels are manufactured using an
extremely high level of precision technology,
however sometimes parts of the screen may
be missing picture elements or have luminous
spots. This is not a sign of a malfunction.
●Do not install the LED panel near electronic
equipment that produces electromagnetic
waves. Some equipment placed too close to
LED may cause interference.
●Effect on infrared devices – There may be
interference while using infrared devices such
as infrared cordless headphones.
COMPLIANCE
FCC Statement
Note: This equipment has been tested and found
to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable
protection against harmful interference in a
residential installation. This equipment generates,
uses and can radiate radio frequency energy and,
if not installed and used in accordance with the
instructions, may cause harmful interference to
radio communications.
However, there is no guarantee that interference
will not occur in a particular installation. If this
equipment does cause harmful interference
to radio or television reception, which can be
determined by turning the equipment off and
on, the user is encouraged to try to correct the
interference by one or more of the following
measures:
●Reorient or relocate the receiving antenna.
●Increase the separation between the equipment
and receiver.
●Connect the equipment into an outlet on a
circuit different from that to which the receiver is
connected.
●Consult the dealer or an experienced radio/TV
technician for help.
WARNING: Changes or modifications to this unit
not expressly approved by the party responsible
for compliance could void the user’s authority to
operate this equipment under FCC Rules.
This device complies with part 15 of the FCC
Rules. Operation is subject to the following two
conditions:
1. This device may not cause harmful
interference.
2. This device must accept any interference
received, including interference that may
cause undesired operation.
POWER SOURCE
This TV is designed to operate on 100~240 volt
50/60 Hz, AC current. Connect the power cord
to a GFCI protected AC outlet with an “in-use”
waterproof cover.
Warning: TV and GFCI receptacle must be
installed away from any water source in a safety
distance. Be sure to check local electrical codes
and comply with their local standards.
To reduce the risk of fire or electric shock, do not
expose this apparatus to rain or moisture.

7
Safety Warnings
CARE OF THE ENVIRONMENT
Disposal of your old product and battery
Your product is designed and manufactured
with high quality materials and components,
which can be recycled and reused.
●Never dispose of your product with other
household waste. Please familiarize yourself
with the local rules on the separate collection of
electrical and electronic products and batteries.
●The correct disposal of these products helps
prevent potentially negative consequences on
the environment and human health.
●Your product contains batteries which cannot
be disposed of with normal household waste.
The battery must be recycled or disposed of

forinformation on battery recycling or disposal.
All registered and unregistered trademarks are
property of their respective owners.
CAUTION: Changes or modifications not expressly
approved by the party responsible for compliance
could void the user’s authority to operate the
equipment.
SAFETY PRECAUTIONS
WARNING: Never place a television set in an
unstable location. A television set may fall, causing
serious personal injury or death. Many injuries,
particularly to children, can be avoided by taking
simple precautions such as:
–Using cabinets or stands recommended by the
manufacturer of the television set.
–Only using furniture that can safely support the
television set.
–Ensuring the television set is not overhanging
the edge of the supporting furniture.
–Not placing the television set on tall furniture
(for example, cupboards or bookcases) without
anchoring both the furniture and the television
set to a suitable support.
–Not placing the television set on cloth or other
materials that may be located between the
television set and supporting furniture.
–Educating children about the dangers of
climbing on furniture to reach the television set
or its controls.
If your existing television set is being retained
and relocated, the same considerations as above
should be applied.
NOTES WHEN MOUNTING THE TV ON THE
WALL
IMPORTANT: The TV must be installed away from
any water source in a safe distance.
If the unit is to be mounted on the wall, contact the
retailer where you purchased the TV for advice,
and have the equipment professionally installed.
Incomplete or improper installation may cause
injury to you, and/or damage to the TV. Please refer
to the VESA mounting pattern to ensure the correct
VESA mounting is used for the TV.
VESA MOUNTING PATTERN
Model Width
mm
Height
mm
Screw
Size Quantity
FDUP43CBR 200 
M6 * 15mm 4
FDUF43CBR 200 
FDUP49CBR 200 
FDUF49CBR 200 
FDUP55CBR 400 400
FDUF55CBR 400 
FDUP65CBR 400 
FDUF65CBR 400 
CAUTION: To prevent personal injury and/or
damage to the TV or personal property, use at least
two people to install or move the TV.

