Garmin OVERLANDER User manual

OVERLANDER™
Owner’s manual

© 2019 Garmin Ltd. or its subsidiaries
All rights reserved. Under the copyright laws, this manual may not be copied, in whole or in part, without the written consent of Garmin. Garmin reserves the right to change or
improve its products and to make changes in the content of this manual without obligation to notify any person or organisation of such changes or improvements. Go to
www.garmin.com for current updates and additional information concerning the use of this product.
Garmin®, the Garmin logo, Fusion® and inReach® are trademarks of Garmin Ltd. or its subsidiaries, registered in the USA and other countries. BC™, Fusion-Link™, Garmin Express™,
Garmin Explore™, Garmin PowerSwitch™, myTrends™ and Overlander™ are trademarks of Garmin Ltd. or its subsidiaries. These trademarks may not be used without the express
permission of Garmin.
Android™ is a trademark of Google Inc. Apple®, iPhone® and Mac® are trademarks of Apple Inc., registered in the U.S. and other countries. The Bluetooth® word mark and logos are
owned by the Bluetooth SIG, Inc., and any use of such name by Garmin is under licence. Foursquare® is a trademark of Foursquare Labs, Inc. in the U.S. and in other countries. HD
Radio™ Technology manufactured under licence from iBiquity Digital Corporation. For patents see http://patents.dts.com/. HD Radio™ and the HD, HD Radio and "Arc" logos are
registered trademarks or trademarks of iBiquity Digital Corporation in the United States and/or other countries. HISTORY® and the H logo are trademarks of A+E Networks and are
protected in the United States and other countries around the globe. All Rights Reserved. Used with Permission. iOverlander™ is a trademark of iOverlander. microSD® is a trademark
of SD-3C. PlanRV™ is the trademark of TruckDown Info International, Inc. TripAdvisor® is a registered trademark of TripAdvisor LLC. Ultimate Campgrounds is a trademark of The
Ultimate Public Campground Project. Wi‑Fi® is a registered trademark of Wi-Fi Alliance. Windows® is a registered trademark of Microsoft Corporation in the United States and other
countries.

Table of contents
Getting started................................. 1
Device Overview...................................... 1
Mounting and Powering the Device in
Your Vehicle.............................................3
Installing the Ball Mount Adapter....... 5
Turning the device on or off................... 6
Acquiring GPS signals.............................6
Home Screen........................................... 7
Opening an App................................... 7
Adding Shortcuts to the Home
Screen.................................................. 7
Viewing Notifications.......................... 8
Status bar icons...................................8
Using the Touchscreen........................... 8
Adjusting the screen brightness............ 8
Vehicle Profiles................................ 9
Car Profile................................................ 9
Adding a vehicle profile.......................... 9
Switching the Vehicle Profile.................. 9
Editing a vehicle profile........................... 9
Driver awareness features and
alerts..............................................10
Enabling or disabling audible driver
alerts...................................................... 10
Red light and speed cameras............... 10
Street Navigation............................11
Routes.................................................... 11
Starting a route......................................11
Starting a route by using the map.... 11
Going home....................................... 11
Editing your home location........... 11
Your route on the map.......................... 12
Active lane guidance......................... 13
Viewing turns and directions............ 13
Viewing the Entire Route on the
Map.................................................... 13
Arriving at your destination.................. 13
Parking Near Your Destination......... 14
Changing Your Active Route.................14
Adding a location to your route........ 14
Shaping your route............................ 14
Taking a detour..................................15
Changing the route calculation
mode.................................................. 15
Stopping the route.................................15
Using Suggested Routes...................... 15
Avoiding Delays, Tolls and Areas......... 15
Avoiding traffic delays on your
route................................................... 15
Avoiding toll roads............................ 16
Avoiding toll stickers......................... 16
Avoiding road features......................16
Avoiding environmental zones......... 16
Custom Avoidances.......................... 16
Avoiding a road.............................. 17
Avoiding an area............................ 17
Disabling a custom avoidance..... 17
Deleting custom avoidances........ 17
Finding and saving locations.......... 17
Points of Interest...................................17
Navigating to a Garmin Explore
Location............................................. 18
Finding a location by category......... 18
Searching within a category......... 18
Finding Campsites............................ 18
Finding Motor Home parks........... 18
Finding Ultimate Campgrounds points
of interest...........................................18
Finding Motor Home services.......... 18
Finding National Parks...................... 19
Exploring National Park Features
and Amenities................................ 19
Finding iOverlander™ points
of interest...........................................19
Finding HISTORY® points
of interest...........................................19
Foursquare.........................................19
Searching Foursquare points of
interest........................................... 20
TripAdvisor®..................................... 20
Finding TripAdvisor points of
interest........................................... 20
Navigating to points of interest within
a venue............................................... 20
Exploring a venue.......................... 20
Finding a location using the search
bar.......................................................... 21
Finding an address................................21
Location Search Results....................... 22
Table of contents i

