Garmin Gpsmap 8012 User manual

GPSMAP® 8000 Series

Owner’s Manual

products and to make changes in the content of this manual without obligation to notify any person or organization of such changes or improvements. Go to www.garmin.com for current updates

and supplemental information concerning the use of this product.

Garmin®, the Garmin logo, BlueChart®, g2 Vision®, GPSMAP®, FUSION®, Ultrascroll®, and VIRB® are trademarks of Garmin Ltd. or its subsidiaries, registered in the USA and other countries.

Fantom™, FUSION-Link™, Garmin Helm™, Garmin LakeVü™, Garmin Nautix™, Garmin Quickdraw™, GCV™, GMR™, GRID™, GXM™, HomePort™, MotionScope™, Panoptix™, quatix®, Shadow

Drive™, and SmartMode™ are trademarks of Garmin Ltd. or its subsidiaries. These trademarks may not be used without the express permission of Garmin.

iPod® is a trademark of Apple Inc., registered in the U.S. and other countries. Android™ is a trademark of Google™ Inc. CZone™ is a trademark of Power Products, LLC. FLIR® is a registered

trademark of FLIR Systems, Inc. SiriusXM® is a registered trademark of SiriusXM Radio Inc. Wi‑Fi® is a registered mark of Wi-Fi Alliance Corporation. Windows® is a registered trademark of

Microsoft Corporation in the United States and other countries. All other trademarks and copyrights are the property of their respective owners.

Table of Contents

Introduction.....................................................................1

Device Overview......................................................................... 1

Using the Touchscreen.......................................................... 1

On-Screen Buttons................................................................ 1

Tips and Shortcuts................................................................. 1

Locking the Touchscreen....................................................... 1

Accessing Owner's Manuals on the Chartplotter........................ 1

Downloading the Manuals.......................................................... 1

Getting More Information............................................................ 1

Inserting a Memory Card............................................................ 1

Software Update......................................................................... 2

Loading the New Software on a Memory Card...................... 2

Updating the Device Software............................................... 2

GPS Satellite Signals..................................................................2

Selecting the GPS Source..................................................... 2

Customizing the Chartplotter........................................ 2

Home Screen.............................................................................. 2

Adding an Item to Favorites................................................... 2

Customizing Pages..................................................................... 2

Customizing the Layout of a SmartMode or Combination

Page.......................................................................................2

Adding a SmartMode Layout................................................. 3

Adding a Custom Combination Screen.................................. 3

Customizing the Data Overlays............................................. 3

Resetting the Station Layouts................................................ 3

Presets........................................................................................3

Saving a New Preset............................................................. 3

Managing Presets.................................................................. 3

Setting the Vessel Type.............................................................. 3

Adjusting the Backlight............................................................... 3

Adjusting the Color Mode........................................................... 3

Charts and 3D Chart Views........................................... 3

Navigation Chart and Offshore Fishing Chart............................. 4

Zooming In and Out Using the Touchscreen......................... 4

Selecting a Map..................................................................... 4

Measuring a Distance on the Chart....................................... 4

Chart Symbols....................................................................... 4

Creating a Waypoint on the Chart..........................................4

Viewing Location and Object Information on a Chart............ 4

Viewing Details about Navaids.............................................. 4

Navigating to a Point on the Chart......................................... 4

Heading Line and Angle Markers.......................................... 5

Setting the Heading and Course Over Ground Lines....... 5

Turning on Angle Markers................................................. 5

Premium Charts.......................................................................... 5

Viewing Tide Station Information........................................... 5

Animated Tide and Current Indicators.............................. 5

Showing Tides and Current Indicators.............................. 6

Showing Satellite Imagery on the Navigation Chart.............. 6

Viewing Aerial Photos of Landmarks..................................... 6

Automatic Identification System..................................................6

AIS Targeting Symbols.......................................................... 6

Heading and Projected Course of Activated AIS Targets...... 6

Showing AIS and MARPA Vessels on a Chart or on a 3D

Chart View............................................................................. 7

Activating a Target for an AIS Vessel.................................... 7

Viewing Information about a Targeted AIS Vessel........... 7

Deactivating a Target for an AIS Vessel........................... 7

Viewing a List of AIS and MARPA Threats............................ 7

Setting the Safe-Zone Collision Alarm................................... 7

AIS Distress Signals.............................................................. 7

Navigating to a Distress Signal Transmission................... 7

AIS Distress Signal Device Targeting Symbols................ 7

Enabling AIS Transmission Test Alerts............................. 7

Turning Off AIS Reception..................................................... 7

Chart and 3D Chart View Settings.............................................. 7

Navigation and Fishing Chart Setup...................................... 8

Waypoints and Tracks Settings on the Charts and Chart

Views..................................................................................... 8

Chart Appearance Settings.................................................... 8

Other Vessels Settings on the Charts and Chart Views........ 8

Laylines Settings.................................................................... 9

Fish Eye 3D Settings............................................................. 9

Garmin Quickdraw™ Contours Mapping..................... 9

Mapping a Body of Water Using the Garmin Quickdraw

Contours Feature........................................................................ 9

Adding a Label to a Garmin Quickdraw Contours Map.............. 9

Garmin Quickdraw Community................................................... 9

Accessing the Garmin Quickdraw Community.......................9

Sharing Your Garmin Quickdraw Contours Maps with the

Garmin Quickdraw Community.............................................. 9

Downloading Garmin Quickdraw Community Maps............ 10

Garmin Quickdraw Contours Settings...................................... 10

Navigation with a Chartplotter.................................... 10

Basic Navigation Questions...................................................... 10

Destinations.............................................................................. 11

Searching for a Destination by Name.................................. 11

Selecting a Destination Using the Navigation Chart............ 11

Searching for a Marine Services Destination....................... 11

Stopping Navigation............................................................. 11

Waypoints................................................................................. 11

Marking Your Present Location as a Waypoint.................... 11

Creating a Waypoint at a Different Location........................ 11

Marking an SOS Location.................................................... 11

Viewing a List of all Waypoints............................................ 11

Editing a Saved Waypoint.................................................... 11

Moving a Saved Waypoint................................................... 11

Browsing for and Navigating to a Saved Waypoint.............. 11

Deleting a Waypoint or an MOB.......................................... 12

Deleting All Waypoints......................................................... 12

Setting and Following a Direct Course Using Go To........... 12

Routes...................................................................................... 12

Creating and Navigating a Route From Your Present

Location............................................................................... 12

Creating and Saving a Route............................................... 12

Viewing a List of Routes and Auto Guidance Paths............ 12

Editing a Saved Route......................................................... 12

Browsing for and Navigating a Saved Route....................... 12

Browsing for and Navigating Parallel to a Saved Route...... 12

Deleting a Saved Route....................................................... 13

Deleting All Saved Routes................................................... 13

Auto Guidance.......................................................................... 13

Setting and Following an Auto Guidance Path.................... 13

Creating and Saving an Auto Guidance Path...................... 13

Adjusting a Saved Auto Guidance Path............................... 13

Canceling an Auto Guidance Calculation in Progress......... 13

Setting a Timed Arrival.........................................................13

Auto Guidance Path Configurations.................................... 13

Adjusting the Distance from Shore..................................14

Tracks....................................................................................... 14

Showing Tracks................................................................... 14

Setting the Color of the Active Track................................... 14

Saving the Active Track....................................................... 14

Viewing a List of Saved Tracks............................................ 14

Editing a Saved Track.......................................................... 14

Saving a Track as a Route...................................................14

Browsing for and Navigating a Recorded Track.................. 14

Deleting a Saved Track........................................................14

Deleting All Saved Tracks.................................................... 14

Table of Contents i

Retracing the Active Track................................................... 14

Clearing the Active Track..................................................... 15

Managing the Track Log Memory During Recording........... 15

Configuring the Recording Interval of the Track Log........... 15

Boundaries................................................................................15

Creating a Boundary............................................................ 15

Converting a Route to a Boundary...................................... 15

Converting a Track to a Boundary....................................... 15

Editing a Boundary...............................................................15

Setting a Boundary Alarm.................................................... 15

Deleting a Boundary............................................................ 15

Synchronizing User Data Across the Garmin Marine

Network.....................................................................................15

Deleting All Saved Waypoints, Routes, and Tracks................. 15

Sailing Features............................................................ 15

Setting the Vessel Type............................................................ 15

Sail Racing................................................................................15

Starting Line Guidance........................................................ 16

Setting the Starting Line.................................................. 16

Using the Starting Line Guidance................................... 16

Starting the Race Timer....................................................... 16

Stopping the Race Timer..................................................... 16

Setting the Distance between the Bow and the GPS

Antenna................................................................................16

Laylines Settings.......................................................................16

Setting the Keel Offset.............................................................. 16

Sailboat Autopilot Operation..................................................... 17

Wind Hold............................................................................ 17

Setting the Wind Hold Type............................................ 17

Engaging Wind Hold....................................................... 17

Engaging Wind Hold from Heading Hold........................ 17

Adjusting the Wind Hold Angle with the Autopilot........... 17

Tack and Gybe.....................................................................17

Tacking and Gybing from Heading Hold......................... 17

Tacking and Gybing from Wind Hold.............................. 17

Setting a Tack and Gybe Delay...................................... 17

Enabling the Gybe Inhibitor............................................. 17

Sonar............................................................................. 17

Sonar Views..............................................................................17

Traditional Sonar View......................................................... 17

Garmin ClearVü Sonar View................................................ 18

SideVü Sonar View.............................................................. 18

SideVü Scanning Technology......................................... 18

Split-Zoom Sonar View........................................................ 18

Split-Frequency Sonar View................................................ 18

Panoptix Sonar Views.......................................................... 18

LiveVü Down Sonar View................................................18

LiveVü Forward Sonar View............................................19

RealVü 3D Forward Sonar View..................................... 19

RealVü 3D Down Sonar View......................................... 19

RealVü 3D Historical Sonar View....................................19

FrontVü Sonar View........................................................ 19

Changing the Sonar View.................................................... 19

Selecting the Transducer Type................................................. 19

Calibrating the Compass......................................................20

Creating a Waypoint on the Sonar Screen............................... 20

Measuring Distance on the Sonar Screen................................ 20

Pausing the Sonar Display....................................................... 20

Viewing Sonar History.............................................................. 20

Sonar Sharing........................................................................... 20

Selecting a Sonar Source.................................................... 20

Renaming a Sonar Source...................................................20

Adjusting the Level of Detail..................................................... 20

