GamerModz SPS-X3 User manual

GamerModz PS4 –SPS-X3 Ver 4.0 1
INSTRUCTION MANUAL
PS4 –SPS-X3 VER 4.0
Congratulations, welcome to the GamerModz Family! You are now a proud owner of a GamerModz Custom
Modded Controller.
The SPS-X3 - VER 4.0 FOR PS4 has been completely redesigned from the ground up to maximize your gameplay
experience. It includes a much faster processor allowing you turn mods on and off much quicker than previous
releases. Additionally, we have added many new mods as well as an on/off feature that allows you to use the
controller as standard controller without the possibility of accidently turning a mod on.
Your new GamerModz SPS-X3 Controller includes the following mods (Note you must be in the SPS-X3 Mode to
enable these mods. See Page 2):
•Rapid Fire (15 Pre-Set Modes).................................................................................................Page 2
•Adjustable Rapid Fire (5 Programmable Modes)....................................................................Page 4
•Left Trigger Rapid Fire .............................................................................................................Page 6
•Dual Trigger Rapid Fire (Akimbo) ............................................................................................Page 6
•Auto Burst (4 Modes)..............................................................................................................Page 7
•Remappable Pro Buttons (Optional Add On)..........................................................................Page 8
IMPORTANT: Verify that your GamerModz SPS-X3 Controller is Version 4 by following the instructions below.
The LED will flash 4 times indicating Version 4.
tap
tap
tap
Hold
, then

GamerModz PS4 –SPS-X3 Ver 4.0 2
Top level modes
All GamerModz Controllers have been redesigned to have a top level on/off feature. Your SPS-X3 controller is
designed with the following top level modes:
•Mode 1: SPS-X3 Mod
•Mode 2: Off (All Mods Disabled)
IMPORTANT: When you first power on yourcontroller, you will begin in Mode 2.
To change modes, hold down the Left Thumbstick and tap the Right on the D-Pad the number of times
corresponding to the mode you would like, then release the Left Thumbstick .The LED will flash the number
of times corresponding to the mode selected.
Rapid Fire modes
Your GamerModz Controller comes with 20 Rapid FireModes.Modes 1 thru 5 are custom programmable
modes that are user re-programmable for quick access. Modes 6 thru 20 are preset modes ranging from 6 shots
per second to 20 shots per second.
Turn On/off Rapid fire quickly
To enable/disable Rapid Fire, Hold Down the Right Trigger , Tap Down on D-Pad , then Release the
Right Trigger . Note: If you turn Rapid Fire on this way, the SPS-X3 Controller will default to the last Rapid
Fire Mode enabled.
tap
, then
Hold
Release
, then
, then
, then
Release
tap
Hold

GamerModz PS4 –SPS-X3 Ver 4.0 3
Selecting a Rapid fire modes
To enter a rapid fire mode, Hold Down the Right Trigger , and tap Up on the D-Pad the amount of
times corresponding to the mode you would like to enter, then Release the Right Trigger . The PS4
Controller LED will flash the numberof times corresponding to the mode you selected.
MODE 1 ---------------- X 1CUSTOM MODE 11 ----------------- X 11 11 SHOTS PER SECOND
MODE 2 ---------------- X 2CUSTOM MODE 12 ----------------- X 12 12 SHOTS PER SECOND
MODE 3 ---------------- X 3CUSTOM MODE 13 ----------------- X 13 13 SHOTS PER SECOND
MODE 4 ---------------- X 4CUSTOM MODE 14 ----------------- X 14 14 SHOTS PER SECOND
MODE 5 ---------------- X 5CUSTOM MODE 15 ----------------- X 15 15 SHOTS PER SECOND
MODE 6 ---------------- X 66SHOTS PER SECOND MODE 16 ----------------- X 16 16 SHOTS PER SECOND
MODE 7 ---------------- X 77SHOTS PER SECOND MODE 17 ----------------- X 17 17 SHOTS PER SECOND
MODE 8 ---------------- X 88SHOTS PER SECOND MODE 18 ----------------- X 18 18 SHOTS PER SECOND
MODE 9 ---------------- X 99SHOTS PER SECOND MODE 19 ----------------- X 19 19 SHOTS PER SECOND
MODE 10 ------------- X 10 10 SHOTS PER SECOND MODE 20 ----------------- X 20 20 SHOTS PER SECOND
, then
X times
Mode #
Hold
tap
Release