Location Search Results on the
Map.................................................... 23
Changing the search area.....................24
Custom points of interest..................... 24
Installing POI Loader......................... 24
Finding custom POIs......................... 24
Parking................................................... 24
Finding Parking Near Your Current
Location............................................. 25
Understanding Parking Colours and
Symbols............................................. 25
Search tools...........................................25
Finding a junction.............................. 25
Finding a location using
coordinates........................................ 25
Viewing history...................................... 25
Clearing the list of recently found
places................................................. 25
Viewing current location information.. 25
Finding emergency services and
fuel..................................................... 26
Getting directions to your current
location.............................................. 26
Adding a shortcut.................................. 26
Removing a shortcut......................... 26
Saving Locations................................... 26
Saving a location............................... 26
Saving your current location............. 26
Editing a Saved Location.................. 27
Assigning Categories to a Saved
Location............................................. 27
Deleting a favourite location.............27
Using the Street Map...................... 27
Map Tools.............................................. 28
Viewing a map tool............................28
Up ahead................................................ 28
Viewing upcoming locations............ 28
Customising the up ahead
categories.......................................... 29
Warning and alert symbols................... 29
Restriction Warnings......................... 30
Road condition warnings.................. 30
Alerts.................................................. 31
Trip information.................................... 31
Viewing trip data from the map........ 31
Customising the trip data fields... 31
Viewing the trip information page.... 31
Viewing the trip log............................31
Resetting trip information................. 31
Viewing upcoming traffic..................... 31
Viewing traffic on the map............... 32
Searching for traffic incidents.......... 32
Customising the map............................32
Customising the map layers............. 32
Changing the map data field............ 32
Changing the map perspective.........32
Off-Road Navigation....................... 33
Garmin Explore...................................... 33
Logging in to a Garmin Explore
Account.............................................. 34
Map.................................................... 34
Downloading Garmin Explore
Maps...............................................34
Filtering Map Data......................... 34
Garmin Explore Map Settings....... 34
Creating a Waypoint...................... 35
Create a Route............................... 35
Library................................................ 35
Viewing Your Library..................... 35
Navigating to a favourite
location.......................................... 35
Creating a Collection..................... 35
Viewing Collections....................... 35
Synchronising Garmin Explore
Account Data..................................... 36
Importing GPX Files with a Memory
Card.................................................... 36
Exporting GPX Files with a Memory
Card.................................................... 36
Recording Tracks.................................. 36
Changing Tracking Intervals............. 36
Stopping Tracking............................. 37
Pitch and Roll........................................ 37
Calibrating Pitch and Roll................. 37
Adjusting Warning Angles................ 37
Enabling or Disabling Warning Angle
Alerts.................................................. 37
Viewing the Altimeter, Barometer and
Compass................................................37
Calibrating the compass................... 38
inReach Remote............................. 38
Connecting an inReach Device.............38
ii Table of contents