Adjusting the Color Intensity..................................................... 20

Adjusting the Range of the Depth or Width Scale.................... 21

Setting the Zoom Level on the Sonar Screen........................... 21

Setting the Scroll Speed........................................................... 21

Sonar Frequencies................................................................... 21

Selecting Frequencies......................................................... 21

Creating a Frequency Preset............................................... 21

Customizing the Panoptix Sonar Views.................................... 21

Adjusting the Appearance of the LiveVü Sonar Views........ 21

Setting the LiveVü Transducer Transmit Angle................... 22

Adjusting the RealVü Viewing Angle and Zoom Level......... 22

Adjusting the Appearance of the RealVü Sonar Views........ 22

Adjusting the RealVü Sweep Speed.................................... 22

Turning On the A-Scope........................................................... 22

Selecting the Transducer Type................................................. 22

Sonar Setup.............................................................................. 22

Sonar Settings..................................................................... 22

RealVü Sonar Settings.........................................................22

LiveVü Sonar Settings......................................................... 22

Sonar Noise Rejection Settings........................................... 23

Sonar Appearance Settings................................................. 23

Sonar Alarm Settings........................................................... 23

Advanced Sonar Settings.................................................... 23

Transducer Installation Settings...........................................23

Sonar Recordings..................................................................... 24

Recording the Sonar Display............................................... 24

Stopping the Sonar Recording............................................. 24

Deleting a Sonar Recording................................................. 24

Playing Sonar Recordings................................................... 24

Radar............................................................................. 24

Changing the Radar Mode....................................................... 24

Transmitting Radar Signals...................................................... 24

Stopping the Transmission of Radar Signals....................... 24

Setting Up the Timed Transmit Mode.................................. 24

Enabling and Adjusting a Radar No Transmit Zone............ 24

Adjusting the Radar Range...................................................... 25

Tips for Selecting a Radar Range........................................ 25

Zooming In and Out of the Radar Screen................................. 25

Marking a Waypoint on the Radar Screen................................ 25

MotionScope™ Doppler Radar Technology............................. 25

Enabling a Guard Zone............................................................ 25

Defining a Circular Guard Zone........................................... 25

Defining a Partial Guard Zone............................................. 25

Disabling a Guard Zone....................................................... 25

MARPA..................................................................................... 25

MARPA Targeting Symbols................................................. 26

Assigning a MARPA Tag to an Object................................. 26

Removing a MARPA Tag from a Targeted Object............... 26

Viewing Information about a MARPA-tagged Object........... 26

Viewing a List of AIS and MARPA Threats.......................... 26

Showing AIS Vessels on the Radar Screen........................ 26

VRM and EBL...................................................................... 26

Showing the VRM and the EBL...................................... 26

Adjusting the VRM and the EBL..................................... 26

Measuring the Range and Bearing to a Target Object... 26

Radar Overlay...........................................................................26

Radar Overlay and Chart Data Alignment........................... 26

Echo Trails................................................................................ 27

Turning on Echo Trails......................................................... 27

Adjusting the Length of the Echo Trails............................... 27

Clearing the Echo Trails.......................................................27

Optimizing the Radar Display................................................... 27

Radar Gain and Clutter........................................................ 27

Adjusting Gain on the Radar Screen Automatically........ 27

Adjusting Gain on the Radar Screen Manually............... 27

Minimizing Nearby Large-Object Interference.................27

Minimizing Side-Lobe Interference on the Radar

Screen............................................................................. 27

ii Table of Contents

Adjusting Sea Clutter on the Radar Screen

Automatically................................................................... 27

Adjusting Sea Clutter on the Radar Screen Manually..... 27

Adjusting Rain Clutter on the Radar Screen................... 28

Reducing Cross Talk Clutter on the Radar Screen......... 28

Radar Options Menu............................................................ 28

Radar Setup Menu............................................................... 28

Radar Appearance Settings................................................. 28

Radar Installation Settings................................................... 28

Front-of-Boat Offset........................................................ 28

Setting a Custom Park Position...................................... 28

Selecting a Different Radar Source.......................................... 29

Autopilot........................................................................ 29

Opening the Autopilot Screen................................................... 29

Autopilot Screen....................................................................... 29

Adjusting the Step Steering Increment................................ 29

Setting the Power Saver...................................................... 29

Enabling Shadow Drive™.................................................... 29

Engaging the Autopilot............................................................. 29

Adjusting the Heading with the Helm................................... 29

Adjusting the Heading with the Chartplotter in Step Steering

Mode.................................................................................... 29

Steering Patterns...................................................................... 29

Following the U-Turn Pattern............................................... 29

Setting Up and Following the Circles Pattern...................... 29

Setting Up and Following the Zigzag Pattern...................... 30

Following the Williamson Turn Pattern................................ 30

Following an Orbit Pattern................................................... 30

Setting Up and Following the Cloverleaf Pattern................. 30

Setting Up and Following a Search Pattern......................... 30

Cancelling a Steering Pattern.............................................. 30

Digital Selective Calling............................................... 30

Networked Chartplotter and VHF Radio Functionality.............. 30

Turning On DSC....................................................................... 30

DSC List....................................................................................30

Viewing the DSC List........................................................... 30

Adding a DSC Contact......................................................... 30

Incoming Distress Calls............................................................ 30

Navigating to a Vessel in Distress....................................... 30

Man-Overboard Distress Calls Initiated from a VHF

Radio....................................................................................31

Man-Overboard and SOS Distress Calls Initiated from the

Chartplotter.......................................................................... 31

Position Tracking...................................................................... 31

Viewing a Position Report.................................................... 31

Navigating to a Tracked Vessel........................................... 31

Creating a Waypoint at the Position of a Tracked Vessel.... 31

Editing Information in a Position Report.............................. 31

Deleting a Position-Report Call............................................ 31

Viewing Vessel Trails on the Chart...................................... 31

Individual Routine Calls............................................................ 31

Selecting a DSC Channel.................................................... 31

Making an Individual Routine Call....................................... 31

Making an Individual Routine Call to an AIS Target............ 31

Gauges and Graphs..................................................... 31

Viewing the Gauges..................................................................32

Changing the Data Shown in a Gauge................................ 32

Customizing the Gauges......................................................32

Customizing Engine Gauge and Fuel Gauge Limits............ 32

Viewing Engine and Fuel Gauges............................................ 32

Selecting the Number of Engines Shown in Gauges........... 32

Customizing the Engines Shown in Gauges........................ 32

Enabling Status Alarms for Engine Gauges........................ 32

Enabling Some Engine Gauge Status Alarms..................... 32

Setting the Fuel Alarm.............................................................. 32

Setting the Fuel Capacity of the Vessel............................... 32

Synchronizing the Fuel Data with the Actual Vessel Fuel... 32

Viewing the Wind Gauges........................................................ 32

Configuring the Sailing Wind Gauge.................................... 32

Configuring the Speed Source............................................. 33

Configuring the Heading Source of the Wind Gauge........... 33

Customizing the Close-Hauled Wind Gauge....................... 33

Viewing Trip Gauges................................................................ 33

Resetting Trip Gauges......................................................... 33

Viewing Graphs........................................................................ 33

Setting the Graph Range and Time Scales......................... 33

Battery Management................................................................ 33

Setting Up the Battery Management Page.......................... 33

Tide, Current, and Celestial Information.................... 33

Tide Station Information............................................................33

Current Station Information.......................................................33

Celestial Information................................................................. 33

Viewing Tide Station, Current Station, or Celestial Information

for a Different Date................................................................... 34

Viewing Information for a Different Tide or Current Station...... 34

Viewing Almanac Information from the Navigation Chart......... 34

Warning Manager......................................................... 34

Viewing Messages.................................................................... 34

Sorting and Filtering Messages................................................ 34

Saving Messages to a Memory Card........................................34

Clearing all of the Messages.................................................... 34

Media Player................................................................. 34

Opening the Media Player........................................................ 34

Icons.................................................................................... 34

Selecting the Media Source...................................................... 34

Playing Music............................................................................34

Browsing for Music...............................................................34

Enabling Alphabetical Search......................................... 34

Setting a Song to Repeat..................................................... 34

Setting All Songs to Repeat................................................. 34

Setting Songs to Shuffle...................................................... 34

Adjusting the Volume................................................................ 34

Enabling and Disabling Zones............................................. 34

Muting the Media Volume.................................................... 34

VHF Radio................................................................................ 35

Scanning VHF Channels......................................................35

Adjusting the VHF Squelch.................................................. 35

Radio........................................................................................ 35

Setting the Tuner Region..................................................... 35

Changing the Radio Station................................................. 35

Changing the Tuning Mode................................................. 35

Presets................................................................................. 35

Saving a Station as a Preset........................................... 35

Selecting a Preset........................................................... 35

Removing a Preset..........................................................35

DAB Playback........................................................................... 35

Setting the DAB Tuner Region............................................ 35

Scanning for DAB Stations.................................................. 35

Changing DAB Stations....................................................... 35

Selecting a DAB Station from a List................................ 35

Selecting a DAB Station from a Category....................... 35

DAB Presets........................................................................ 35

Saving a DAB Station as a Preset.................................. 35

Selecting a DAB Preset from a List................................. 35

Removing DAB Presets.................................................. 35

SiriusXM Satellite Radio........................................................... 36

Locating a SiriusXM Radio ID.............................................. 36

Activating a SiriusXM Subscription...................................... 36

Customizing the Channel Guide.......................................... 36

Saving a SiriusXM Channel to the Presets List................... 36

Table of Contents iii

Unlocking SiriusXM Parental Controls................................. 36

Setting Parental Controls on SiriusXM Radio

Channels......................................................................... 36

Changing a Parental Passcode on a SiriusXM Radio..... 36

Restoring Default Parental Control Settings Values....... 36

Clearing All Locked Channels on a SiriusXM Radio....... 36

Setting the Device Name.......................................................... 36

Updating the Media Player Software........................................ 36

SiriusXM Weather......................................................... 36

SiriusXM Equipment and Subscription Requirements.............. 37

Weather Data Broadcasts.........................................................37

Changing the Weather Chart.................................................... 37

Viewing Precipitation Information............................................. 37

Precipitation Views...............................................................37

Storm Cell and Lightning Information....................................... 37

Hurricane Information............................................................... 37

Weather Warnings and Weather Bulletins................................ 37

Forecast Information................................................................. 37

