fuse ONE S User manual

QUICK START GUIDE
WHAT’S INCLUDED:
1 CHARGE YOUR ONE S SPEAKER
.
Fully charge before using the first time using the
supplied cable. The LED indicator will turn red when
the speaker is charging and will switch OFF when
the speaker is fully charged.
ONE S
PORTABLE SPEAKER
AFS-BT-1S-GRY USB-C Charging Port
LED indicator
WARNINGS
• Only use the charging cable provided and a good
quality USB power source.
• Charge the product in a well-ventilated area and avoid
charging under pillows, blankets, or on flammable
surfaces. Do not leave unattended while charging.
• Although this speaker is IPX6 water-resistant, it is not
waterproof. To avoid damaging the speaker, please
keep it away from direct streams of water and do not
submerge it in water.
• Do not expose this product to sources of heat. Do not
expose to temperatures above 40°C, such as in a car on
a hot day, or in direct sunlight.
•Prevent objects and debris from entering the device
ports.
•To protect your hearing, keep the volume at a safe level
and take regular breaks.
•Refer all servicing to qualified service personnel, which
is required if this product is damaged in any way, is
exposed to liquid, or does not operate normally.
•Children must be supervised when using or handling
this product.
SPECIFICATIONS
Bluetooth version: V5.2
Waterproof rating: IPX6
Driver: 5W
Built-in Battery: 3.7V/1200mAh lithium polymer
Input USB-C: DC 5V 1A Max
Play time: Approx 5hr
Charge time: Approx 2.5hr
Front

2 CONNECT YOUR ONE S SPEAKER 3 USE YOUR ONE S SPEAKER
When the speaker is fully charged, press the power
ON button for 2 seconds, the speaker will emit a short
sound and the LED indicator light will flash blue
to indicate it is ON and ready to pair.
Turn Bluetooth ON in your phone settings and select
Fuse One S from the available Bluetooth devices.
The speaker will emit a sound and the LED indicator
light will remain blue to indicate it has successfully paired.
Bluetooth
Bluetooth
Fuse One S
OTHER DEVICES
Fuse Airbudz II
MY DEVICES
i
..4 PRODUCT SUPPORT
For the most up-to-date assistance, please scan this
QR Code for product support.
.
for 2 seconds
PressPrevious track
Volume down Press
Switch speaker ON/OFF Press for 2 seconds
PressPlay/pause song
PressVolume up
PressNext track for 2 seconds
CHECK OUT OUR WHOLE RANGE AT
FUSEAUDIO.COM.AU
CHECK OUT OUR WHOLE RANGE AT
FUSEAUDIO.COM.AU
Removable strap
LED indicator
Back