Garden Trading Marlborough Cabinet User manual

Marlborough Cabinet
Assembly Instructions
Please read through these instructions and ensure they are kept for future reference.
All parts and hardware are listed on the back of this guide.
Please ensure the unit is securely xed to the wall to avoid tipping. Fixings are not supplied.
Please ensure you source and use correct plugs and screws for the surface you are xing this
product to.
Customer Services:
gardentrading.co.uk
[phone]
[email protected]
Opening Hours: Monday - Friday: 8.30am - 5.30pm (Friday close at 5.00pm)
The Garden Trading Company Ltd, Carterton South Industrial Estate, Black Bourton Road, Carterton, Oxon, OX18 3EZ
Cabinet Care Instructions
Dust regularly with a clean dry cloth.
Wipe up any spills immediately with a damp cloth and then dry the surface with a clean dry cloth.
Never use abrasive or corrosive cleaning agents.
Always use place mats and coasters to protect the surface from moisture and heat. Avoid sharp objects
scratching the surface.
Avoid placing on uneven surfaces.
Do not drag furniture, always lift to move.
Maximum Weight Capacity
Top Panel: 30kg
Shelf: 25kg (each)
Bottom Panel:25kg
Storage Locker Parts & Hardware
A
x2 Side Panels x2 Back Panels
x2 Doors
x2 Legs
x1 Top Panel
x1 Bottom Panel x2 Shelves
F G
B
E
C D
H
x2 x2
x4
x4 x2 x8
6 X 30mm 12 X 0.8mm 4 X 4mm
9 X 0.8mm
L M
I J
K
A
A
D
E
E
F
G
GB1
C1
C2
B2

1. Stand both legs (E) up and push the side
panels (A) down onto the legs. 2.
4.
Assemble the back panels (B) by
slotting them together.
Insert the bottom panel (F), starting
from the front and pushing it all the
way down into place
3. Assemble the back panels (B) onto the standing
structure and bend the tabs in the four corners,
to x in place
5. 6.
Add the top panel (D), starting from the front.
Align the top with all the side and back panels and
push down with enough force to click it into place.
Check from all angles that the side and back panels
have slotted in correctly.
Insert the shelf brackets (M) and
the shelves (G).
7. 8.
Insert the metal post (H) and washer (I) in the hole
in the leg. Hinge the door (C) onto the post. Push
down and hold the metal hinge button at the top
of the door. Slide the door in place, releasing the
hinge to x into position within the top panel.
Repeat for second door.
Using a screwdriver attach the handles
(L) with the small screws (J) and small
washers (K).
Push and
bend the tab
Make sure the
holes are nearest
to the outside