Gametime RockScape 90091 User manual

R
ISSUED/REVISED:
1−800−235−2440
INSTALLATION
PARTS LIST
DETAIL
REFERENCE
=
=
90091
ROCKSCAPE
5/29/15
90091
4’−0" ROCKSCAPE
900924’−6" ROCKSCAPE
900935’−0" ROCKSCAPE
90095
6’−0" ROCKSCAPE
A Company
90096
6’−6" ROCKSCAPE
90097
7’−0" ROCKSCAPE
R
INSTALLATION
INSTRUCTIONS
1. Before assembling this equipment, read the
enclosed INSTALLATION INSTRUCTIONS in
the installation booklet; follow all the instructions
during installation.
2. Assemble parts as shown in the ASSEMBLY
DRAWING. Refer to the assembly details for the
specific hardware required in each connection.
TOP VIEW
90091, 90092, & 90093
ASSEMBLY DRAWING
90091
YEARS OLD
CHILDREN
This play equipment
is designed for
Adult supervision
is recommended
Enriching Childhood Through Play.
www.gametime.com
sm
INSIDE
UNDERNEATH UNDERNEATH
INSIDE
1
553
553
6552
4
5
3
6'-3 1/16" [190.66cm]
4'-6 1/8" [137.55 cm]
7'-5 5/16" [226.85cm]
4'-6 1/8" [137.55 cm]
TOP VIEW
90095, 90096, & 90097
REFER TO MODULAR EQUIPMENT
TOP VIEW FOR CORRECT ROCKSCAPE
ARCHWAY PACKAGE NUMBER.

2PAGE
NOTE: HOLE DEPTHS INDICATED ON ALL
GROUND PLANS ARE MEASURED FROM
THE FINISHED SURFACE. SEE DETAIL 032.
ALL FOOTING DIMENSIONS ARE BASED
ON LEVEL FINISHED SURFACE.
CONCRETE REQUIRED:
.30 CUBIC YARDS
.23 CUBIC METERS
0'-10 1/2" [26.66 cm]
1'-5 1/2" [44.44 cm]
2'- 1/2" [62.22 cm]
2'-11" [88.89 cm]
3'- 5/16" [92.22 cm]
4'-1" [124.46 cm]
2'-4 3/16" [71.60cm]
2'-4 15/16" [73.50cm]
2'-9 15/16" [86.20cm]
5'-1 7/16" [156.05cm]
5'-2 7/16" [158.59cm]
GROUND PLAN
90091, 90092, & 90093
ASSEMBLY DRAWING
90093 & 90097
553
1
553
6
4
5
3
552
UNDERNEATH
INSIDE
UNDERNEATH
INSIDE
1'-2" [35.56cm] DIA. x
2'-6" [76.20cm] DEEP
(5 REQ'D)
EXISTING UPRIGHTS
REFER TO MODULAR EQUIPMENT
TOP VIEW FOR CORRECT ROCKSCAPE
ARCHWAY PACKAGE NUMBER.

3PAGE
NOTE: HOLE DEPTHS INDICATED ON ALL
GROUND PLANS ARE MEASURED FROM
THE FINISHED SURFACE. SEE DETAIL 032.
ALL FOOTING DIMENSIONS ARE BASED
ON LEVEL FINISHED SURFACE.
CONCRETE REQUIRED:
.48 CUBIC YARDS
.37 CUBIC METERS
555
1
555
2
5
5
3
4
555
555 552
INSIDE
INSIDE UNDERNEATH
0'-4" [10.16 cm]
0'-8 1/2" [21.59 cm]
0'-10 1/2" [26.67 cm]
2'- 1/2" [62.22 cm]
2'-11" [88.89 cm]
3'-2" [96.52 cm]
3'-3 1/2" [100.33 cm]
3'-9 1/4" [114.94 cm]
4'-1" [124.46 cm]
1'-10" [55.88 cm] (TYP.)
2'-5" [73.69 cm]
3'-11" [119.38 cm] (TYP.)
5'-2 1/2" [158.78 cm]
6'-2" [187.96 cm] (TYP.)
EXISTING UPRIGHTS
1'-2" [35.56cm] DIA. x
2'-6" [76.20cm] DEEP
(8 REQ'D)
ASSEMBLY DRAWING
90095
GROUND PLAN
90095, 90096, & 90097
REFER TO MODULAR EQUIPMENT
TOP VIEW FOR CORRECT ROCKSCAPE
ARCHWAY PACKAGE NUMBER.