GamerModz PS4 –SPS-X3 Ver 4.0 4
Adjustable rapid
Fire modes
Your GamerModz SPS-X3 Controller comes with 5 Programmable Modes -Modes 1 thru 5. To program a Mode,
you mustfirst select the mode (Reference “Toggle Between Rapid Fire Modes” on Page 2).
Once you are in the Mode you wish to Program (Only applies to Modes 1 thru 5) follow the instructions below
to Program that Mode. Your GamerModz SPS-X3 Controller will remember the Re-Programmable Mode settings
even after you turn your controller off.
Programming adjustable Rapid fire modes
Once you are in the Mode you wish to Program, Hold Down the Right Trigger , then Hold Up onD-Pad
until the LED begins to flash. Release both the Right Trigger and Up on D-Pad .
Once in Programming Mode you can adjust your shots per second by Tapping Up on D-Pad to Increase
Shots per Second and by Tapping Down on the D-Pad to Decrease Shots per Second. Note: Each time
you Tap the D-Pad, your Rate of Fire will Increase or Decrease 1 Shot per Second.
To test the Rapid Fire Rate, fire your weapon by pulling the Right Trigger . Adjust your Rapid Fire Rate by
Tapping Up orDown on the D-Pad untilthe desired smoothnessand rate of fire is achieved. Please
see graph on Page 4 for Reference.
Once you have the desired Rapid Fire Setting, Tap Right on D-Pad to lock in the rate of fire. The PS4 LED
will flash the number times corresponding to your rate of fire.For Example: 12 Shots per Second, The LED will
flash 12 times.
, then
= Lock Rate of Fire
= Decrease Rate of Fire
= Increase Rate of Fire
Until LED
Begins to Flash
, then
Hold
Release
Hold

GamerModz PS4 –SPS-X3 Ver 4.0 5
Optimizing
Adjustable rapid Fire
The below graph is a visual representation on how Adjustable Rapid Fire works for your GamerModz SPS-X3
Controller. This will help you manually adjust your RapidFire to the optimal rate of fire by understanding how
GamerModz Rapid Fire works.
Notes:
-It is possible for the RapidFire to be so fast that it does not register inthe game. If this occurs, try
slowing it down at times.
-Slowing automatic weapons down to reduce recoil and increase accuracy can be effective too.
GOAL
Weapon optimal rate
- Rapid Fire Rate +
Faster than Max Fire Rate
Weapon is Stuttering orNot Firing at All
MAX Weapon Fire Rate
Weapon is Firing too Slowly
Slower than MAX Fire Rate

GamerModz PS4 –SPS-X3 Ver 4.0 6
Left Trigger Rapid fire mod
Left Trigger Rapid Fire allows you to assign rapid fireto your left trigger only. Note: You must first have a Rapid
Fire Mode turned on (See Page 2) to enable Left Trigger Mod.
To enable/disable Left Trigger Rapid Fire, Hold Down the Left Trigger and Tap Down on the D-Pad .
Then Release Left trigger .The PS4 Controller LED will flash one time to indicate that theLeft Trigger
Rapid Fire Mode has been toggled on/off.
dual Trigger Rapid fire mod (akimbo)
Dual Trigger Rapid Fire (Akimbo) allows you to assign rapid fire to both the Left Trigger and Right Trigger, giving
you a greater advantage when dual wielding. Note: You must first have a rapid fire mode turned on (See Page
2).
To enable/disable Dual Trigger Rapid Fire (Akimbo), Hold Down the Left Trigger and Right Trigger and
Tap Down on the D-Pad . Then Release Both Triggers . The PS4 Controller LED will flash one
time to indicate that the Dual Trigger Rapid Fire Mode has been toggled on/off.
, then
Hold
Tap
, then
Release
, then
Hold
Tap
, then
Release

GamerModz PS4 –SPS-X3 Ver 4.0 7
Burst mode
Burst Mode allows you to set the number of shots fired with each trigger pull. Your GamerModz SPS-X3
Controller comes with 4 Settings for Burst Mode.
To enable Burst Mode - Rapid Fire must first be enabled (See Page 2 “Toggle Between Rapid Fire Modes”)–
Hold Down the Right Trigger and Tap Right on the D-Pad the number of times corresponding to the
Burst Mode below. Then Release the Right Trigger .The PS4 Controller LED will flash the number of times
corresponding to the mode selected, indicating that Burst Mode has been toggled on.
To disable Burst Mode Hold Down the Right Trigger and Tap Right on the D-Pad 6 or more times,
then Release the Right Trigger .The PS4 Controller LED will flash one time to indicate that Burst Mode has
been toggled off.
MODE 2 -----------------X
2
2
ROUND BURST
MODE 3 -----------------X 3
3
ROUND BURST
MODE 4 -----------------X
4
4
ROUND BURST
MODE 5 -----------------X 5
5
ROUND BURST
TURN OFF --------------X
6
DISABLE
BURST MODE
Notes:
-You must have Rapid Fire Enabled to Enable Burst Mode. If Rapid Fire is not Enabled, Enabling Burst
Mode will fail.
Gameplay Tips:
-Combine Burst Modewith a Weapon’s Optimal Max Fire Rate to increaseaccuracy and save on Ammo.
, then
Hold
Tap
X
Mode #, then
Release

