Garden Trading Marlborough Storage Locker User manual

Marlborough Storage Locker
Assembly Instructions
Please read through these instructions and ensure they are kept for future reference. All parts
and hardware are listed on the back of this guide.
Please ensure the unit is securely xed to the wall to avoid tipping. Fixings are not supplied.
Please ensure you source and use correct plugs and screws for the surface you are xing this
product to.
Customer Services:
gardentrading.co.uk
[phone]
[email protected]
Opening Hours: Monday - Friday: 8.30am - 5.30pm (Friday close at 5.00pm)
The Garden Trading Company Ltd, Carterton South Industrial Estate, Black Bourton Road, Carterton, Oxon, OX18 3EZ
Storage Locker Parts & Hardware
Storage Locker Care Instructions
Dust regularly with a clean dry cloth.
Wipe up any spills immediately with a damp cloth and then dry the surface with a clean dry cloth.
Never use abrasive or corrosive cleaning agents.
Always use place mats and coasters to protect the surface from moisture and heat. Avoid sharp objects
scratching the surface.
Avoid placing on uneven surfaces.
Do not drag furniture, always lift to move.
Maximum weight capacity
Top Panel: 30kg
Shelf: 10kg
Bottom Panel: 15kg
A
A
A
x2 Side Panels x2 Back Panels x2 Doors x1 Top Panel
x2 Legs x1 Bottom Panel x1 Shelves
E F G
B C D
E
E
B2
D
G
C2
H
x2 x2 x2
x4 x4 x2 x4
6 X 70mm 6 X 30mm 12 X 0.8mm
30 X 13mm
4 X 4mm 9 X 0.8mm
L M N
I J
K
C1
F
B1

1. 5.
7.
2. 6.
8.4.3.
Stand both legs (E) up and push the side panels (A)
down onto the legs.
Add the top panel (D), starting from the front.
Align the top with all the side and back panels and
push down with enough force to click it into place.
Check from all angles that the side and back panels
have slotted in correctly.
Insert the metal post (I) and
washer (J) in the hole in the leg.
Assemble the back panels (B) onto the standing
structure and bend the tabs in the four corners, to
x in place.
Assemble the back panels (B) by
slotting them together.
Insert the shelf brackets (N) and
the shelf (G).
Slide the door down on the post and into correct
position against the cabinet. At the top of the
door, insert L-shape post up into position through
the holes and bend the tab to secure in place.
Using a screwdriver attach the handles (M) with
the small screws (K) and small washers (L).
Insert the bottom panel (F), starting
from the front and pushing it all the
way down into place.
B2 B1
Push and bend the tab
Push and
bend the tab
Make sure the holes are
nearest to the outside