8
Function Overview
Control Panel
POWER
VOL- VOL+ CH- CH+ MENU SOURCE
1
4
2
5
3
6
7
* Please note that the button layout of the
controls may vary from model to model.
Item Button Function
1SOURCE Select the input source
2MENU Enter the main menu
3CH+ Skip to the next channel
4CH- Skip to the previous
channel
5VOL+ Increase volume
6VOL- Decrease volume
7POWER Switch the TV on/off

9
Function Overview
Rear Panel
HDMI 3
MHL/CEC
IN
RF IN
PC AUDIO
IN
HDMI 2
CEC
IN
HDMI 1
ARC/CEC
IN
VGA
IN
Pr
Pb
Y
VIDEO IN
AUDIO IN
L
R
R
L
COAX
OUT
IR
Ext
AUDIO OUT
USB(2.0) IN
DC 5V
Max. 500mA
1
2
3
7
6
8
11
10
9
12
4
5
No. I/O port Description
1RF IN Connect to the ANTENNA, CABLE or
CABLE BOX.
2PC AUDIO
IN Connect to the AUDIO OUT port of a PC.
3VGA IN Connect to the VGA OUT port of a PC to
use the TV as a monitor.
4Y/Pb/Pr
Connect to the COMPONENT VIDEO
OUT ports of a DVD Player, Cable Box or
other compatible devices.
5
VIDEO IN Connect to the COMPOSITE VIDEO/
AUDIO OUT ports of a DVD Player, Cable
Box or other compatible devices.
AUDIO IN

6COAX OUT Connect to the COAXIAL AUDIO IN port
of an audio device.
7IR Ext
Connect with an IR extender.
Note: Please purchase an IR extender with
the spec as below:
3.5 mini plug/Tip-VCC 5V/Center-Data/
Lower-Ground; With 30ft range from
remote control to IR receiver; Operating
voltage 3.3~5v and supported by 38Khz
bandwidth.
8AUDIO OUT

Connect to the AUDIO IN ports of an
audio device.
9HDMI 3 IN
(MHL/CEC)
Connect to the HDMI OUT port of a DVD
Player, Games Console, Cable Box or
other HDMI device.
MHL (Mobile High-Definition Link)
You can connect an MHL-enabled device,
such as certain models of smart phones
& tablets, and view the device’s screen
on the TV. Connecting an MHL-enabled
device to the HDMI3 input requires a
special MHL cable (not included).
CEC (Consumer Electronics Control)
When connected to the CEC compatible
Furrion Entertainment Systems or other
CEC Compatible devices, the TV links
with the system to give extra functionality.
ARC (Audio Return Channel)
When connected with a HDMI 1.4 cable to
an ARC compatible audio system, the TV
links with the device to give extra audio
functionality.
10 HDMI 2 IN
(CEC)
11 HDMI 1 IN
(ARC/CEC)
12 USB IN USB Port: view pictures/movies/text and
listen to MP3s via a compatible USB stick.
* The configuration of the connection
ports may vary from model to model.

10
Function Overview
Connection
Your Furrion Aurora™ TV offers multiple connection options. Please consult the manual of DVD
player, Games Console or other devices to ensure proper connection and use.
You can choose one or more of the connections below to operate.
Note: All external devices and cables shown in the diagram are for reference only and not
included in the package.
A
HDMI 1,
HDMI 2, or
HDMI 3
OR
B
L (White)
R (Red)
VIDEO (Yellow)
AUDIO
C

11
Function Overview
Connection
R (Red)
Y (Green)
Pb (Blue)
Pr (Red)
AUDIO
VIDEO
L (White)
D
R (Red)
L (White)
OR
Furrion model No.:
FSBNN3MR-BL/
FSBNN3MSR-BL
(sold separately)
IR extender
E
F
GH

12
Function Overview
Remote Control
1
3
5
6
8
9
10
11
13
15
17 20
24
26
28
29
30
31
33
35
22
2
4
7
12
14
16
18 19
21
23
25
32
34
27