4PAGE
3
5
5
4
2
555
1
555
552
555
555
ASSEMBLY DRAWING
90092 & 90096
REFER TO MODULAR EQUIPMENT
TOP VIEW FOR CORRECT ROCKSCAPE
ARCHWAY PACKAGE NUMBER.

5PAGE
Parts List
PART NUMBER900979009690095900939009290091
DESCRIPTION
REF.
179279111111
ROTOMOLD 48" ROCK
1
179325111000
ROTOMOLD 36" ROCK
2
179423000111
LONG FOOTBUCK POST
3
179429111000
LONG FOOTBUCK POST
3
179420000111
SHORT FOOTBUCK POST
4
179433111000SHORT FOOTBUCK POST4
200815000222
ROUND FOOTBUCK
5
179417666000ROUND FOOTBUCK
5
179426000111
SQUARE FOOTBUCK
6
204080000111
204081111000
812051*2424241010103/8" x 1 1/4" P.B.H.C.S. w/PATCH
812055*
444444
3/8" x 2" P.B.H.C.S. w/PATCH
801021*9990003/8" x 6" HEX HEAD BOLT
817410*
444444
3/8" FLAT WASHER
817334*3737371414143/8" LOCKWASHER
817412*
444444
1/2" FLAT WASHER
179801*333333PLASTIC SPACER
179497*
444444
MOLDED BOLT GUARD
HARDWARE COMPLETE
HARDWARE COMPLETE
* Included in Hardware
Warning: During Installation, Hardware And Small Parts Are Choking Hazards
For Young Children. Store Unused Parts Appropriately Until Assembly Is Completed.
Once Assembly Is Completed, Remove Any Unused Parts From The Play Environment
And Dispose/Save Them In A Secure Location.
Unless Otherwise Specified, All Units of Measure are Each
Note: Peen Tee-Nuts and Flatwashers to match radius of pipe after assembly is complete.
Note: Loctite (supplied by others) should be used on any non-patch hardware.

6PAGE
IMPORTANT
TO REDUCE THE RISK OF CLOTHING ENTANGLEMENT IN COMPLIANCE WITH ASTM F1487, ANY BOLT END
PROTRUDING MORE THAN TWO FULL THREADS BEYOND THE FACE OF THE NUT SHALL BE CUT-OFF FLUSH, FILED
SMOOTH AND TREATED TO PREVENT CORROSION.
NOTE: LOCTITE (SUPPLIED BY OTHERS) SHOULD BE USED ON ALL THREADED HARDWARE.
NOTE: AFTER ASSEMBLY IS COMPLETE, PEEN TEE-NUTS AND FLATWASHERS TO MATCH RADIUS OF PIPE.
13
23456
90091, 90092, 90093, 90095, 90096, & 90097
DETAILS −for−
1
0INCH
0CM 123 6457 8 9 10 1211 14 15
1'-0"
[30.48 cm]
VARIES
(REFER TO OVERALL
SHOCK ABSORBING
MATERIAL
3.9" [10.00 cm]
MAX.
45~MIN.
CONCRETE
BRICK OR
EQUIVALENT
SHOCK ABSORBING PROPERTIES OF SURFACING
MATERIALS VARY. IF YOU DETERMINE THAT LESS
THAN 1'-0" [30.48cm] OF SURFACING IS REQUIRED,
MAKE UP THE DIFFERENCE IN ELEVATION WITH
EARTH, BEFORE APPLYING SURFACING.
"A"
"B"
UNIT GROUND PLAN)
1 1/16" [2.70 cm]
1 5/16" [3.33 cm]
1 5/8" [4.13 cm]
1 7/8" [4.83 cm]
2 3/8" [6.03 cm]
3 1/2" [8.89 cm]
5" [12.70 cm]
5" [12.70 cm]
TRACK RIDE & SWINGS
(PIPE SIZE)
DIA. "A"
1'-2" [35.56 cm]
1'-6" [45.72 cm]
1'-6" [45.72cm]
2'-0" [60.96 cm]
1'-2" [35.56 cm]
1'-2" [35.56 cm]
1'-2" [35.56 cm]
1'-2" [35.56 cm]
(FOOTING SIZE)
DIA. "B"
-SUGGESTED MINIMUM CONCRETE
OF EUROPEAN STANDARD EN1176-1 ONLY
-SLOPED FOOTING IS A REQUIREMENT
RATING: 3000 PSI
NOTES:
BRICK OR
DIMENSIONED
TO TOP OF 5" [12.70 cm]
TREE SCAPE
4'-0" [121.92 cm]
EARTH
EQUIVALENT
032