Viewing Forecast Information for Another Time Period....... 37

Weather Fronts and Pressure Centers................................ 37

Viewing a Marine Forecast or an Offshore Forecast........... 38

City Forecasts...................................................................... 38

Viewing Sea Conditions............................................................ 38

Surface Winds......................................................................38

Wave Height, Wave Period, and Wave Direction................ 38

Viewing Forecast Sea Conditions Information for Another

Time Period..........................................................................38

Viewing Fishing Information......................................................38

Surface Pressure and Water Temperature Data................. 38

Forecasting Fish Locations.................................................. 38

Changing the Sea Surface Temperature Color Range........ 38

Visibility Information.................................................................. 38

Viewing Forecast Visibility Information for Another Time

Period...................................................................................39

Viewing Buoy Reports.............................................................. 39

Viewing Local Weather Information near a Buoy................. 39

Creating a Waypoint on a Weather Chart................................. 39

Weather Overlay....................................................................... 39

Turning On the Weather Overlay on a Chart....................... 39

Weather Overlay Settings on the Navigation Chart............. 39

Weather Overlay Settings on the Fishing Chart.................. 39

Viewing Weather Subscription Information............................... 39

Viewing Video............................................................... 39

Selecting a Video Source......................................................... 39

Alternating Among Multiple Video Sources......................... 39

Networked Video Devices.........................................................39

Using Video Presets on Networked Video Cameras........... 39

Saving Video Presets on a Networked Video Camera... 40

Naming Video Presets on a Networked Video

Camera........................................................................... 40

Activating Video Presets on a Networked Video

Camera........................................................................... 40

Camera Settings.................................................................. 40

Video Settings...................................................................... 40

Associating the Camera to a Video Source......................... 40

Video Camera Movement Control........................................40

Controlling Video Cameras Using On-Screen

Controls........................................................................... 40

Controlling a Video Camera Using Gestures.................. 40

Creating a Combination with Video Functions.......................... 40

Configuring the Video Appearance........................................... 40

Configuring the PC Display.......................................................41

Exiting PC Display Mode..................................................... 41

Controlling the VIRB® Action Camera with the Chartplotter.... 41

VIRB Action Camera Settings.............................................. 41

VIRB Action Camera Video Setup Settings......................... 41

Adding the VIRB Action Camera Controls to Other

Screens................................................................................ 41

Controlling the VIRB Action Camera Video Playback.......... 41

Deleting a VIRB Video.................................................... 41

Starting a VIRB Video Slideshow........................................ 41

Device Configuration................................................... 42

Turning On the Chartplotter Automatically............................... 42

System Settings........................................................................ 42

Sounds and Display Settings............................................... 42

GPS Settings....................................................................... 42

Station Settings.................................................................... 42

Viewing System Software Information................................. 42

Viewing the Event Log.................................................... 42

Preferences Settings................................................................ 42

Units Settings....................................................................... 42

Navigation Settings.............................................................. 42

Auto Guidance Path Configurations................................ 43

Adjusting the Distance from Shore..................................43

Communications Settings......................................................... 43

NMEA 0183 Settings............................................................43

Configuring NMEA 0183 Output Sentences................... 43

Setting the Communication Format for Each NMEA 0183

Port..................................................................................44

NMEA 2000 Settings............................................................44

Naming Devices and Sensors on the Network............... 44

Marine Network.................................................................... 44

Setting Alarms.......................................................................... 44

Navigation Alarms................................................................ 44

Setting the Anchor Drag Alarm....................................... 44

System Alarms..................................................................... 44

Sonar Alarm Settings........................................................... 44

Setting Weather Alarms....................................................... 44

Setting the Fuel Alarm......................................................... 44

My Vessel Settings................................................................... 44

Setting the Keel Offset......................................................... 45

Setting the Water Temperature Offset................................. 45

Calibrating a Water Speed Device....................................... 45

Other Vessels Settings............................................................. 45

Settings that are Synced on the Garmin Marine Network........ 45

Restoring the Original Chartplotter Factory Settings................ 46

Communication with Wireless Devices...................... 46

Wi‑Fi® Network........................................................................ 46

Setting Up the Wi‑Fi Wireless Network................................ 46

Connecting a Wireless Device to the Chartplotter............... 46

Changing the Wireless Channel.......................................... 46

Changing the Wi‑Fi Host...................................................... 46

Using the Garmin Helm Application with the Chartplotter........ 46

Chartplotter Data Management................................... 46

Copying Waypoints, Routes, and Tracks from HomePort to a

Chartplotter............................................................................... 46

Selecting a File Type for Third-Party Waypoints and Routes... 46

Copying Data from a Memory Card.......................................... 46

Copying Waypoints, Routes, and Tracks to a Memory Card.... 47

Copying Built-In Maps to a Memory Card................................. 47

Backing Up Data to a Computer............................................... 47

Restoring Backup Data to a Chartplotter.................................. 47

Saving System Information to a Memory Card......................... 47

Appendix....................................................................... 47

Registering Your Device........................................................... 47

Digital Switching....................................................................... 47

Pairing the GRID Remote Input Device with the Chartplotter... 47

Pairing the GRID Device with the Chartplotter from the

Chartplotter.......................................................................... 47

Pairing the GRID Device with the Chartplotter from the GRID

Device.................................................................................. 47

iv Table of Contents

Rotating the GRID Joystick.................................................. 47

Cleaning the Screen................................................................. 47

Viewing Images on a Memory card.......................................... 47

Screenshots.............................................................................. 48

Capturing Screenshots........................................................ 48

Copying Screenshots to a Computer................................... 48

Troubleshooting........................................................................ 48

My device will not acquire GPS signals............................... 48

My device will not turn on or keeps turning off..................... 48

My device is not creating waypoints in the correct

location.................................................................................48

Contacting Garmin Support...................................................... 48

NMEA 2000 PGN Information...................................................48

NMEA 0183 Information........................................................... 49

Software License Agreement................................................... 49

Index.............................................................................. 50

Table of Contents v

Introduction

WARNING

See the Important Safety and Product Information guide in the

product box for product warnings and other important

information.

The Garmin® website at www.garmin.com presents up-to-date

information about your product. The support pages will provide

answers to frequently asked support questions, and you can

download software and chart updates. There is also contact

information to Garmin support should you have any questions.

Device Overview

The location of items may vary based upon the model.

ÀTouchscreen

ÁPower key

ÂAutomatic backlight sensor

Using the Touchscreen

• Tap the screen to select an item.

• Drag or swipe your finger across the screen to pan or scroll.

• Pinch two fingers together to zoom out.

• Spread two fingers apart to zoom in.

On-Screen Buttons

These on-screen buttons may be displayed on some screens

and functions. Some buttons are accessible only in a

combination page or SmartMode™ layout.

Button Function

Clears the on-screen icons and re-centers the screen on the

boat

Opens a full screen view of the item

Creates a new waypoint

Creates a route, with turns, to the destination

Adds a turn to the route at the selected location

Removes the last turn added from the route

Creates a direct route, without turns, to the destination

Creates an Auto Guidance route to the destination

Begins navigation

Ends navigation

Acquires a radar target and begins tracking it

Opens the menu for the page or function

Opens the presets menu for the page or function

Tips and Shortcuts

• Press to turn the chartplotter on.

• Select Home from any screen to return to the Home screen.

• Select Menu to access additional settings about that screen.

• Select Menu to close the menu when finished.

• Press to open additional options, such as adjusting the

backlight and locking the touchscreen.

• Press and select Power Off to turn the chartplotter off.

Locking the Touchscreen

You can lock the touchscreen to prevent inadvertent screen

touches.

1Select .

2Select Lock Touchscreen.

Accessing Owner's Manuals on the

Chartplotter

1Select Info > Owner's Manual.

2Select a manual.

3Select Open.

Downloading the Manuals

You can get the latest owner's manual and translations of

manuals from the web.

1Go to www.garmin.com/manuals/GPSMAP8000.

TIP: To quickly open this web page, scan this code:

2Download the manual.

Getting More Information

If you have any questions about your device, you can contact

Garmin Support.

The website, support.garmin.com, offers many different

troubleshooting tips to help resolve most issues and answer

most questions.

• Frequently asked questions (FAQs)

• Software updates

• Owner's and installation manuals

• Service alerts

• Video

• Contact information

Inserting a Memory Card

You can use optional memory cards with the chartplotter. Map

cards allow you to view high-resolution satellite imagery and

aerial reference photos of ports, harbors, marinas, and other

points of interest. You can use blank memory cards to transfer

data such as waypoints, routes, and tracks to another

compatible chartplotter or a computer.

1Open the door À on the memory card reader.

2Insert the memory card Á with the label facing away from the

door.

Introduction 1

3Press the card in until it clicks.

4Close the card reader door.

Software Update

You may need to update the device software when you install

the device or add an accessory to the device.

The software update requires either a Garmin memory card

reader accessory or another Garmin chartplotter connected over

the Garmin Marine Network.

This device supports up to a 32 GB memory card, formatted to

FAT32.

Loading the New Software on a Memory Card

1Insert a memory card into the card slot on the computer.

2Go to www.garmin.com/support/software/marine.html.

3Select Download next to GPSMAP Series with SD Card.

4Read and agree to the terms.

5Select Download.

6Select Run.

7Select the drive associated with the memory card, and select

Next > Finish.

Updating the Device Software

Before you can update the software, you must obtain a

software-update memory card or load the latest software onto a

memory card.

1Turn on the chartplotter.

2After the home screen appears, insert the memory card into

the card slot.

NOTE: In order for the software update instructions to

appear, the device must be fully booted before the card is

inserted.

3Follow the on-screen instructions.

4Wait several minutes while the software update process

completes.

5When prompted, leave the memory card in place and restart

the chartplotter manually.

6Remove the memory card.

NOTE: If the memory card is removed before the device

restarts fully, the software update is not complete.

GPS Satellite Signals

When you turn on the chartplotter, the GPS receiver must collect

satellite data and establish the current location. When the

chartplotter acquires satellite signals, appears at the top of

the Home screen. When the chartplotter loses satellite signals,

disappears and a flashing question mark appears over on

the chart.

For more information about GPS, go to www.garmin.com

/aboutGPS.

Selecting the GPS Source

You can select your preferred source for GPS data, if you have

more than one GPS source.

1Select Settings > System > GPS > Source.

2Select the source for GPS data.

