Galeria Selection WEIN 51385 User manual

OPERATION MANUAL
RC ALARM CLOCK
EAN 4017805513853
1
RC ALARM CLOCK
Main Functions:
Six keys: SET, , SNZ/LIGHT,
RCC receive form: DCF
7 languages of week display
Time display: hour, minute, second
Calender of 2004-2054, 1 ½ digit to show month, 2 digits to show date
Temperature in °C/°F
Alert setting
Snooze function, 5 minutes alarm ring
LED backlight
Summertime setting
Double alarms
Controlling instruction manual
Standard mode
- Press into RCC receiving or exit RCC receiving,
- Press “SNZ/LIGHT” to light for 5 seconds
- When alarm, press SNZ/LIGHT to snooze function, alarm after 5 minutes
- Press to show ALARM time
- Press more than 2 seconds to ALARM setting mode.
- Press “SET” more than 2 seconds to TIME setting.
- Press to change °C/°F.

OPERATION MANUAL
RC ALARM CLOCK
EAN 4017805513853
2
Time mode setting:
- In standard mode press “SET” more than 2 seconds to time setting mode.
- Set order as follow: Year (2004-20054 month date language 12/24 HR Zone 
Hour Minute exit
- In DCF mode: when setting Time zone, TZ will display. The set item will twinkling by 1H.
- Press “SET” to confirm setting and turn to next setting.
- Press once to advance by one step; Set item will be advanced by 8 steps/sec, if press
more than 2 seconds.
- Press to back by one step; Set item will be backed by 8 steps/sec, If press more than 2
seconds.
Alarm setting mode:
- In ALARM setting mode, press to on and off the alarm.
- In ALARM setting mode, press more than 2 seconds to ALARM setting mode.
- Set order as follow: ALARM1 HOUR ALARM1 MINUTE ALARM2 HOUR ALARM2
MINUTE EXIT
- Press to confirm setting, and turn to next setting.
- Press once to advance by one step; Set item will be advanced by 8 steps/sec. if press
more than 2 seconds.
- Press to back by one step; Set item will be backed by 8 steps/sec, if press more than 2
seconds.
Without any handling in 30 seconds, exit the setting mode.
In buzzer state, press SNZ/LIGHT, it buzzer for 5 minutes, press any other button to exit the
buzzer.
In Snooze state, when another alarm coming, it will reenter into Alarm. Then ALARM or RCC
receiving, the temperature inspect will suspend.

OPERATION MANUAL
RC ALARM CLOCK
EAN 4017805513853
3
Operation:
RCC receiving:
RCC receiving controlling
- When start or re-set, automatically receive RCC,
- At each day 1: 00, 2: 00, 3: 00, 4: 00, 5: 00, 6: 00, 7: 00 automatically enter RCC receiving.
- Press to RCC receiving by force.
When receiving RCC signal, press to exit RCC receiving. Other function will be off in
moment.
When received the DST signal, the DST will display in the LCD. It means DST time is being
used.

OPERATION MANUAL
RC ALARM CLOCK
EAN 4017805513853
4
DISPOSAL INFORMATION 7 INFORMATION ON ENVIRONMENTAL PROTECTION
Battery information
1. Caution! There is a risk of explosion if the batteries are replaced in an improper way.
Only replace batteries by the same or an equivalent type of battery.
2. Always change the whole set of batteries. Do not mix old and new batteries, or batteries
with different state of charge.
3. Ensure that you use the batteries correctly. Respect the (+) plus/(-) minus polarity on the
battery and on the housing. Batteries which are used incorrectly may leak, or may cause
a fire or an explosion in extreme cases.
4. Never expose batteries to heat (for example blazing sun, fire) and never throw them into
a fire. The batteries may explode.
5. The connections should not be short-circuited.
6. Remove used batteries from the product immediately. Remove the batteries if you know
that the device will not be used for a long period. Otherwise the batteries may leak and
cause damage.
7. Keep all batteries out of the reach of children. Seek medical attention immediately
8. If batteries are swallowed.
9. Do not attempt to charge non-rechargeable batteries.
10. Rechargeable batteries must be removed from the device before charging.
11. If batteries leak, remove them from the battery compartment using a cloth and dispose of
them in accordance with regulations. Avoid skin and eye contact with the battery acid. If
your eyes come into contact with the battery acid, rinse them with lots of water and
contact a doctor immediately. If battery acid comes into contact with skin, wash the site
with lots of water and soap.
12. Remove the batteries from the product before disposing of the product.

OPERATION MANUAL
RC ALARM CLOCK
EAN 4017805513853
5
Labelling of waste electrical and electronic equipment according to directive 2012/19/EU Article
14 (2) e) in conjunction with Annex IX:
Environment Protection
Discarded electric appliances are recyclable and should not be discarded in the domestic waste!
Please actively support us in conserving resources and protecting the environment by returning
this appliance to the collection centres.
Labelling of the disposal of waste batteries according to directive 2006/66/EG Article 20 (1) e) in
conjunction with
Annex II
Used batteries must not be disposed of through household garbage, since they might contain
toxic elements and heavy metals that can be harmful to the environment and human health.
consumers are there for obligated to return batteries to retail or local collection facilities free of
charge. used batteries will be recycled.
they contain important raw materials such as iron, zinc, manganese or nickel.
the crossed-out wheelie bin symbol indicates. batteries and rechargeable batteries must not be
disposed of through household garbage.
the symbols below the wheelie bin indicate:
Pb: battery contains lead
Cd: battery contains cadmium
HG: battery contains mercury
Hereby, Weinberger GmbH & Co. KG, declares that the radio equipment type [EAN at the end
of the construction manual] is in compliance with Directive 2014/53/EU.is in compliance with
Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the following internet address:
Weinberger GmbH & Co.KG
Bergische Str.11
Industriegebiet Ost
42781 Haan
[e-mail]

OPERATION MANUAL
RC ALARM CLOCK
EAN 4017805513853
6
WARRANTY
The statutory warranty is valid for this product.
Damage which is caused by improper handling or operation, by incorrect set up or storage, by
improper connection or installation, as well as by force majeure or other external influences, is
not under guarantee. If product specific information is enclosed then we recommend that you
promptly read and comply with this.
Information:
If this product no longer functions correctly, then check whether this is due to a reason such as,
for example, an interrupted electrical supply (in so far as this concerns an electrical device) or
incorrect use in general.
Ensure that you attach, or have ready, the following documents or information for your product if
possible:
Sales receipt
Device name/type/brand
Description of the fault that has occurred with information on the fault which is as specific
as possible
Please contact your retailer for warranty claims or faults.
GWL 8/14 DE