GamerModz xbox One – SPS-X3 User manual

INSTRUCTION MANUAL
xbox One –SPS-X3 VER 3.0
Congratulations, welcome to the GamerModz Family! You are now a proud owner of a GamerModz Custom
Controller.
The SPS-X3 - Ver 3.0 for XBOX One is our premier Rapid Fire Controller and features 15 pre-set rapid fire modes
for ease of use and 5 adjustable rapid fire modesto save your specific settings.
This controller also comes with 3Additional Mods – Left Trigger Rapid Fire, Dual Trigger Rapid Fire (Akimbo) and
Auto Burst. Our adjustable Rapid Fire is compatible with all major first person shooters (FPS) and allows you to
fine tune your rapidfire for your favorite titles.
Your new GamerModz SPS-X3 Controller includes the following mods:
•Rapid Fire (15 Pre-Set Modes).................................................................................................Page 2
•Adjustable Rapid Fire (5 Programmable Modes)....................................................................Page 3
•Left Trigger Rapid Fire .............................................................................................................Page 5
•Dual Trigger Rapid Fire (Akimbo) ............................................................................................Page 5
•Auto Burst (4 Modes)..............................................................................................................Page 6
Be sure to readthe instructions fully beforeoperating the XBOX One SPS-X3 – Ver 3.0 to maximize your
domination potential.
Happy Gaming!!!
IMPORTANT: Verify that your GamerModz SPS-X3 Controller is Version 3 by following the instructions below.
First turn your controller off and then on to turn off all mods. Then follow the instructions below. The LED
will flash the number of times corresponding to your version. For Example: The LED will flash 3 times
indicating Version 3.
tap
tap
tap
Hold
, then
GamerModz XBOX One –SPS-X3 Ver 3.0 1

Rapid Fire modes
Your GamerModz Controller comes with 20 Rapid FireModes.Modes 1 thru 5 are custom programmable
modes that are user re-programmable for quick access. Modes 6 thru 20 are preset modes ranging from 6 shots
per second to 20 shots per second.
Turn On/off Rapid fire quickly
To enable/disable Rapid Fire, Hold Down the Right Trigger , Tap Down on D-Pad , then Release the
Right Trigger . Note: If you turn Rapid Fire on this way, the SPS-X3 Controller will default tothe last Rapid
Fire Mode enabled.
Toggle between Rapid fire modes
To enter a rapid fire mode, Hold Down the Right Trigger , and tap Right on the D-Pad the amount of
times corresponding to the mode you would like to enter, then Release the Right Trigger . The XBOX One
Controller LED will flash the numberof times corresponding to the mode you selected. Afterthe LED flashes the
number of times corresponding to the Mode you have selected, the LED will flash in a heartbeat pattern, letting
you know that rapid fire is on.
MODE 1 ---------------- X 1CUSTOM MODE 11 ----------------- X 11 11 SHOTS PER SECOND
MODE 2 ---------------- X 2CUSTOM MODE 12 ----------------- X 12 12 SHOTS PER SECOND
MODE 3 ---------------- X 3CUSTOM MODE 13 ----------------- X 13 13 SHOTS PER SECOND
MODE 4 ---------------- X 4CUSTOM MODE 14 ----------------- X 14 14 SHOTS PER SECOND
MODE 5 ---------------- X 5CUSTOM MODE 15 ----------------- X 15 15 SHOTS PER SECOND
MODE 6 ---------------- X 66SHOTS PER SECOND MODE 16 ----------------- X 16 16 SHOTS PER SECOND
MODE 7 ---------------- X 77SHOTS PER SECOND MODE 17 ----------------- X 17 17 SHOTS PER SECOND
MODE 8 ---------------- X 88SHOTS PER SECOND MODE 18 ----------------- X 18 18 SHOTS PER SECOND
MODE 9 ---------------- X 99SHOTS PER SECOND MODE 19 ----------------- X 19 19 SHOTS PER SECOND
MODE 10 ------------- X 10 10 SHOTS PER SECOND MODE 20 ----------------- X 20 20 SHOTS PER SECOND
, then
x
Mode #
tap
, then
Hold
Release
, then
Hold
tap
Release
GamerModz XBOX One –SPS-X3 Ver 3.0 2