Customizing the Chartplotter

Home Screen

The chartplotter home screen provides access to all of the

features in the chartplotter. The features are dependant on the

accessories you have connected to the chartplotter. You may

not have all of the options and features discussed in this

manual.

The categories along the right of the screen provide quick

access to the main features of your chartplotter. For example,

the Sonar category displays the views and pages related to the

sonar feature. You can save items you commonly access to the

Favorites category.

All of the options along the bottom of the home screen are

visible on all other screens, except for the Settings button. The

Settings button is accessible only from the home screen.

When viewing another screen, you can return to the home

screen by selecting Home.

When multiple displays are installed on the Garmin Marine

Network, you can group them together into a station. A station

enables the displays to work together, instead of as several

separate displays. When you select Home on one display, each

display in the station returns to the home screen. You can

customize the layout of the pages on each display, making each

page different on each display. When you change the layout of a

page in one display, the changes appear on only that display.

When you change the name and symbol of the layout, those

changes appear on all displays in the station, to maintain a

consistent appearance.

The SmartMode items are geared toward an activity, such as

cruising or docking. When a SmartMode button is selected from

the home screen, each display in the station can show unique

information. For example, when Cruising is selected from the

home screen, one display can show the navigation chart and

another display can show the radar screen.

Adding an Item to Favorites

1From the home screen, select a category from the right.

2Hold a button on the left.

The item is added to the Favorites home screen category.

Customizing Pages

Customizing the Layout of a SmartMode or

Combination Page

You can customize the layout and data shown in the

combination pages and SmartMode layouts. When you change

the layout of a page in a display you are interacting with, the

change appears only on that display, except for the SmartMode

name and symbol. When you change the SmartMode name or

symbol for the layout, the new name or symbol appears on all

displays in the station.

1Open a page to customize.

2Select Menu.

3Select Edit Layout or Edit Combo.

4Select an option:

• To change the name, select Name or Name & Symbol >

Name, enter a new name, and select Done.

• To change the SmartMode symbol, select Name &

Symbol > Symbol, and select a new symbol.

• To change the number of functions shown and the layout

of the screen, select Layout, and select an option.

• To change the function of a portion of the screen, select

the area to change, and select a function from the list on

the right.

• To change how the screens are split, drag the arrows to a

new location.

• To change the data shown on the page and additional

data bars, select Overlays, and select an option.

• To assign a preset to a portion of the SmartMode screen,

select Presets > Include, and select a preset from the list

on the right.

2 Customizing the Chartplotter

Adding a SmartMode Layout

You can add SmartMode layouts to suit your needs. Each

customization made to one SmartMode layout for the home

screen in a station appears on all displays in the station.

1From the home screen, select SmartMode™ > Menu > Add

Layout.

2Select an option:

• To change the name, select Name & SymbolName, enter

a new name, and select Done.

• To change the SmartMode symbol, select Name &

Symbol > Symbol, and select a new symbol.

• To change the number of functions shown and the layout

of the screen, select Layout, and select an option.

• To change the function of a portion of the screen, select

the area to change, and select a function from the list on

the right.

• To change how the screens are split, drag the arrows to a

new location.

• To change the data shown on the page and additional

data bars, select Overlays, and select an option.

• To assign a preset to a portion of the SmartMode screen,

select Presets > Include, and select a preset from the list

on the right.

Adding a Custom Combination Screen

You can create a custom combination screen to suit your needs.

1Select Combos > Menu > Add Combo.

2Follow the on-screen instructions.

Customizing the Data Overlays

You can customize the data shown on a screen.

1Select an option based on the type of screen you are

viewing:

• From a full screen view, select Menu > Edit Overlays.

• From a combination screen, select Menu > Edit Combo >

Overlays.

• From a SmartMode screen, select Menu > Edit Layout >

Overlays.

TIP: To quickly change the data shown in an overlay box,

hold the overlay box.

2Select an item to customize the data and data bar:

• To change the data shown in an overlay box, select the

overlay box, select the new data to show, and select

Back.

• To select the location and layout of the data overlay bar,

select Data, and select an option.

• To customize the information shown when navigating,

select Navigation, and select an option.

• To turn on other data bars, like the media controls, select

Top Bar or Bottom Bar, and select the necessary

options.

3Select Done.

Resetting the Station Layouts

You can restore the factory default layouts for all stations.

Select Settings > System > Station Information > Reset

Stations.

Presets

A preset is a collection of settings that optimize the screen or

view. You can use particular presets to optimize groups of

settings for your activity. For example, some settings might be

optimal for when you are fishing, and others might be optimal for

when you are cruising. Presets are available on some screens,

such as charts, sonar views, and radar views.

To select a preset for a compatible screen, select Menu > ,

and select the preset.

When you are using a preset and you make changes to the

settings or view, you can save the changes to the preset or

create a new preset based on the new customizations.

Saving a New Preset

After you have customized the settings and view of a screen,

you can save the customization as a new preset.

1From a compatible screen, change the settings and view.

2Select Menu > > Save > New.

3Enter a name, and select Done.

Managing Presets

You can customize the pre-loaded presets and edit presets you

created.

1From a compatible screen, select Menu > > Manage.

2Select a preset.

3Select an option:

• To rename the preset, select Rename, enter a name, and

select Done.

• To edit the preset, select Edit, and update the preset.

• To delete the preset, select Delete.

• To reset all presets to factory settings, select Reset All.

Setting the Vessel Type

You can select your boat type to configure the chartplotter

settings and to use features customized for your boat type.

1Select Settings > My Vessel > Vessel Type.

2Select an option.

Adjusting the Backlight

1Select Settings > System > Sounds and Display >

Backlight.

TIP: Select > Backlight from any screen to open the

backlight settings.

2Select an option:

• Adjust the backlight level.

• Select Auto.

Adjusting the Color Mode

1Select Settings > System > Sounds and Display > Color

Mode.

TIP: Select > Color Mode from any screen to access the

color settings.

2Select an option.

Charts and 3D Chart Views

The charts and 3D chart views that are available depend on the

map data and accessories used.

You can access the charts and 3D chart views by selecting

Charts.

Navigation Chart: Shows navigation data available on your pre-

loaded maps and from supplemental maps, if available. The

data includes buoys, lights, cables, depth soundings,

marinas, and tide stations in an overhead view.

Perspective 3D: Provides a view from above and behind the

boat (according to your course) and provides a visual

navigation aid. This view is helpful when navigating tricky

shoals, reefs, bridges, or channels, and is beneficial when

trying to identify entry and exit routes in unfamiliar harbors or

anchorages.

Charts and 3D Chart Views 3

Mariner’s Eye 3D: Shows a detailed, three-dimensional view

from above and behind the boat (according to your course)

and provides a visual navigation aid. This view is helpful

when navigating tricky shoals, reefs, bridges, or channels,

and when trying to identify entry and exit routes in unfamiliar

harbors or anchorages.

NOTE: Mariner's Eye 3D and Fish Eye 3D chart views are

available with premium charts, in some areas.

Fish Eye 3D: Provides an underwater view that visually

represents the sea floor according to the chart information.

When a sonar transducer is connected, suspended targets

(such as fish) are indicated by red, green, and yellow

spheres. Red indicates the largest targets and green

indicates the smallest.

Fishing Chart: Provides a detailed view of the bottom contours

and depth soundings on the chart. This chart removes

navigational data from the chart, provides detailed

bathymetric data, and enhances bottom contours for depth

recognition. This chart is best for offshore deep-sea fishing.

NOTE: The offshore Fishing chart is available with premium

charts, in some areas.

Radar Overlay: Superimposes radar information on the

Navigation chart or the Fishing chart, when the chartplotter is

connected to a radar. This feature is not available with all

models.

Navigation Chart and Offshore Fishing Chart

NOTE: The offshore Fishing chart is available with premium

charts, in some areas.

The Navigation and Fishing charts allow you to plan your

course, view map information, and follow a route. The Fishing

chart is for offshore fishing.

To open the Navigation chart, select Charts > Nav. Chart.

To open the Fishing chart, select Charts > Fishing Chart.

Zooming In and Out Using the Touchscreen

You can quickly zoom in and out of many screens, such as the

charts and sonar views.

• Pinch two fingers together to zoom out.

• Spread two fingers apart to zoom in.

Selecting a Map

If your product has both BlueChart® g2 and Garmin LakeVü™ HD

built-in maps, you can select which map to use. Not all models

have both types of built-in maps.

1From the Navigation chart, select Menu > Built-In Map.

2Select an option:

• When you are on an inland lake, select LakeVü™ HD.

• When you are offshore, select BlueChart® g2.

Measuring a Distance on the Chart

1From a chart or the Radar overlay, select a location.

2Select Measure Distance.

A push pin appears on the screen at your present location.

The distance and angle from the pin is listed in the upper-left

corner.

TIP: To reset the pin and measure from the current location of

the cursor, select Set Reference.

Chart Symbols

This table contains some of the common symbols you might see

on the detailed charts.

Icon Description

Buoy

Information

Marine services

Tide station

Current station

Overhead photo available

Perspective photo available

Other features common to most charts include depth contour

lines, intertidal zones, spot soundings (as depicted on the

original paper chart), navigational aids and symbols,

obstructions, and cable areas.

Creating a Waypoint on the Chart

1From a chart or a 3D chart view, select a location or object.

2Select Create Waypoint or .

Viewing Location and Object Information on a Chart

You can view information about a location or an object on the

Navigation chart or the Fishing chart.

NOTE: The offshore Fishing chart is available with premium

charts, in some areas.

1From the Navigation chart or Fishing chart, select a location

or object.

A list of options appears along the right side of the chart. The

options that appear vary based on the location or object you

selected.

2Select an option:

• To navigate to the selected location, select Navigate To.

• To mark a waypoint at the cursor location, select Create

Waypoint.

• To view the distance and bearing of the object from your

current location, select Measure Distance.

The distance and bearing appear on the screen. Select

Select to measure from a location other than your current

location.

• To view tide, current, celestial, chart notes, or local

services information near the cursor, select Information.

Viewing Details about Navaids

From the Navigation chart, Fishing chart, Perspective 3D chart

view, or Mariner’s Eye 3D chart view, you can view details about

various types of navigation aids, including beacons, lights, and

obstructions.

NOTE: The offshore Fishing chart is available with premium

charts, in some areas.

NOTE: Mariner's Eye 3D and Fish Eye 3D chart views are

available with premium charts, in some areas.