GamerModz PS4 –SPS-X3 Ver 4.0 8
INSTRUCTION MANUAL
LED PRO BUTTONS FOR PS4
(OPTIONAL ACCESSORY)
The GamerModz LED Pro Buttons allows you to remap the following buttons to either of the Pro Buttons:
A, B, X, Y, LB, RB, LT, RT, L3, R3, D-Pad Up, D-Pad Down, D-pad Left, D-Pad Right
NOTE: Guide Button,Menu Button and ViewButton Cannot be Remapped
Additionally, you we have given you the ability to have 5 Modes (Profiles) allowing you program 5 different
scenarios. The controllerwill save the profiles for you, even when you turn thecontroller off. You can change
any of the profilesat any time using the instruction below.
Cycling Through PRESETS
To cycle through the Presets hold the Left Thumbstick and Tap Left on the D-Pad the number of
times corresponding to the mode/preset you want. The Main LED will flash the number of times corresponding
to the mode/preset chosen. Additionally, if presets 1-5 are chosen, the LED Pro Mods will Light Up.
TAP UP ON D-PAD
PRESET
1 TIME
PRESET 1
2 TIMES PRESET 2
3 TIMES
PRESET 3
4 TIMES
PRESET 4
5 TIMES
PRESET 5
6 TIMES
OFF
, X Times
TAP
, then
Hold
Release

GamerModz PS4 –SPS-X3 Ver 4.0 9
Disabling Pro Buttons
To disable the Pro Buttons, Left Thumbstick and Tap Left on the D-Pad 6 Times . The PS4 Controller
LED will flash one time to indicate that the Pro Buttons have been off.
Programming a Preset for Button Remapping
To program a Pre-Set, first cycle to the Preset you wish to program (Refer to Instructions Above). Once you are
in the Preset you want to Program, hold the Left Thumbstick and Left on D-Pad until the Main LED
begins to flash indicating you are in programming mode.
Once you are in programming mode, simply hold the button you want to remap, tap the Pro Button you
would like to remap it to, then release. The Main LED will flash once letting you know that the remap was
successful. Repeat thisstep to assign another buttonto the other Pro Button.
Once you have finished assigning remaps to the Pro Buttons, hold the Left Thumbstick and Left on D-Pad
to save the Preset. The Main LED will flash5 times, letting youknow that you have successfully saved the
Preset.
You can then repeat the above steps to Program allof your presets. Note that your presets will be saved even
after you turn your controller off.
****** Important! Read Below! ******
The GamerModz LED Pro Buttons allows you to remap the following buttons/actions:
S, O, T, X, L1, R1, L2, R2, L3, R3, D-Pad Up, D-Pad Down, D-pad Left, D-Pad Right
NOTE: Guide Button,Menu Button and ViewButton Cannot be Remapped
, 6 Times
TAP
, then
Hold
Release

GamerModz PS4 –SPS-X3 Ver 4.0 10
Frequently asked questions
Q: My Controller is acting crazy! How do I get it to stop?
If you notice your controller is inputting all kinds of commands thatyou do not want, you may wantto
deactivate the unnecessarymods thatmay be active. If you are unsure what mods are active, simply perform
the MasterReset below.
Q: I’ve See GamerModz Controllers shoot really, really fast! But my Rapid Fire is really slow. What’s the
deal?
If your weapon is firing too slowly, it that either your weapon is not compatible with rapid fire (e.g. Rocket
Launcher) or it could mean that you do not have the Rapid Fire Shots per Second set high enough.
Q. My Rapid Fire is jumping or stuttering, how do I get it to stop?
If your rapid fire is not shooting consistently andseems to be stuttering, youhave set the Shots per Second too
high. This means the controller is trying to fire your weapon at a speed that is not compatible with the
particular game and weapon. Try decreasing your shots per second.
Q. What if I have a question that isn’t listed here!
That’s no problem, we’re happy to help. You can find us on Facebook, YouTube, Twitter, LiveChat via our Site or
by Phone. Give us a call Monday thru Friday, 9:00 am to 5:00 PM (EST) and a customer service representative
will assist you ASAP!
master reset
If you are experiencing problems with your controller and would like to reset to factory default settings, turn
your controller off and then back. Then simply Hold Down the Right Trigger and Left Trigger, Tap the sequence
below , then Release Left Trigger and Right Trigger
tap
tap
tap
Hold
, then
tap