13
Function Overview
No. Button Function
21 ZOOM Enlarge screen images
22 MTS Select Stereo, Mono, or Second
Audio Programming
23 Skip to the beginning of the next
chapter/track/photo.
24 S.MODE Select sound mode
25 Fast forward
26 P.MODE Select picture mode
27 Toggle between the current and
previous channels
28 CH / Channel Up/Down
29 VOL +/- Increase/Decrease the volume
30 EXIT Exit the current menu
31 SOURCE Select the input source
32 GUIDE
Open the current digital channel
information guide (antenna
only).
33 FAV Add the channel to favorite list
34 CH.LIST Display the channel list
35 Mute or unmute the audio
No. Button Function
1Turn the TV on/off
2SLEEP Set time for the TV to turn off
3INFO Display information about the
current input source
4FREEZE Freeze current picture
5MENU Enter the main menu
6/ / / Navigate in a menu
7OK Confirm the selection
8RETURN Return to the previous menu
9NUMBER
BUTTONS
Enter numbers or select
channels
10 
Insert the dash for selecting
digital channels directly (For
example, channel 28-2 would
be selected by the button
sequence 2 8 - 2.)
11 Fast backward
12 Start or pause the playback
13 Skip to the beginning of the
previous chapter/track/photo.
14 Stop playback
15 V-CHIP Set up parental control
16 CC Select Closed Caption: ON/
OFF/CC On Mute
17 USB Switch the source to USB
18 TV Switch the source to TV
19 HDMI Switch the source to HDMI
20 VGA Switch the source to VGA
Remote Control

14
Before Operation
What’s in the Box
Thanks for purchasing this Furrion Aurora™ TV. This manual will help you set up and begin using
your TV. First, check the contents of your box with the parts checklist below:
●TV
●Weather proof remote with button battery (x1) and tool to open battery cover (x1)
●Wall mount screws (x4)
●Screw adaptors (x4)
●RCA cable
●Printing materials
Now you can get started!
Prepare your Remote Control
BATTERY INSTALLATION
1. Open the battery cover with the tool supplied with the remote control.
2. Install the supplied button battery CR2025.
3. Close the battery cover.
OPEN
CLOSE
OPEN
CLOSE
OPEN
CLOSE
BATTERY PRECAUTIONS
These precautions should be followed when using battery in this device:
●Use only the size and type of battery specified.
●Danger of explosion if batteries are incorrectly replaced.
●If the device is not to be used for a long period of time, remove the battery to prevent
damage or injury from possible battery leakage.
●The batteries should not be exposed to excessive heat due to sunlight, fire or other heat
sources.
WARNING: This product contains a button battery on the remote control.

15
Before Operation
●Do not ingest the battery contained within
the remote control supplied with the unit
as this battery represents a chemical burn
hazard.
●If the button battery is swallowed, it can
cause severe internal burns in just 2
hours and can lead to death. If you think
batteries might have been swallowed or
placed inside any part of the body, seek
immediate medical attention.
●Keep new and used batteries away from
children. If the battery compartment does
not close securely, stop using the product
and keep it away from children.
Choose a Proper Location
for your TV
Important: The TV must be installed away
from any water source in a safety distance.
For best viewing we recommend you install it
in a shaded environment.
●Avoid to install the TV where the screen is
facing direct sunlight. The ideal location
is in one place where the TV is shaded
by structures, or under a patio cover or
gazebo.
●If the sun shines directly on the screen
for long periods of time, dark areas may
appear on the screen. This is a normal
reaction for the LED panel, and will not
cause damage to the screen. Either turn
the screen away from the sun, or shade
the TV, and the dark areas will soon
disappear.
Note: DO NOT use the TV if ambient
air temperature exceeds the operating
temperature limits.
Cable Management
WARNING: Do not connect the power source
before making connections.
1. Open the cable access door in the rear
panel by loosing the thumb screws.
(Figure 1)
2. Connect the cables and lead all
connecting cables downwards through
the duct at the bottom of the cable access
door.
3. Leave a drip loop when cables enter the
compartment. This will prevent water
from dripping down the cord and possibly
entering the door area.
4. Close the door and tighten the thumb
screws for the best waterproof effect.
(Figure 2)
Figure 1

16
Before Operation
Cables
Drip Loop
Thumb Screws x 3
Cable Access Door
Figure 2
Tip: If a TV streaming stick is connected and stays inside the rear cable compartment, the RF/
Wifi signal will be reduced when passing through the closed cable door.
Connect the Power Cord
Connect the power cord to a GFCI protected AC outlet with an “in-use” waterproof cover.
Caution:
●Do not connect power cord during cable connecting and TV installation.
GFCI
PROTECTED
OUTLET
GFCI
PROTECTED
OUTLET
WARNING: TV and GFCI receptacle must be installed away from any water source in a safety
distance. Be sure to check local electrical codes and comply with their local standards.

