FX LAB Vasto G017A User manual
Vasto DJ Lighting Effect
G017A
User Manual
User Manual Ver.2 June 2012 (473)
Page 2
INTR DUCTI N
Thank you for purchas ng the Vasto DJ L ght ng Effect. Th s model s a d sco
l ght wh ch uses l ght beams to produce beaut ful des gns, and s su table for
small and med um-s zed enterta nment venues.
TECHNICAL DATA
Name: Vasto
Type: SRL-473
Lamp: 64610 12/50 W
Voltage: AC 230 V~ 50 Hz
Color: RED, YELLOW, BLUE, GREEN, ORANGE
We ght: 2 kg
Measurement: L250xW141xH120 mm
FEATURES
•The Class c Tw ster L ght Effect w th 3 sett ngs:
oConstant Rotation: Gentle-paced clockw se movement for
mood sett ng
oStatic: Illum nate an event or a po nt of nterest
oSound2Light: Clockw se and ant -clockw se movement n
t me to the beat of the mus c
•Access ble Lamp Holder for ease of replacement
•Sharp/Intense Colour Beams
•One s ngle Vasto can l ght up an average-s zed Lounge or other room
for house part es and small venues – deal for ch ldren’s part es
•The length of throw from the l ght and sharpness of the pattern
travels over a long room – deal as supplementary l ght ng effect for
mob le DJs
User Manual Ver.2 June 2012 (473)
Page 3
PERATING INSTRUCTI NS
1. Unpack the carton to check f there s any damaged or m ss ng parts
when you rece ve the un t, contact your suppl er n the f rst nstance f
there are any ssues w th the product.
2. Open the l d to nstall the lamp. Do not touch the lamp w th your hand;
we suggest you use a cloth to hold the lamp. D sconnect the un t from
the power wh le chang ng the lamp.
3. Use a clamp to hang the un t onto the truss and fasten t ght. Attach the
un t carefully onto the truss by w nd ng a cha n through the bracket of
the un t.
4. Place the un t where there s adequate vent lat on, away from any
flammable and explos ve objects.
5. Check that the rated power corresponds to the ma ns supply.
BULB INSTALLATI N/REPLACEMENT
1. Before open ng un t, make sure that the un t s cool and s not
connected to any power source.
2. Remove the thumbscrew located at the top/front of the un t.
3. L ft the bulb access door open.
4. Install/replace halogen bulb. Make sure the bulb s n securely; do not
touch the glass on the bulb w th your bare hands, f you touch the
glass, clean t w th alcohol us ng a cotton ball or soft cloth.
5. Close the access doors and t ghten the screws.
CAUTI N
•Never open th s un t when t s hot and/or s connected to a power
source.
•For opt mal un t performance and longer unit life, you must cycle the
use of the un t by g v ng the un t a 5 m nute break to cool down after
15 m nutes of cont nuous use.
•Never use th s un t n a wet and/or dusty room.
•Replace bulbs and fuse w th those of proper spec f cat ons.
User Manual Ver.2 June 2012 (473)
Page 4
Electrovision Ltd, Lancots Lane, Sutton ak, St Helens, WA9 3EX
Tel: 01744 745 000 | Tel: 01744 745 001 | Web: www.electrovision.co.uk
Table of contents