Adjustable rapid
Fire modes
Your GamerModz SPS-X3 Controller comes with 5 Programmable Modes -Modes 1 thru 5. To program a Mode,
you mustfirst select the mode (Reference “Toggle Between Rapid Fire Modes” on Page 2).
Once you are in the Mode you wish to Program (Only applies to Modes 1 thru 5) follow the instructions below
to Program that Mode. Your GamerModz SPS-X3 Controller will remember the Re-Programmable Mode settings
even after you turn your controller off. Please Note: You must be in Right Trigger Mode (Default) to Program
an Adjustable Rapid Fire Mode.
Programming adjustable Rapid fire modes
Once you are in the Mode you wish to Program, Hold Down the Right Trigger , then Hold Down Right on D-
Pad until the LED begins to flash. Release both the Right Trigger and Right on D-Pad .
Once in Programming Mode you can adjust your shots per second by Tapping Up on D-Pad to Increase
Shots per Second and by Tapping Down on the D-Pad to Decrease Shots per Second. Note: Each time
you Tap the D-Pad, your Rate of Fire will Increase or Decrease 1 Shot per Second.
To test the Rapid Fire Rate, fire your weapon by pulling the Right Trigger . Adjust your Rapid Fire Rate by
Tapping Up or Down on the D-Pad until the desired smoothness and rate of fire is achieved. Please
see graph on Page 4 for Reference.
Once you have the desired Rapid Fire Setting, Tap Right on D-Pad to lock in the rate of fire. The XBOX
One LED will flash the number times corresponding to your rate of fire and then return to heartbeat flashes.For
Example: 12 Shots per Second, The LED will flash 12 times, then return to heartbeat flashes.
, then
= Lock Rate of Fire
= Decrease Rate of Fire
= Increase Rate of Fire
Until LED
Begins to Flash
, then
Hold
Release
Hold
GamerModz XBOX One –SPS-X3 Ver 3.0 3

Optimizing
Adjustable rapid Fire
The below graph is a visual representation on how Adjustable Rapid Fire works for your GamerModz SPS-X3
Controller. This will help you manually adjust your RapidFire to the optimal rate of fire by understanding how
GamerModz Rapid Fire works.
Notes:
-It is possible for the RapidFire to be so fast that it does not register inthe game. If this occurs, try
slowing it down at times.
-Slowing automatic weapons down to reduce recoil and increase accuracy can be effective too.
GOAL
Weapon optimal rate
- Rapid Fire Rate +
Faster than Max Fire Rate
Weapon is Stuttering orNot Firing at All
MAX Weapon Fire Rate
Weapon is Firing too Slowly
Slower than MAX Fire Rate
GamerModz XBOX One –SPS-X3 Ver 3.0 4

mods
Your GamerModz SPS-X3 Controller comes with 3 Additional Mods that can be turned on oroff independently
of each other. Some mods work with Rapid Fire while others do not. Some modswork with each other (See
Page 7 for Reference).
Left Trigger Rapid fire mod
Left Trigger Rapid Fire allows you to assign rapid fireto your left trigger only. Note: You must first have a Rapid
Fire Mode turned on (See Page 2) to enable Left Trigger Mod.
To enable/disable Left Trigger Rapid Fire, Hold Down the Left Trigger and Tap Down on the D-Pad .
Then Release Left trigger .The XBOX One Controller LED will flash one time to indicate that the Left
Trigger Rapid Fire Mode has been toggled on/off.
dual Trigger Rapid fire mod (akimbo)
Dual Trigger Rapid Fire (Akimbo) allows you to assign rapid fire to both the Left Trigger and Right Trigger, giving
you a greater advantage when dual wielding. Note: You must first have a rapid fire mode turned on (See Page
2).
To enable/disable Dual Trigger Rapid Fire (Akimbo), Hold Down the Left Trigger and Right Trigger and
Tap Down on the D-Pad . Then Release Both Triggers . The XBOX One Controller LED will flash
one time to indicate that the Dual Trigger Rapid Fire Mode has been toggledon/off.
, then
Hold
Tap
, then
Release
, then
Hold
Tap
, then
Release
GamerModz XBOX One –SPS-X3 Ver 3.0 5