7PAGE
IMPORTANT
TO REDUCE THE RISK OF CLOTHING ENTANGLEMENT IN COMPLIANCE WITH ASTM F1487, ANY BOLT END
PROTRUDING MORE THAN TWO FULL THREADS BEYOND THE FACE OF THE NUT SHALL BE CUT-OFF FLUSH, FILED
SMOOTH AND TREATED TO PREVENT CORROSION.
NOTE: LOCTITE (SUPPLIED BY OTHERS) SHOULD BE USED ON ALL THREADED HARDWARE.
NOTE: AFTER ASSEMBLY IS COMPLETE, PEEN TEE-NUTS AND FLATWASHERS TO MATCH RADIUS OF PIPE.
13
23456
90091, 90092, 90093, 90095, 90096, & 90097
DETAILS −for−
1
0INCH
0CM 123 6457 8 9 10 1211 14 15
552
ROTOMOLD
3/8" LOCKWASHER
(817334)
3/8" x 1 1/4"
P.B.H.C.S. w/PATCH
(812051)
FOOTBUCKS

8PAGE
IMPORTANT
TO REDUCE THE RISK OF CLOTHING ENTANGLEMENT IN COMPLIANCE WITH ASTM F1487, ANY BOLT END
PROTRUDING MORE THAN TWO FULL THREADS BEYOND THE FACE OF THE NUT SHALL BE CUT-OFF FLUSH, FILED
SMOOTH AND TREATED TO PREVENT CORROSION.
NOTE: LOCTITE (SUPPLIED BY OTHERS) SHOULD BE USED ON ALL THREADED HARDWARE.
NOTE: AFTER ASSEMBLY IS COMPLETE, PEEN TEE-NUTS AND FLATWASHERS TO MATCH RADIUS OF PIPE.
13
23456
90091, 90092, 90093, 90095, 90096, & 90097
DETAILS −for−
1
0INCH
0CM 123 6457 8 9 10 1211 14 15
553
NOTE: TOP OF BOLT
GUARD SHOULD BE
FLUSH WITH ROTOMOLD
PLASTIC.
SHORT FOOTBUCK
POST (179420)
LONG FOOTBUCK
POST (179423)
PLASTIC SPACER
(179801)
ROTOMOLD
BOLT GUARD BASE
BOLT GUARD CAP
PLASTIC SPACER
(179801)
1/2" FLAT WASHER
(817412)
3/8" FLAT WASHER
(817410)
3/8" LOCKWASHER
(817334)
3/8" x 2" P.B.H.C.S.
w/PATCH (812055)

9PAGE
IMPORTANT
TO REDUCE THE RISK OF CLOTHING ENTANGLEMENT IN COMPLIANCE WITH ASTM F1487, ANY BOLT END
PROTRUDING MORE THAN TWO FULL THREADS BEYOND THE FACE OF THE NUT SHALL BE CUT-OFF FLUSH, FILED
SMOOTH AND TREATED TO PREVENT CORROSION.
NOTE: LOCTITE (SUPPLIED BY OTHERS) SHOULD BE USED ON ALL THREADED HARDWARE.
NOTE: AFTER ASSEMBLY IS COMPLETE, PEEN TEE-NUTS AND FLATWASHERS TO MATCH RADIUS OF PIPE.
13
23456
90091, 90092, 90093, 90095, 90096, & 90097
DETAILS −for−
1
0INCH
0CM 123 6457 8 9 10 1211 14 15
555
ROTOMOLD 36" ROCK
(179325)
NOTE: TOP OF BOLT
GUARD SHOULD BE
FLUSH WITH ROTOMOLD
PLASTIC.
3/8" x 6" HEX HEAD BOLT
(801021)
3/8" LOCKWASHER
(817334)
3/8" FLATWASHER
(817424)
3/4" FLATWASHER
(817420)
LONG FOOTBUCK POST
(179429)
SHORT FOOTBUCK
POST (179433)
1/2" FLATWASHER
(817412)
BOLT GUARD BOTTOM
(179497)
3/8" FLATWASHER
(817410)
3/8" LOCKWASHER
(817334)
3/8" x 2" B.H.C.S.
w/PATCH (811055)
BOLT GUARD CAP
(179497)
1/2" FLATWASHER
(817412)
PLASTIC SPACER
(179801)
BOLT GUARD BASE
3/8" FLATWASHER
(817410)
3/8" LOCKWASHER
(817334)
3/8" x 2" P.B.H.C.S.
w/PATCH (812055)
BOLT GUARD CAP