17
Before Operation
POWER SOURCE
NOTE: Please make sure to insert the cord securely at both the TV and the wall outlet.
WARNING:
●DO NOT USE WITH A VOLTAGE OTHER THAN THE POWER VOLTAGE SPECIFIED. DOING
SO MAY CAUSE FIRE, ELECTRIC SHOCK, OR DAMAGE.
●DO NOT PLUG/UNPLUG THE POWER ADAPTER WHEN YOUR HANDS ARE WET. DOING
SO MAY CAUSE ELECTRIC SHOCK.
CAUTION:
●

Mount on Wall
You are recommended to install the TV in an area shaded by trees, landscape and/or
structures, or under a patio cover or gazebo.
FULL SHADE (Covered gazebos, patios, porches)
TV designed for fully shade outdoor spaces.
(Model: FDUF43CBR / FDUF49CBR / FDUF55CBR / FDUF65CBR)
PARTIAL SUN (Pergolas, partially covered decks)
TV designed for partial sun exposure and brighter outdoor spaces.
(Model: FDUP43CBR / FDUP49CBR / FDUP55CBR / FDUP65CBR)

18
Before Operation
IMPORTANT:Connect all cables to the rear panel prior to mounting TV on wall. The cable
access door in rear panel will be obstructed once the TV is mounted.
●Follow the installation guide supplied with the Wall-Mount Bracket (purchased separately)
when installing the TV.
●Choose an appropriate location and refer to VESA pattern for mounting.
●Recommend you to contact a professional for installation and use at least two people to
move or install the TV.
Wall
Adaptor
M6 Screws

19
Getting Started
The Setup Wizard window appears only the
first time you turn on the TV. It will assist you
to configure the TV and scan for available
channels.
IMPORTANT: Make sure the antenna or
cable connection is made.
1. Press POWER button on the TV control
panel or button on the remote control
to switch on the TV. The Setup Wizard
window appears on the screen.
NOTE: It may take a few seconds before
the Setup Wizard window appears on the
screen.
2. Use / / / to navigate and select
your desired settings.
Setup Wizard
Air/Cable Air
Cable System Auto
Auto Scan
Menu Language English
Move Select Exit
MENU
Setup Wizard
Menu
Language
Use or to highlight Menu
Language, then press or to select
English, French or Spanish.
Air/Cable
Use or to highlight Air/Cable,
then press or to select Air or
Cable.
Cable
System
Use or to highlight Cable
System, then press or to select
Auto, STD, IRC or HRC.
NOTE: Only adjustable when “Air/
Cable” is set as “Cable” mode.
Auto Scan
Use or to highlight Auto Scan,
then press OK or to start scanning all
the channels available in your area.
NOTE: You may press MENU at any time to
exit the menu.

20
TV Settings
Setup Settings
1. Press MENU button, the setup window will appear on the screen.
2. Use or to highlight Setup mode.
3. Use or to highlight the item you would like to reset, then press or to select the
settings.
4. Press MENU to return to the previous menu or press EXIT at any time to exit the setting.
Setup Menu
Menu
Language
Select the menu
language Press or to select English, Français, Español or Deutsch.
Transparency Control the menu
transparency Press or to select Off /On.
Zoom Mode Set the picture
proportion
Press or to select Zoom, Normal, Cinema or Wide.
* The selection for Zoom Mode may vary from model to model.
Noise
Reduction
Reduce the
roughness of the
picture
Press or to select Off, Weak, Middle or Strong.
Advanced Control the PC
settings. *Only available after a PC connected.
Source Label Allow labeling the
input source
TV
Press or to select Custom, Default, Antenna,
Cable, Satellite, DTV, DVD, Blu-ray, HD-DVD, XBOX,
Wii, PS3, Game, Computer, VCR or DV
* The selection for Source Label may vary from model
to model.
AV
YPBPR
HDMI1
HDMI2
HDMI3
PC
USB