1From a chart or 3D chart view, select a navaid.

2Select the name of the navaid.

Navigating to a Point on the Chart

CAUTION

The Auto Guidance feature is based on electronic chart

information. That data does not ensure obstacle and bottom

clearance. Carefully compare the course to all visual sightings,

and avoid any land, shallow water, or other obstacles that may

be in your path.

4 Charts and 3D Chart Views

When using Go To, a direct course and a corrected course may

pass over land or shallow water. Use visual sightings, and steer

to avoid land, shallow water, and other dangerous objects.

NOTE: The offshore Fishing chart is available with premium

charts, in some areas.

NOTE: Auto Guidance is available with premium charts, in some

areas.

1From the Navigation chart or Fishing chart, select a location.

2If necessary, select Navigate To.

3Select an option:

• To navigate directly to the location, select Go To or .

• To create a route to the location, including turns, select

Route To or .

• To use Auto Guidance, select Auto Guidance or .

4Review the course indicated by the magenta line.

NOTE: When using Auto Guidance, a gray segment within

any part of the magenta line indicates that Auto Guidance

cannot calculate part of the Auto Guidance line. This is due to

the settings for minimum safe water depth and minimum safe

obstacle height.

5Follow the magenta line, steering to avoid land, shallow

water, and other obstacles.

Heading Line and Angle Markers

The heading line is an extension drawn on the map from the

bow of the boat in the direction of travel. Angle markers indicate

relative position from the heading or course over ground, which

are helpful for casting or finding reference points.

Setting the Heading and Course Over Ground Lines

You can show the heading line and the course over ground

(COG) line on the chart.

COG is your direction of movement. Heading is the direction the

bow of the boat is pointed, when a heading sensor is connected.

1From a chart view, select Menu > Chart Setup > Chart

Appearance > Heading Line.

2If necessary, select Source, and select an option:

• To automatically use the source available, select Auto.

• To use the GPS antenna heading for COG, select GPS

Heading (COG).

• To use data from a connected heading sensor, select

North Reference.

• To use data from both a connected heading sensor and

the GPS antenna, select COG and Heading.

This displays both the heading line and the COG line on

the chart.

3Select Display, and select an option:

• Select Distance > Distance, and enter the length of the

line shown on the chart.

• Select Time > Time, and enter the time used to calculate

the distance your boat will travel in the specified time at

your present speed.

Turning on Angle Markers

You can add angle markers to the map along the heading line.

Angle markers can be helpful for casting when fishing.

1Set the heading line (Setting the Heading and Course Over

Ground Lines, page 5).

2Select Angle Markers.

Premium Charts

CAUTION

The Auto Guidance feature is based on electronic chart

information. That data does not ensure obstacle and bottom

clearance. Carefully compare the course to all visual sightings,

and avoid any land, shallow water, or other obstacles that may

be in your path.

NOTE: Not all models support all charts.

Optional premium charts, such as BlueChart g2 Vision®, allow

you to get the most out of your chartplotter. In addition to

detailed marine charting, premium charts may contain these

features, which are available in some areas.

Mariner’s Eye 3D: Provides a view from above and behind the

boat for a three-dimensional navigation aid.

Fish Eye 3D: Provides an underwater, three-dimensional view

that visually represents the sea floor according to the

information on the chart.

Fishing Charts: Shows the chart with enhanced bottom

contours and without navigational data. This chart works well

for offshore deep-sea fishing.

High Resolution Satellite Imagery: Provides high-resolution

satellite images for a realistic view of the land and water on

the Navigation chartShowing Satellite Imagery on the

Navigation Chart, page 6.

Aerial Photos: Shows marinas and other navigationally

significant aerial photos to help you visualize your

surroundingsViewing Aerial Photos of Landmarks, page 6.

Detailed Roads and POI data: Shows detailed road and point

of interest (POI) data, which includes highly detailed coastal

roads and POIs such as restaurants, lodging, and local

attractions.

Auto Guidance: Uses specified information about your vessel

and chart data to determine the best path to your destination.

Viewing Tide Station Information

on the chart indicates a tide station. You can view a detailed

graph for a tide station to help predict the tide level at different

times or on different days.

NOTE: This feature is available with premium charts, in some

areas.

1From the Navigation chart or Fishing chart, select a tide

station.

Tide direction and tide level information appear near .

2Select the station name.

Animated Tide and Current Indicators

NOTE: This feature is available with premium charts, in some

areas.

You can view indicators for animated tide station and current

direction on the Navigation chart or the Fishing chart. You must

also enable animated icons in the chart settings (Showing Tides

and Current Indicators, page 6).

An indicator for a tide station appears on the chart as a vertical

bar graph with an arrow. A red arrow pointing downward

indicates a falling tide, and a blue arrow pointing upward

indicates a rising tide. When you move the cursor over the tide

station indicator, the height of the tide at the station appears

above the station indicator.

Current direction indicators appear as arrows on the chart. The

direction of each arrow indicates the direction of the current at a

specific location on the chart. The color of the current arrow

indicates the range of speed for the current at that location.

When you move the cursor over the current direction indicator,

the specific current speed at the location appears above the

direction indicator.

Color Current Speed Range

Yellow 0 to 1 knot

Orange 1 to 2 knots

Red 2 or more knots

Charts and 3D Chart Views 5

Showing Tides and Current Indicators

NOTE: This feature is available with premium charts, in some

areas.

You can show static or animated tide and current station

indicators on the Navigation chart or Fishing chart.

1From the Navigation or Fishing chart, select Menu > Chart

Setup > Tides & Currents.

2Select an option:

• To show current station indicators and tide station

indicators on the chart, select On.

• To show animated tide station indicators and animated

current direction indicators on the chart, select Animated.

Showing Satellite Imagery on the Navigation Chart

NOTE: This feature is available with premium charts, in some

areas.

You can overlay high-resolution satellite images on the land or

on both land and sea portions of the Navigation chart.

NOTE: When enabled, high-resolution satellite images are

present only at lower zoom levels. If you cannot see high-

resolution images in your optional chart region, you can select

to zoom in. You also can set the detail level higher by changing

the map zoom detail.

1From the Navigation chart, select Menu > Chart Setup >

Satellite Photos.

2Select an option:

• Select Land Only to show standard chart information on

the water, with photos overlaying the land.

• Select Photo Map to show photos on both the water and

the land at a specified opacity. Use the slider bar to adjust

the photo opacity. The higher you set the percentage, the

more the satellite photos cover both land and water.

Viewing Aerial Photos of Landmarks

Before you can view aerial photos on the Navigation chart, you

must turn on the Satellite Photos setting in the chart setup.

NOTE: This feature is available with premium charts, in some

areas.

You can use aerial photographs of landmarks, marinas, and

harbors to help orient yourself to your surroundings or to

acquaint yourself with a marina or a harbor prior to arrival.

1From the Navigation chart, select a camera icon:

• To view an overhead photo, select .

• To view a perspective photo, select . The photo was

taken from the location of the camera, pointed in the

direction of the cone.

2Select Aerial Photo.

Automatic Identification System

The Automatic Identification System (AIS) enables you to

identify and track other vessels, and alerts you to area traffic.

When connected to an external AIS device, the chartplotter can

show some AIS information about other vessels that are within

range, that are equipped with a transponder, and that are

actively transmitting AIS information.

The information reported for each vessel includes the Maritime

Mobile Service Identity (MMSI), location, GPS speed, GPS

heading, time that has elapsed since the last position of the

vessel was reported, nearest approach, and time to the nearest

approach.

Some chartplotter models also support Blue Force Tracking.

Vessels being tracked with Blue Force Tracking are indicated on

the chartplotter with a blue-green color.

AIS Targeting Symbols

Symbol Description

AIS vessel. The vessel is reporting AIS information. The

direction in which the triangle is pointing indicates the

direction in which the AIS vessel is moving.

Target is selected.

Target is activated. The target appears larger on the chart. A

green line attached to the target indicates the heading of the

target. The MMSI, speed, and direction of the vessel appear

beneath the target, if the details setting has been set to Show.

If the AIS transmission from the vessel is lost, a message

banner appears.

Target is lost. A green X indicates that the AIS transmission

from the vessel is lost, and the chartplotter displays a

message banner asking whether the vessel should continue

to be tracked. If you discontinue vessel tracking, the lost

target symbol disappears from the chart or the 3D chart view.

Dangerous target in range. The target flashes while an alarm

sounds and a message banner appears. After the alarm has

been acknowledged, a solid red triangle with a red line

attached to it indicates the location and the heading of the

target. If the safe-zone collision alarm has been set to Off, the

target flashes, but the audible alarm does not sound and the

alarm banner does not appear. If the AIS transmission from

the vessel is lost, a message banner appears.

Dangerous target is lost. A red X indicates that the AIS

transmission from the vessel is lost, and the chartplotter

displays a message banner asking whether the vessel should

continue to be tracked. If you discontinue vessel tracking, the

lost dangerous target symbol disappears from the chart or the

3D chart view.

The location of this symbol indicates the closest point of

approach to a dangerous target, and the numbers near the

symbol indicate the time to the closest point of approach to

that target.

NOTE: Vessels being tracked with the Blue Force Tracking

feature are indicated with a blue-green color regardless of their

status.

Heading and Projected Course of Activated AIS

Targets

When heading and course over ground information are provided

by an activated AIS target, the heading of the target appears on

a chart as a solid line attached to the AIS target symbol. A

heading line does not appear on a 3D chart view.

The projected course of an activated AIS target appears as a

dashed line on a chart or a 3D chart view. The length of the

projected course line is based on the value of the projected

heading setting. If an activated AIS target is not transmitting

speed information, or if the vessel is not moving, a projected

course line does not appear. Changes in the speed, course over

ground, or rate of turn information transmitted by the vessel can

impact the calculation of the projected course line.

When course over ground, heading, and rate of turn information

are provided by an activated AIS target, the projected course of

the target is calculated based on the course over ground and the

rate of turn information. The direction in which the target is

turning, which is also based on the rate of turn information, is

indicated by the direction of the barb at the end of the heading

line. The length of the barb does not change.

When course over ground and heading information are provided

by an activated AIS target, but rate of turn information is not

provided, the projected course of the target is calculated based

on the course over ground information.

6 Charts and 3D Chart Views

Showing AIS and MARPA Vessels on a Chart or on a

3D Chart View

Before you can show AIS vessels on a chart, you must have an

external AIS device and active transponder signals from other

vessels. Mini Automatic Radar Plotting Aid (MARPA)

functionality works with radar.

