Gale Banks Banks iQ User manual

Gale Banks Engineering
546 Duggan Ave.,
Azusa, CA 91702
PH [phone]
Fax [phone]
bankspower.com
Product Information & Sales:
[phone]
Customer Support:
[phone]
Installation Support:
[phone]
Start Up
Press ‘ON/OFF’ button on top left side to turn ‘ON’.
Turn your vehicle on to ‘WAKE UP’Banks iQ from
‘SLEEP’ mode.
Note: If Banks iQ does not ‘WAKE UP’from ‘SLEEP’
mode, make sure the USB interface connection is
connected and the sliding switch on the left side is slid
up to the ‘ON’ position.
Changing Power Levels
From the Power Mode, press the ‘UP’por ‘DOWN’q
arrows on the right of the guage screen to increase or
decrease the current power level.
* “CHANGING POWER SETTINGS”- refer to owner’s
manual for further details”
Changing Brake Settings
From the Safety Mode, use the ‘UP’por ‘DOWN’q
arrows in the ‘MANUAL’ mode to adjust braking force.
Use the ‘UP’por ‘DOWN’qarrows in the ‘AUTO’
mode to raise or lower downhill target cruising speed.
* “CHANGING BRAKE SETTINGS”- refer to owner’s manual
for further details”
©2012 Gale Banks Engineering P.N. 96804 v.5.0
Contact Us!
ON-SCREEN ALERTS On-screen
alerts can be set to notify you when
engine conditions reach your pre-set
limits. EGT, engine temp and trans
temp are monitored continously.
SYSTEM
STATUS
ENGINE TEMP OIL TEMP CHECK ENGINE EGT
TRANS TEMP SPEED BRAKE SEARCH FOOT BRAKE
NAVIGATION ICONS
iQ ICON RETURN TO
‘MODE’ SCREEN.
RETURN ICON RETURN TO THE
PREVIOUS SCREEN.
iQ HOME RETURN TO
“MODE SELECT’SCREEN.
WRENCH ICON GO TO THE
‘ADJUSTMENTS’ MENU.
Performance, Productivity,
and Entertainment Mode
For detailed information about using these Modes, please
refer to your Banks iQ Owner’s Manual.
96804-BanksiQ-quickref-v5.indd 1 5/18/12 3:11 PM

the engine running, touch the button labeled
‘CHECK FOR CODES’.
4. Press the ‘BANKS ‘ icon to return to
the ‘Mode’ screen and to save changes
or the ‘RETURN’ icon to return to the
‘ADJUSTMENTS’ menu.
Clearing
Follow this procedure after it is determined that any/
all diagnosed vehicle problems have been corrected.
1. In the ‘MODE SELECT’screen, press on the
‘DIAGNOSTICS’ button.
2. Press on the ‘VEHICLE DIAGNOSTICS’button to
check for trouble codes.
3. With the ignition in the ON/RUN position or with
the engine running, touch the button labeled
‘CHECK FOR CODES’.
4. Touch ‘CLEAR CODES’to erase them from the
vehicle ECU.
On Screen Alerts
1. Press the ‘WRENCH’ icon to move to the
‘ADJUSTMENTS’ menu.
2. Touch the ‘ON SCREEN ALERTS’button.
3. Touch the desired parameter that will be adjusted.
4. Touch the ‘PLUS’ (+) or ‘MINUS’ (-) buttons to
the sides of the parameter description to set the
temperature set point.
5. Touch the ‘PLUS’ (+) or ‘MINUS’ (-) buttons on the
lower part of the screen to set the alarm volume.
6. Repeat steps 3 and 4 to change all desired
parameters.
7. Save changes by pressing the ‘BANKS ‘ icon
and returning to the ‘MODE’ screen.
Press the ‘RETURN’ icon at any time to go
back to the previous screen. .
Mode Screen Hot Keys
1. Press the ‘BANKS ‘ icon any time you see it to
return to the ‘MODE’ screen.
2. Press the ‘RETURN’ icon any time you see it
to go back one screen at a time.
3. Press on the ‘BANKS IQ HOME’icon
any time you see it to return to the ‘MODE
SELECT’ screen
Adjustments Menu
From the Power, Safety or Performance Mode, press
on the ‘WRENCH’ icon on the lower left of the
screen to open the ‘ADJUSTMENTS’ menu. Select the
Banks iQ , SpeedBrake or Banks Diesel Tuner option
you want to change. Select an option to customize the
functionality of your Banks iQ, SpeedBrake or Tuner.
Sleep Mode
Banks iQ goes into ‘SLEEP’ mode whenever your
vehicle is turned OFF. Banks iQ also goes into ‘SLEEP’
mode if it is outside of your vehicle, not connected
to an external power supply, and has been inactive
for a preset period of time. To adjust this time period,
please refer to your Banks iQ Owner’s Manual.
Customize Display
1. From inside the Power, Safety or Performance
Mode, press the ‘WRENCH’ icon to open the
‘ADJUSTMENTS’ menu.
2. Choose ‘GAUGE PLACEMENT’, ‘GAUGE COLOR’
or ‘GAUGE STYLE’ to customize your display.
3. Save changes by pressing the ‘BANKS ‘ icon
and returning to the ‘MODE’ screen. Press the
‘RETURN’ icon at any time to go back to the
previous screen.
4. Change your gauges on-the-fly any time you are
in the Power, Safety or, Performance Mode. Just
press on the gauge you want to change and you
will jump to the ‘Gauge Configuration’ screen
Diagnostics Mode
Checking
1. From the ‘MODE SELECT’screen press on the
‘DIAGNOSTICS’ button.
2. Press on the ‘VEHICLE DIAGNOSTICS’button to
check for trouble codes.
3. With the ignition in the ON/RUN position or with
96804-BanksiQ-quickref-v5.indd 2 5/18/12 3:11 PM