Sending an inReach Message.............. 38
SOS.........................................................38
Initiating an SOS Rescue...................39
Cancelling an SOS Rescue................ 39
Hands-free calling.......................... 39
Pairing your phone................................ 39
Tips after pairing the devices........... 40
Pairing Additional Bluetooth
Devices...............................................40
Placing a call......................................... 40
Receiving a call......................................40
Using in-call options..............................40
Saving a Phone Number as a Preset... 40
Disconnecting a Bluetooth device....... 41
Deleting a paired Bluetooth device...... 41
Deleting a paired phone........................ 41
Traffic............................................ 41
Receiving traffic data using a traffic
receiver.................................................. 41
Enabling traffic...................................... 42
Viewing traffic on the map................... 42
Searching for traffic incidents.......... 42
Voice Command............................. 42
Setting the wake-up phrase.................. 42
Activating voice command................... 42
Voice Command tips............................ 42
Starting a route using Voice
command...............................................43
Muting Instructions............................... 43
Using the apps................................43
Viewing the Owner's Manual on
Your Device............................................43
Viewing Previous Routes and
Destinations.......................................... 43
Fusion-Link™ Wireless Remote Control
App......................................................... 43
Connecting to a Stereo Using
Bluetooth............................................43
Connecting to a Stereo Using a
Wireless Network.............................. 44
Music Playback................................. 44
Playing music................................ 44
Selecting a Source......................... 44
Playback Controls......................... 44
Audio Control..................................... 45
Adjusting the Volume for a Zone..45
Adjusting the Tones...................... 45
Disabling the Loud Setting for a
Zone............................................... 45
Adjusting the Gain for an Auxiliary
Device............................................. 45
Speaker Zones............................... 45
DSP Settings.................................. 46
Presets............................................... 46
Saving a Station as a Preset......... 46
Selecting a Preset from a List...... 46
Removing Presets......................... 46
Audio Settings................................... 47
Speaker Zone Settings.................. 47
Garmin PowerSwitch™ App.................. 48
Activating a Power Switch................ 48
Turning Off All Switches................... 48
Customising a Button....................... 49
Assigning a Switch to a Control
Input................................................... 49
Adding a Custom Layout.................. 49
Adding a Button to a Custom
Layout.............................................50
Arranging Buttons In a Custom
Layout.............................................50
Deleting a Custom Layout or
Button............................................. 50
Overlander settings........................ 51
Navigation settings............................... 51
Map and vehicle settings.................. 51
Enabling maps............................... 51
Route Preference Settings................ 51
Driver Assistance Settings................52
Traffic Settings.................................. 52
Enabling Bluetooth wireless
technology............................................. 52
Connecting to a Wireless Network.......52
Display settings..................................... 52
Sound and Notification Settings.......... 53
Adjusting Sound and Notification
Volume............................................... 53
Enabling or Disabling Location
Services................................................. 53
Setting the Text Language....................53
Date and time settings..........................53
Table of contents iii

Device settings...................................... 53
Restoring settings................................. 53
Resetting Data and Settings................. 54
Device information......................... 54
Viewing E-label Regulatory and
Compliance Information....................... 54
Specifications........................................54
Charging the Device.............................. 54
Device maintenance....................... 54
Garmin Support Centre......................... 54
Updating Maps and Software Using a
Wi‑Fi Network........................................ 55
Updating Maps and Software with
Garmin Express..................................... 56
Installing Garmin Express................. 57
Device Care............................................57
Cleaning the outer casing................. 57
Cleaning the Touchscreen................ 57
Avoiding theft.................................... 57
Changing the Fuse in the Vehicle Power
Cable...................................................... 58
Resetting the device..............................58
Removing the Device, Mount and Suction
Cup......................................................... 58
Removing the Mount from the Suction
Cup..................................................... 58
Removing the Suction Cup from the
Windscreen........................................ 58
Troubleshooting............................. 58
The suction cup will not stay on my
windscreen............................................ 58
The mount does not hold my device in
place while I drive..................................59
My device is not acquiring satellite
signals....................................................59
The device does not charge in my
vehicle.................................................... 59
My battery does not stay charged for
very long................................................ 59
My device does not connect to my
phone..................................................... 59
Appendix........................................ 60
Garmin PowerSwitch............................ 60
Mounting Considerations................. 60
Mounting the Device......................... 60
Opening the Front Cover................... 61
Connecting Accessories................... 62
Connecting a Control Input............... 63
Connecting the Device to Vehicle
Power................................................. 63
Pairing with a Garmin Navigation
Device.................................................64
Garmin PowerSwitch
Specifications.................................... 64
Troubleshooting................................ 64
My Garmin PowerSwitch will not
stay connected.............................. 64
My accessories are not receiving
power..............................................64
Backup Cameras................................... 64
Pairing a BC™ 35 Backup Camera with
a Garmin Navigation Device............. 65
Viewing the Backup Camera............ 65
Switching Cameras....................... 65
Changing the Camera
Orientation..................................... 66
Connecting to a Wireless Display........ 66
Data management................................ 66
About memory cards........................ 66
Installing a memory card for maps and
data.................................................... 66
Formatting the Memory Card........... 66
Connecting the Device to Your
Computer........................................... 67
Transferring data from your
computer............................................67
Purchasing additional maps.................67
Purchasing accessories....................... 67
iv Table of contents