Burst mode
Burst Mode allows you to set the number of shots fired with each trigger pull. Your GamerModz SPS-X3
Controller comes with 4 Settings for Burst Mode.
To enable Burst Mode - Rapid Fire must first be enabled (See Page 2 “Toggle Between Rapid Fire Modes”)–
Hold Down the Right Trigger and Tap Up on the D-Pad the numberof times corresponding to the
Burst Mode below. Then Release the Right Trigger .The XBOX One Controller LED will flash the number of
times corresponding tothe mode selected, indicatingthat Burst Mode has been toggled on.
To disable Burst Mode Hold Down the Right Trigger and Tap Up on the D-Pad 6 or More times, then
Release the Right Trigger .The XBOX One Controller LED will flash one time to indicate that BurstMode
has been toggled off.
MODE 2 -----------------X 2
2
ROUND BURST
MODE 3 -----------------X 3
3
ROUND BURST
MODE 4 -----------------X 4
4
ROUND BURST
MODE 5 -----------------X 5
5
ROUND BURST
TURN OFF --------------X 6DISABLE BURST MODE
Notes:
-You must have Rapid Fire Enabled to Enable Burst Mode. If Rapid Fire is not Enabled, Enabling Burst
Mode will fail.
Gameplay Tips:
-Combine Burst Modewith a Weapon’s Optimal Max Fire Rate to increaseaccuracy and save on Ammo.
MODE 3 -----------------X 3CUSTOM
MODE 4 -----------------X 4CUSTOM
MODE 5 -----------------X 5CUSTOM
, then
Hold
Tap
X
Mode #, then
Release
GamerModz XBOX One –SPS-X3 Ver 3.0 6

Quick reference Guide
Below is a quick referencechart showing what mods work with eachother as well as some additional
information on the functionality of your GamerModz SPS-X3 controller.
Rapid Fire Left Trigger Rapid Fire Dual Trigger Rapid
Fire Auto Burst
Rapid Fire
Left Trigger Rapid Fire
Dual Trigger Rapid
Fire
Auto Burst
GamerModz XBOX One –SPS-X3 Ver 3.0 7

Frequently asked questions
Q: My Controller is acting crazy! How do I get it to stop?
If you notice your controller is inputting all kinds of commands thatyou do not want, you may want to
deactivate the unnecessary mods thatmay be active. If you are unsurewhat mods are active, simply perform
the MasterReset below.
Q: I’ve See GamerModz Controllers shoot really, really fast! But my Rapid Fire is really slow. What’s the
deal?
If your weapon is firing too slowly, it that either your weapon is not compatible with rapid fire (e.g. Rocket
Launcher) or it could mean that you do not have the Rapid Fire Shots per Second set high enough.
Q. My Rapid Fire is jumping or stuttering, how do I get it to stop?
If your rapid fire is not shooting consistently andseems to be stuttering,you have set the Shots perSecond too
high. This means the controller is trying to fire your weapon at a speed that is not compatible with the
particular game and weapon. Try decreasing your shots per second.
Q. What if I have a question that isn’t listed here!
That’s no problem, we’re happy to help. You can find us on Facebook, YouTube, Twitter, LiveChat via our Site or
by Phone. Give us a call Monday thru Friday, 9:00 am to 5:00 PM (EST) and a customer service representative
will assist you ASAP!
master reset
If you are experiencing problems with your controller and would like to reset to factory default settings, turn
your controller off and then back. Then simply Hold Down the Right Trigger and Left Trigger, Tap the sequence
below , then Release Left Trigger and Right Trigger
tap
tap
tap
Hold
, then
tap
GamerModz XBOX One –SPS-X3 Ver 3.0 8