You can configure how other vessels appear on a chart or on a

3D chart view. The display range and MARPA settings

configured for one chart or one 3D chart view are applied only to

that chart or to that 3D chart view. The details, projected

heading, and trails settings configured for one chart or one 3D

chart view are applied to all charts and to all 3D chart views.

1From a chart or a 3D chart view, select Menu > Other

Vessels > Display Setup.

2Select an option:

• To indicate the distance from your location in which AIS

vessels appear, select Display Range, and select a

distance.

• To show MARPA-tagged vessels, select MARPA > Show.

• To show details about AIS-activated and MARPA-tagged

vessels, select Details > Show.

• To set the projected heading time for AIS-activated and

MARPA-tagged vessels, select Proj. Heading, and enter

the time.

• To show the tracks of AIS vessels, select the length of the

track that appears using a trail, select Trails, and select

the length.

Activating a Target for an AIS Vessel

1From a chart or a 3D chart view, select an AIS vessel.

2Select AIS Vessel > Activate Target.

Viewing Information about a Targeted AIS Vessel

You can view the AIS signal status, MMSI, GPS speed, GPS

heading, and other information that is reported about a targeted

AIS vessel.

1From a chart or a 3D chart view, select an AIS vessel.

2Select AIS Vessel.

Deactivating a Target for an AIS Vessel

1From a chart or a 3D chart view, select an AIS vessel.

2Select AIS Vessel > Deactivate.

Viewing a List of AIS and MARPA Threats

1From a chart or a 3D chart view, select Menu > Other

Vessels > List > Show.

2Select the type of threats to include in the list.

Setting the Safe-Zone Collision Alarm

Before you can set a collision alarm, you must have a

compatible chartplotter connected to an AIS device or radar.

The safe-zone collision alarm is used only with AIS and MARPA.

MARPA functionality works with radar. The safe zone is used for

collision avoidance and can be customized.

1Select Settings > Alarms > Collision Alarm > On.

A message banner appears and an alarm sounds when a

MARPA-tagged object or an AIS-activated vessel enters the

safe-zone area around your boat. The object is also labeled

as dangerous on the screen. When the alarm is off, the

message banner and audible alarm are disabled, but the

object is still labeled as dangerous on the screen.

2Select Range.

3Select a distance for the safe-zone radius around your

vessel.

4Select Time To.

5Select a time at which the alarm will sound if a target is

determined to intersect the safe zone.

For example, to be notified of a pending intersection 10

minutes before it will likely occur, set Time To to 10, and the

alarm will sound 10 minutes before the vessel intersects the

safe zone.

AIS Distress Signals

Self-contained AIS distress signal devices transmit emergency

position reports when activated. The chartplotter can receive

signals from Search and Rescue Transmitters (SART),

Emergency Position Indicating Radio Beacons (EPIRB), and

other man overboard signals. Distress signal transmissions are

different than standard AIS transmissions, so they appear

differently on the chartplotter. Instead of tracking a distress

signal transmission for collision avoidance, you track a distress

signal transmission to locate and assist a vessel or person.

Navigating to a Distress Signal Transmission

When you receive a distress signal transmission, a distress

signal alarm appears.

Select Review > Go To to begin navigation to the

transmission.

AIS Distress Signal Device Targeting Symbols

Symbol Description

AIS distress signal device transmission. Select to see more

information about the transmission and begin navigation.

Transmission lost.

Transmission test. Appears when a vessel initiates a test of

their distress signal device, and does not represent a true

emergency.

Transmission test lost.

Enabling AIS Transmission Test Alerts

To avoid a large number of test alerts and symbols in crowded

areas such as marinas, you can select to receive or ignore AIS

test messages. To test an AIS emergency device, you must

enable the chartplotter to receive test alerts.

1Select Settings > Alarms > AIS.

2Select an option:

• To receive or ignore Emergency Position Indicating Radio

Beacon (EPRIB) test signals, select AIS-EPIRB Test.

• To receive or ignore Man Overboard (MOB) test signals,

select AIS-MOB Test.

• To receive or ignore Search and Rescue Transponder

(SART) test signals, select AIS-SART Test.

Turning Off AIS Reception

AIS signal reception is turned on by default.

Select Settings > Other Vessels > AIS > Off.

All AIS functionality on all charts and 3D chart views is

disabled. This includes AIS vessel targeting and tracking,

collision alarms that result from AIS vessel targeting and

tracking, and the display of information about AIS vessels.

Chart and 3D Chart View Settings

NOTE: Not all settings apply to all charts and 3D chart views.

Some options require premium maps or connected accessories,

such as radar.

These settings apply to the charts and 3D chart views, except

the radar overlay and Fish Eye 3D (Fish Eye 3D Settings,

page 9).

From a chart or a 3D chart view, select Menu.

Waypoints and Tracks: Opens waypoint and tracks

listsWaypoints and Tracks Settings on the Charts and Chart

Views, page 8.

Other Vessels: Adjusts how other vessels are shownOther

Vessels Settings on the Charts and Chart Views, page 8.

Charts and 3D Chart Views 7

Quickdraw Contours: Turns on bottom contour drawing, and

allows you to create fishing map labels.

Weather Radar: Shows weather radar imaging on the

Perspective 3D or Mariner's Eye 3D chart views.

Navaids: Shows navigational aids on the Fishing chart.

Chart Setup: See Navigation and Fishing Chart Setup,

page 8.

Chart Appearance: Adjusts the appearance of the different

charts and 3D chart viewsChart Appearance Settings,

page 8. This might appear in the Chart Setup menu.

Edit Overlays: Adjusts the data shown on the

screenCustomizing the Data Overlays, page 3. This might

appear in the Chart Setup menu.

Navigation and Fishing Chart Setup

NOTE: Not all settings apply to all charts and 3D chart views.

Some settings require external accessories or applicable

premium charts.

From the Navigation chart or Fishing chart, select Menu > Chart

Setup.

Satellite Photos: Shows high-resolution satellite images on the

land or on both land and sea portions of the Navigation chart,

when certain premium maps are usedShowing Satellite

Imagery on the Navigation Chart, page 6.

Water Overlay: Enables relief shading, which shows the

gradient of the bottom with shading, or sonar imagery, which

helps identify the density of the bottom. This feature is

available only with some premium maps.

Tides & Currents: Shows current station indicators and tide

station indicators on the chartShowing Tides and Current

Indicators, page 6 and enables the tides and current slider,

which sets the time for which tides and currents are reported

on the map.

Roses: Shows a compass rose around your boat, indicating

compass direction oriented to the heading of the boat. A true

wind direction or apparent wind direction indicator appears if

the chartplotter is connected to a compatible marine wind

sensor.

Lake Level: Sets the present water level of the lake. This

feature is available only with some premium maps.

Inset Map: Shows a small map centered on your present

location.

Weather: Sets which weather items are shown on the chart,

when the chartplotter is connected to a compatible weather

receiver with an active subscription. Requires a compatible,

connected antenna and an active subscription.

Chart Appearance: Sets the appearance of the different charts

and 3D chart views Chart Appearance Settings, page 8.

Waypoints and Tracks Settings on the Charts and

Chart Views

From a chart or a 3D chart view, select Menu > Waypoints and

Tracks.

Tracks: Shows tracks on the chart or 3D chart view.

Waypoints: Shows the list of waypoints (Viewing a List of all

Waypoints, page 11).

Create Waypoint: Creates a new waypoint.

Waypoint Display: Sets how to display waypoints on the chart.

Active Tracks: Shows the active track options menu.

Saved Tracks: Shows the list of saved tracks (Viewing a List of

Saved Tracks, page 14).

Tracks Display: Sets which tracks to display on the chart based

on track color.

Chart Appearance Settings

You can adjust the appearance of the different charts and 3D

chart views. Each setting is specific to the chart or chart view

being used.

NOTE: Not all settings apply to all charts and 3D chart views

and chartplotter models. Some options require premium maps or

connected accessories.

From a chart or 3D chart view, select Menu > Chart Setup >

Chart Appearance.

Orientation: Sets the perspective of the map.

Detail: Adjusts the amount of detail shown on the map, at

different zoom levels.

Heading Line: Shows and adjusts the heading line, which is a

line drawn on the map from the bow of the boat in the

direction of travel, and sets the data source for the heading

line.

Panoptix Area: Shows and hides the area being scanned by

the Panoptix™ transducer. The attitude and heading reference

system (AHRS) must be calibrated use this feature

(Calibrating the Compass, page 20).

World Map: Uses either a basic world map or a shaded relief

map on the chart. These differences are visible only when

zoomed out too far to see the detailed charts.

Spot Depths: Turns on spot soundings and sets a dangerous

depth. Spot depths that are equal to or more shallow than the

dangerous depth are indicated by red text.

Shallow Shading: Sets the shades from the shoreline to the

specified depth.

Depth Shading: Specifies an upper and lower depth to shade

between.

Symbols: Shows and configures the appearance of various

symbols on the chart, such as the vessel icon, navaid

symbols, land POIs, and light sectors.

Inset Map: Shows a map zoomed in on the vessel's location in

the corner of the main map.

Style: Sets how the chart appears over 3D terrain.

Hazard Colors: Shows shallow water and land with a color

scale. Blue indicates deep water, yellow is shallow water, and

red is very shallow water.

Preferred Depth: Sets the appearance of a safe depth for the

Mariner’s Eye 3D chart view.

NOTE: This setting affects only the appearance of hazard

colors for the Mariner’s Eye 3D chart view. It does not affect

the safe water depth Auto Guidance setting or the sonar

shallow water alarm setting.

Range Rings: Shows and configures the appearance of range

rings, which help you to visualize distances in some chart

views.

Lane Width: Specifies the width of the navigation lane, which is

the magenta line in some chart views that indicates the

course to your destination.

Other Vessels Settings on the Charts and Chart Views

NOTE: These options require connected accessories, such as

an AIS receiver or VHF radio.

From a chart or a 3D chart view, select Menu > Other Vessels.

List: Shows a list of AIS and MARPA vessels.

DSC: Shows the DSC list and sets the DSC trails on the chart.

Collision Alarm: Sets the safe-zone collision alarm (Setting the

Safe-Zone Collision Alarm, page 7).

Display Setup: See Showing AIS and MARPA Vessels on a

Chart or on a 3D Chart View, page 7.

