Garmin GPSMAP 376C User manual

GPSMAP®376C Quick Reference Guide
Finding Items
To nd a waypoint or other item from your current location:
1. From any page, press FIND.
2. Highlight a category from the list, and press ENTER.
3. Highlight an item in the results list, and press ENTER.
Find Menu Navaid Search Results
To nd an item from another location using the Find menu:
1. From any page, press FIND.
2. Press MENU. Highlight Near Other, and press ENTER.
3. Select a reference point on the map, and press ENTER. The list
shows items nearest to the new map location.
To nd an item from another location on the Map Page:
1. From the Map Page, use the ROCKER to pan to the location you
want, and press FIND.
2. Highlight a category from the list, and press ENTER.
3. Highlight an item in the results list, and press ENTER.
Find From Map Pointer Search Results
Going to a Destination
To Go To a highlighted map item:
1. Use the ROCKER to highlight the item you want to navigate to on the
Map Page.
2. Press NAV/MOB, and then press ENTER.
3. Follow the magenta route created on the Map Page. You can also
use the Compass Page to help you navigate to the point.
Navigation shown on the
Map Page (Marine Mode)
Navigate Options with Map
Feature highlighted
To activate a Go To from the Find Menu:
1. Press the NAV/MOB key.
2. Use the ROCKER to highlight Go To Point, and press ENTER.
3. From the Find menu, highlight Waypoints, and press ENTER.
4. Select a waypoint from the list, and press ENTER to open the
Waypoint Review Page.
5. With the Go To button highlighted, press ENTER to begin navigation.
Using the Man OverBoard (MOB) Feature
Use the MOB function to simultaneously mark and set a course to a location
for quick response to emergency situations.
To start the MOB function:
1. Press and hold the NAV/MOB key, or press the NAV/MOB key twice.
2. Press ENTER to conrm and begin navigating to the MOB location.
MOB Conrmation Window
When a MOB is initiated, a MOB waypoint is created, and the unit begins to
navigate to that point. Use any of the navigation pages to guide you back to
the MOB point. The MOB waypoint is stored in the Waypoint list and can be
deleted like any other waypoint.
190-00508-01 Rev. B © Copyright 2006 Garmin Ltd. or its subsidiaries Printed in Taiwan
IN/OUT—press to zoom in or zoom out on the Map Page.
PAGE/MODE—press to cycle through the main pages in sequence
and return the display from a submenu page. Press and hold to switch
between Marine Mode and Automotive Mode.
QUIT—press to cycle through the main pages in reverse sequence,
revert to the previous value in a data entry eld, or cancel a function.
ENTER/MARK—press to select a highlighted option, initiate entry,
and then conrm. Press and hold to mark a waypoint.
MENU/Wx—press to view Options Menu for the current page. Press
twice to open the Main Menu. Press and hold to turn the Map Page
weather off and on.
NAV/MOB—press to open the Navigation Menu window. In Marine
Mode, press and hold to activate the MOB function. In Automotive
Mode, press and hold to show the Next Turn Page and have the voice
prompt announce the next turn.
FIND—press to show the Find Menu.
POWER—press and hold to turn the unit on or off. Press and release
to adjust the backlighting and external speaker volume.
ROCKER—press up, down, left, or right to select menu options,
enter data, or move the pointer on the Map Page.
The GPS antenna
must be in the
upright position to
receive satellite
signals.

Creating a Route
To create a route using the Find Menu:
1. Press MENU twice to open the Main Menu.
2. Highlight the Route tab.
3. Highlight the rst available blank route slot, and press ENTER.
4. Press ENTER again to nd items to add to the route.
Route Tab Adding points to the route
To create a route graphically:
1. From the Route tab, highlight the rst blank slot, and press ENTER.
2. On the Route Review Page, press MENU to open the options menu.
3. Highlight Edit on Map, and press ENTER.
4. Highlight a map item, and press ENTER.
5. When nished press QUIT twice to return to the Route Review Page.
Route Review Page
Options Menu
Creating a new route on the map
Adding Via Points to Your Route
To add Via Points to your route in Automotive Mode:
1. While navigating your route, press NAV/MOB.
2. Use the ROCKER to select Edit Vias, and press ENTER. The
Add/Edit Vias Page appears.
3. With the Add Via Point button highlighted, press ENTER.
Navigate Options Add Via Point
4. Highlight either Use Map or Use Find Menu, and press ENTER.
5. If you selected Use Map, use the ROCKER to select an item on the
map, and press ENTER.
If you selected Use Find Menu, select an item from the Find Menu.
Remember you can press MENU while the Find Menu is open to nd
an item near another location, such as the destination.
6. Highlight Done, and press ENTER to apply the new Via Points to the
route.
Add/Edit Vias Page
New Via Point added before
the destination
Before a Via Point is added
Marking a Waypoint
To mark your current location:
1. Press and hold ENTER/MARK until
the New Waypoint Page appears.
2. To accept the waypoint with the default
name and symbol, highlight OK, and
press ENTER/MARK.
3. To change the any information on
the New Waypoint Page, highlight
the appropriate eld, and press ENTER/MARK. After entering and
conrming your changes, highlight OK, and press ENTER/MARK.
To create a new waypoint using the Map Page:
1. Press PAGE until the Map Page appears.
2. Move the pointer to a map location or map feature.
3. Press and quickly release ENTER/MARK to capture the pointer
location.
If you have highlighted a map feature, an information page appears
after you press ENTER/MARK. Use the ROCKER to highlight Save
and press ENTER/MARK to save the item as a waypoint. The New
Map Waypoint Page appears.
4. To accept the waypoint with the default name and symbol, highlight
OK, and press ENTER/MARK.
To change any information on the New Map Waypoint Page, highlight
the appropriate eld and press ENTER/MARK. After entering and
conrming your changes, highlight OK, and press ENTER/MARK.
Using XM WX Weather and XM Radio
To turn off XM WX Weather on the Map Page:
1. Press PAGE/MODE until the Map
Page appears.
2. Press and hold MENU/Wx. On
the Map Page, XM WX Weather is
turned off.
3. Press and hold MENU/Wx to turn
XM WX Weather on again.
To select an XM Radio channel:
1. Press MENU twice to open the Main Menu.
2. Use the ROCKER to highlight the XM tab.
3. Press right on the ROCKER to highlight the Audio sub tab.
4. Press up or down on the ROCKER to scroll through the list of
channels, highlight the channel you want, and then press ENTER.
Selecting an XM Radio channel Adding a channel to Favorites
To add a channel to the Favorites category:
1. Use the ROCKER to select a channel, or use the IN and OUT keys
to select a category, and then highlight a channel.
2. Press MENU, highlight Add To Favorites, and press ENTER.
3. With Yes highlighted, press ENTER again to add the channel to the
Favorites category.
4. To view Favorites, use the IN and OUT keys to change the category
to Favorites.
New Waypoint Page XM WX Weather
*XM®Radio and XM WX®Weather Data each require a monthly subscription, which is sold separately.
All programming fees and weather data are subject to change.