8 Charts and 3D Chart Views

Laylines Settings

To use the laylines features, you must connect a wind sensor to

the chartplotter.

When in sailing mode (Setting the Vessel Type, page 3), you

can display laylines on the navigation chart. Laylines can be

very helpful when racing.

From the navigation chart, select Menu > Sailing > Laylines.

Display: Sets how the laylines and vessel appear on the chart,

and sets the length of the laylines.

Sailing Ang.: Allows you to select how the device calculates

laylines. The Actual option calculates the laylines using the

measured wind angle from the wind sensor. The Manual

option calculates the laylines using manually entered

windward and leeward angles.

Windward Ang.: Allows you to set a layline based on the

windward sailing angle.

Leeward Ang.: Allows you to set a layline based on the leeward

sailing angle.

Tide Correction: Corrects the laylines based on the tide.

Layline Filter: Filters the layline data based on the time interval

entered. For a smoother layline that filters out some of the

changes in the boat's heading or true wind angle, enter a

higher number. For laylines that display a higher sensitivity to

changes in the boat's heading or true wind angle, enter a

lower number.

Fish Eye 3D Settings

NOTE: This feature is available with premium charts, in some

areas.

From the Fish Eye 3D chart view, select Menu.

View: Sets the perspective of the 3D chart view.

Tracks: Shows tracks.

Sonar Cone: Shows a cone that indicates the area covered by

the transducer.

Fish Symbols: Shows suspended targets.

Garmin Quickdraw™ Contours

Mapping

WARNING

The Garmin Quickdraw Contours mapping feature allows users

to generate maps. Garmin makes no representations about the

accuracy, reliability, completeness or timeliness of the maps

generated by third parties. Any use or reliance on the maps

generated by third parties is at your own risk.

The Garmin Quickdraw Contours mapping feature allows you to

instantly create maps with contours and depth labels for any

body of water.

When Garmin Quickdraw Contours records data, a colored

circle surrounds the vessel icon. This circle represents the

approximate area of the map that is scanned by each pass.

A green circle indicates good depth and GPS position, and a

speed under 16 km/h (10 mph). A yellow circle indicates good

depth and GPS position, and a speed between 16 and 32 km/h

(10 and 20 mph). A red circle indicates poor depth or GPS

position, and a speed above 32 km/h (20 mph).

You can view Garmin Quickdraw Contours in a combination

screen or as a single view on the map.

The amount of saved data depends on the size of your memory

card, your sonar source, and the speed of your boat as you

record data. You can record longer when you use a single-beam

sonar. It is estimated that you might be able to record about

1,500 hours of data onto a 2 GB memory card.

When you record data on a memory card in your chartplotter,

the new data is added to your existing Garmin Quickdraw

Contours map, and is saved on the memory card. When you

insert a new memory card, the existing data does not transfer

onto the new card.

Mapping a Body of Water Using the Garmin

Quickdraw Contours Feature

Before you can use the Garmin Quickdraw Contours feature,

you must have a supported chartplotter with upgraded software,

sonar depth, your GPS position, and a memory card with free

space.

NOTE: This feature is not available on all models.

1From a chart view, select Menu > Quickdraw Contours >

Start Recording.

2When recording is complete, select Stop Recording.

3Select Manage > Name, and enter a name for the map.

Adding a Label to a Garmin Quickdraw

Contours Map

You can add labels to a Garmin Quickdraw Contours map to

mark hazards or points of interest.

1From the Navigation chart, select a location.

2Select Add Quickdraw Label.

3Enter text for the label, and select Done.

Garmin Quickdraw Community

The Garmin Quickdraw Community is a free, public, online

community that enables you to share your Garmin Quickdraw

Contours maps with others. You can also download maps other

users have created.

To access the Garmin Quickdraw Community, sign in to your

Garmin Connect™ account, and then you can upload and

download maps using a memory card.

Accessing the Garmin Quickdraw Community

You can access the Garmin Quickdraw Community using

Garmin Connect website.

1Go to connect.garmin.com.

2Select Get Started > Quickdraw Community > Get Started.

3If you do not have a Garmin Connect account, create one.

4Sign in to your Garmin Connect account.

5Select Marine in the upper-right to open the Garmin

Quickdraw widget.

TIP: Make sure you have a memory card in your computer to

share Garmin Quickdraw Contours maps.

Sharing Your Garmin Quickdraw Contours Maps with

the Garmin Quickdraw Community

You can share Garmin Quickdraw Contours maps that you have

created with others in the Garmin Quickdraw Community.

When you share a contour map, only the contour map is shared.

Your waypoints are not shared.

1Remove the memory card from the card reader.

2Insert the memory card into your computer.

Garmin Quickdraw™ Contours Mapping 9

3Access the Garmin Quickdraw Community (Accessing the

Garmin Quickdraw Community, page 9).

4Select Share Your Contours.

5Browse to your memory card, and select the /Garmin folder.

6Open the Quickdraw folder, and select the file named

ContoursLog.svy.

After the file is uploaded, delete the ContoursLog.svy file from

your memory card to avoid issues with future uploads. Your data

will not be lost.

Downloading Garmin Quickdraw Community Maps

You can download Garmin Quickdraw Contours maps that other

users have created and shared with the Garmin Quickdraw

Community.

1Insert the memory card into your computer.

2Access the Garmin Quickdraw Community (Accessing the

Garmin Quickdraw Community, page 9).

3Select Search for Contours.

4Use the map and search features to locate an area to

download.

The red dots represent Garmin Quickdraw Contours maps

that have been shared for that region.

5Select Select an Area to Download.

6Drag the edges of the box to select the area to download.

7Select Start Download.

8Save the file to your memory card.

TIP: If you cannot find the file, look in the "Downloads" folder.

The browser may have saved the file there.

9Remove the memory card from your computer.

10Insert the memory card in the card reader.

The chartplotter automatically recognizes the contours maps.

The chartplotter may take a few minutes to load the maps.

Garmin Quickdraw Contours Settings

From a chart, select Menu > Quickdraw Contours > Settings.

Display: Displays Garmin Quickdraw Contours. The User

Contours option shows your own Garmin Quickdraw

Contours maps. The Community Contours option shows the

maps you have downloaded from the Garmin Quickdraw

Community.

Recording Offset: Sets the distance between the sonar depth

and the contour recording depth. If the water level has

changed since your last recording, adjust this setting so the

recording depth is the same for both recordings.

For example, if the last time you recorded had a sonar depth

of 3.1 m (10.5 ft.), and today's sonar depth is 3.6 m (12 ft.),

enter -0.5 m (-1.5 ft.) for the a Recording Offset value.

User Display Offset: Sets differences in contour depths and

depth labels on your own contours maps to compensate for

changes in the water level of a body of water, or for depth

errors in recorded maps.

Comm. Display Offset: Sets differences in contour depths and

depth labels on the community contours maps to compensate

for changes in the water level of a body of water, or for depth

errors in recorded maps.

Survey Coloring: Sets the color of the Garmin Quickdraw

Contours display. When this setting is turned on, the colors

indicate the quality of the recording. When this setting is

turned off, the contour areas use standard map colors.

Green indicates good depth and GPS position, and a speed

under 16 km/h (10 mph). Yellow indicates good depth and

GPS position, and a speed between 16 and 32 km/h (10 and

20 mph). Red indicates poor depth or GPS position, and a

speed above 32 km/h (20 mph).

Depth Shading: Specifies the upper and lower limits of a depth

range and a color for that depth range.

Navigation with a Chartplotter

CAUTION

If your vessel has an autopilot system, a dedicated autopilot

control display must be installed at each steering helm in order

to disable the autopilot system.

The Auto Guidance feature is based on electronic chart

information. That data does not ensure obstacle and bottom

clearance. Carefully compare the course to all visual sightings,

and avoid any land, shallow water, or other obstacles that may

be in your path.

When using Go To, a direct course and a corrected course may

pass over land or shallow water. Use visual sightings, and steer

to avoid land, shallow water, and other dangerous objects.

NOTE: Some chart views are available with premium charts, in

some areas.

To navigate, you must choose a destination, set a course or

create a route, and follow the course or route. You can follow

the course or the route on the Navigation chart, Fishing chart,

Perspective 3D chart view, or Mariner’s Eye 3D chart view.

You can set and follow a course to a destination using one of

three methods: Go To, Route To, or Auto Guidance.

Go To: Takes you directly to the destination. This is the

standard option for navigating to a destination. The

chartplotter creates a straight-line course or navigation line to

the destination. The path may run over land and other

obstacles.

Route To: Creates a route from your location to a destination,

allowing you to add turns along the way. This option provides

a straight-line course to the destination, but allows you to add

turns into the route to avoid land and other obstacles.

Auto Guidance: Uses the specified information about your

vessel and chart data to determine the best path to your

destination. This option is available only when using a

compatible premium chart in a compatible chartplotter. It

provides a turn-by-turn navigation path to the destination,

avoiding land and other obstaclesAuto Guidance, page 13.

When you are using a compatible Garmin autopilot

connected to the chartplotter using NMEA 2000®, the

autopilot follows the Auto Guidance route.

NOTE: Auto Guidance is available with premium charts, in

some areas.

Basic Navigation Questions

Question Answer

How do I make the

chartplotter point me in the

direction in which I want to go

(bearing)?

Navigate using Go To (Setting and

Following a Direct Course Using Go To,

page 12).

How do I make the device

guide me along a straight line

(minimizing cross track) to a

location using the shortest

distance from the present

location?

Build a single-leg route and navigate it

using Route To (Creating and

Navigating a Route From Your Present

Location, page 12).

How do I make the device

guide me to a location while

avoiding charted obstacles?

Build a multi-leg route and navigate it

using Route To (Creating and

Navigating a Route From Your Present

Location, page 12).

How do I make the device

steer my automatic pilot?

Navigate using Route To (Creating and

Navigating a Route From Your Present

Location, page 12).

10 Navigation with a Chartplotter

Question Answer

Can the device create a path

for me?

If you have premium maps that support

Auto Guidance and are in an area

covered by Auto Guidance, navigate

using Auto Guidance (Setting and

Following an Auto Guidance Path,

page 13).

How do I change the Auto

Guidance settings for my

boat?

See Auto Guidance Path

Configurations, page 13.

Destinations

You can select destinations using various charts and 3D chart

views or using the lists.

Searching for a Destination by Name

You can search for saved waypoints, saved routes, saved

tracks, and marine services destinations by name.

1Select Info > Services > Search by Name.

2Enter at least a portion of the name of your destination.

3If necessary, select Done.

The 50 nearest destinations that contain your search criteria

appear.

4Select the destination.

Selecting a Destination Using the Navigation Chart

From the Navigation chart, select a destination.

Searching for a Marine Services Destination

NOTE: This feature is available with premium charts, in some

areas.

The chartplotter contains information for thousands of

destinations offering marine services.

1Select Info > Services.

2Select Offshore Services or Inland Services.

3If necessary, select the marine service category.

The chartplotter shows a list of the nearest locations and the

distance and bearing to each.

4Select a destination.

You can select Next Page or Previous Page to view

additional information or to show the location on a chart.

Stopping Navigation

While navigating, from the Navigation or Fishing chart, select

an option:

• Select Menu > Stop Navigation.

• When navigating with Auto Guidance, select Menu >

Navigation Options > Stop Navigation.

Waypoints

Waypoints are locations you record and store in the device.

Waypoints can mark where you are, where you are going, or

where you have been. You can add details about the location,

such as name, elevation, and depth.

Marking Your Present Location as a Waypoint

From any screen, select Mark.

Creating a Waypoint at a Different Location

1Select Info > User Data > Waypoints > Create Waypoint.

2Select an option:

• To create the waypoint by entering position coordinates,

select Enter Coordinates, and enter the coordinates.

• To create the waypoint using a chart, select Use Chart,

select the location, and select Select.

Marking an SOS Location

You can mark an SOS location. When a Garmin VHF radio is

connected using NMEA 2000, you can select different SOS

types, such as Man Overboard and Piracy.

1Hold SOS for one second.

2Select the SOS type.

3If necessary, select OK to navigate to the man overboard

location.

If you selected OK, the chartplotter sets a direct course back to

the location. If you selected another type of SOS, the call details

are sent to the VHF radio. You must send the call using the

radio.

Viewing a List of all Waypoints

Select Info > User Data > Waypoints.

Editing a Saved Waypoint

1Select Info > User Data > Waypoints.

2Select a waypoint.

3Select Review > Edit.

4Select an option:

• To add a name, select Name, and enter a name.

• To change the symbol, select Symbol.

• To change the depth, select Depth.

• To change the water temperature, select Water Temp..

• To change the comment, select Comment.

Moving a Saved Waypoint

1Select Info > User Data > Waypoints.

2Select a waypoint.

3Select Review > Move.

4Indicate a new location for the waypoint:

• To move the waypoint while using the chart, select Use

Chart, select a new location on the chart, and select

Move Waypoint.

• To move the waypoint using coordinates, select Enter

Coordinates, and enter the new coordinates.

Browsing for and Navigating to a Saved Waypoint

CAUTION

The Auto Guidance feature is based on electronic chart

information. That data does not ensure obstacle and bottom

clearance. Carefully compare the course to all visual sightings,

and avoid any land, shallow water, or other obstacles that may

be in your path.

When using Go To, a direct course and a corrected course may

pass over land or shallow water. Use visual sightings, and steer

to avoid land, shallow water, and other dangerous objects.

NOTE: Auto Guidance is available with premium charts, in some

areas.

Before you can navigate to a waypoint, you must create a

waypoint.

1Select Info > User Data > Waypoints.

2Select a waypoint.

3Select Navigate To.

4Select an option:

• To navigate directly to the location, select Go To.

• To create a route to the location, including turns, select

Route To.

• To use Auto Guidance, select Auto Guidance.

5Review the course indicated by the magenta line.

NOTE: When using Auto Guidance, a gray segment within

any part of the magenta line indicates that Auto Guidance

Navigation with a Chartplotter 11

cannot calculate part of the Auto Guidance line. This is due to

the settings for minimum safe water depth and minimum safe

obstacle height.

6Follow the magenta line, steering to avoid land, shallow

water, and other obstacles.

Deleting a Waypoint or an MOB

1Select Info > User Data > Waypoints.

2Select a waypoint or an MOB.

3Select Review > Delete.

Deleting All Waypoints

Select Info > User Data > Clear User Data > Waypoints >

All.

Setting and Following a Direct Course Using Go To

CAUTION

When using Go To, a direct course and a corrected course may

pass over land or shallow water. Use visual sightings, and steer

to avoid land, shallow water, and other dangerous objects.

You can set and follow a direct course from your current location

to a selected destination.

1Select a destination (Destinations, page 11).

2Select Navigate To > Go To.

A magenta line appears. In the center of the magenta line is

a thinner purple line that represents the corrected course

from your current location to the destination. The corrected

course is dynamic, and it moves with your boat when you are

off course.

3Follow the magenta line, steering to avoid land, shallow

water, and other obstacles.

4If you are off course, follow the purple line (corrected course)

to go to your destination, or steer back to the magenta line

(direct course).

Routes

Creating and Navigating a Route From Your Present

Location

You can create and immediately navigate a route on the

Navigation chart or the Fishing chart. This procedure does not

save the route or the waypoint data.

NOTE: The offshore Fishing chart is available with premium

charts, in some areas.

1From the Navigation chart or Fishing chart, select a

destination.

2Select Navigate To > Route To.

3Select the location of the last turn before the destination.

4Select Add Turn.

5If necessary, repeat step 3 and 4 to add additional turns,

working backward from the destination to the present location

of your vessel.

The last turn you add should be the first turn you make,

starting from your present location. It should be the turn

closest to your vessel.

6If necessary, select Menu.

7Select Navigate Route.

8Review the course indicated by the magenta line.

9Follow the magenta line, steering to avoid land, shallow

water, and other obstacles.

Creating and Saving a Route

This procedure saves the route and all the waypoints in it. The

starting point can be your present location or another location.

1Select Info > User Data > Routes & Auto Guidance Paths

> New > Route Using Chart.

2Select the starting location of the route.

3Select Add Turn.

4Select the location of the next turn on the chart.

5Select Add Turn.

The chartplotter marks the location of the turn with a

waypoint.

6If necessary, repeat steps 4 and 5 to add more turns.

7Select the final destination.

Viewing a List of Routes and Auto Guidance Paths

1Select Info > User Data > Routes & Auto Guidance Paths.

2If necessary, select Filter to see routes only or Auto

Guidance paths only.

Editing a Saved Route

You can change the name of a route or change the turns the

route contains.

1Select Info > User Data > Routes & Auto Guidance Paths.

2Select a route.

3Select Review > Edit Route.

4Select an option:

• To change the name, select Name, and enter the name.

• To select a waypoint from the turn list, select Edit Turns >

Use Turn List, and select a waypoint from the list.

• To select a turn using the chart, select Edit Turns > Use

Chart, and select a location on the chart.

Browsing for and Navigating a Saved Route

Before you can browse a list of routes and navigate to one of

them, you must create and save at least one route.

1Select Info > User Data > Routes & Auto Guidance Paths.

2Select a route.

3Select Navigate To.

4Select an option:

• To navigate the route from the starting point used when

the route was created, select Forward.

• To navigate the route from the destination point used

when the route was created, select Backward.

A magenta line appears. In the center of the magenta line is

a thinner purple line that represents the corrected course

from your present location to the destination. The corrected

course is dynamic, and it moves with your boat when you are

off course.

5Review the course indicated by the magenta line.

6Follow the magenta line along each leg in the route, steering

to avoid land, shallow water, and other obstacles.

7If you are off course, follow the purple line (corrected course)

to go to your destination, or steer back to the magenta line

(direct course).

Browsing for and Navigating Parallel to a Saved

Route

Before you can browse a list of routes and navigate to one of

them, you must create and save at least one route.

1Select Info > User Data > Routes & Auto Guidance Paths.

2Select a route.

3Select Navigate To.

4Select Offset to navigate parallel to the route, offset from it

by a specific distance.

12 Navigation with a Chartplotter

This manual suits for next models

Table of contents

Other Garmin GPS manuals

Garmin

Garmin GPSMAP 620 User manual

Garmin

Garmin aera 796 Manual

Garmin

Garmin nuvi 500 Series User manual

Garmin

Garmin Quest TM User manual

Garmin

Garmin GPS 19x NMEA 0183 User manual

Garmin

Garmin GPS 76 User manual

Garmin

Garmin GPSMAP 176 User manual

Garmin

Garmin nuvi nuvi750 User manual

Garmin

Garmin APPROACH CT10 User manual

Garmin

Garmin Cessna Caravan G1000 Manual

Garmin

Garmin eTrex eTrex User manual

Garmin

Garmin GTN 6 series User manual

Garmin

Garmin AERA 660 Instruction manual

Garmin

Garmin GPS 95 STD Personal Navigator User manual

Garmin

Garmin NUVI R NVI 200 User manual

Garmin

Garmin GPSMAP 78 series User manual

Garmin

Garmin GPS GPS 60 User manual

Garmin

Garmin GPSMAP 176 User manual

Garmin

Garmin nuvi 310 User manual

Garmin

Garmin GPS 150 Manual

Garmin

Garmin GPSMAP 180 User manual

Garmin

Garmin Zumo Audible User manual

Garmin

Garmin ECHOMAP UHD2 5X User manual

Garmin

Garmin GPSMAP 76 series Reference guide

Popular GPS manuals by other brands

Icar

Icar IK115 user manual

RoyalTek

RoyalTek RFG-1000 user manual

ZENEC

ZENEC ZE-NA2000N Software manual

Jensen

Jensen NAV102 installation guide

Mappy

Mappy mini 250SA manual

SMART

SMART GT07 user manual

Magellan

Magellan Triton 200 - Hiking GPS Receiver Brochure & specs

TomTom

TomTom GO 6200 troubleshooting guide

Audiovox

Audiovox SDB45 owner's manual

Kenwood

Kenwood DNX210EX installation manual

Whistler

Whistler GPSMOD2 user manual

Wintec

Wintec G-Trender II WSG-2000 user manual

FUNNY AUTO

FUNNY AUTO LK960 quick guide

Spectrum

Spectrum VT04 user manual

CUBE Tracker

CUBE Tracker Cube PRO instructions

Enfora

Enfora MT 3050 user guide

Cellsafe

Cellsafe GPS Smart Tracker SOS pendant Quick reference user guide

Topten

Topten TK310 user manual

Garmin GPSMAP 8012 User manual

Popular GPS manuals by other brands