Getting started
WARNING
See the Important safety and product information guide in the product box for product warnings and other
important information.
1Update the maps and software on your device (Updating Maps and Software Using a Wi‑Fi Network,
page 55).
2Set up a Garmin Explore™ account (Garmin Explore, page 33).
3Mount the device in your vehicle and connect it to power (Mounting and Powering the Device in Your Vehicle,
page 3).
4Set up a vehicle profile (Vehicle Profiles, page 9).
5Navigate to your destination (Starting a route, page 11).
Device Overview
Getting started 1

Microphone for hands-free calling
Volume control
power key
Micro USB power and data port
Map and data memory card slot
3.5mm audio jack
Magnetic mount interface with 14 pin connector
Speaker
2 Getting started

Mounting and Powering the Device in Your Vehicle
WARNING
This product contains a lithium-ion battery. To prevent the possibility of personal injury or product damage
caused by battery exposure to extreme heat, store the device out of direct sunlight.
Both the device and its mount contain magnets. Under certain circumstances, magnets may cause interference
with some internal medical devices and electronic devices, including pacemakers, insulin pumps or hard drives
in laptop computers. Keep the device away from medical devices and electronic devices.
Before you use your device on battery power, you should charge it.
1Open the lever , press the suction cup to the windscreen and flip the lever back towards the windscreen.
The lever must be oriented towards the top of the windshield.
2Plug the vehicle power cable into the port on the mount.
Getting started 3

3If necessary, loosen the thumbscrew on the suction cup arm and the nut on the ball mount , and adjust
the mount for better viewing and operation.
4Tighten the thumbscrew on the suction cup arm and the nut on the ball mount.
5Place the device onto the magnetic mount.
6Plug the other end of the vehicle power cable into a power outlet in your vehicle.
4 Getting started

Installing the Ball Mount Adapter
Your device includes a one-inch ball mount that is compatible with third-party mounting solutions.
1Remove the four screws securing the mount socket to the magnetic mount.
2Remove the mount socket.
3Secure the one-inch ball mount to the magnetic mount using the screws removed in step 1.
Getting started 5

Turning the device on or off
• To turn the device on, press the power key or connect the device to power.
• To put the device in power saving mode, press the power key while the device is on.
While in power saving mode, the screen is off and the device uses very little power, but it can wake instantly
for use.
TIP: you can charge your device faster by putting it in power saving mode while charging the battery.
• To turn off the device completely, hold the power key until a prompt appears on the screen, then select Power
Off.
Acquiring GPS signals
When you turn on your navigation device, the GPS receiver must collect satellite data and establish the current
location. The time required to acquire satellite signals varies based on several factors, including how far you are
from the location where you last used your navigation device, whether you have a clear view of the sky, and how
long it has been since you last used your navigation device. The first time you turn on your navigation device, it
may take several minutes to acquire satellite signals.
1Turn on the device.
2Verify appears in the status bar. Enable location services if it does not.
3If necessary, go to an open area with a clear view of the sky, away from tall buildings and trees.
Acquiring Satellites appears at the top of the navigation map until the device determines your location.
6 Getting started

Home Screen
NOTE: the home screen layout may vary if it has been customised.
Swipe down to view notifications.
Swipe down twice to quickly change settings and backlight brightness.
Hold to customise the wallpaper or add widgets to the home screen.
Select to view road navigation features and search for points of interest.
Select to view the Garmin Explore app, which provides off-road navigation information and detailed topo
graphical maps.
Select to open the app drawer. The app drawer contains shortcuts to all the apps installed on your device.
Opening an App
The home screen contains shortcuts for frequently used apps. The app drawer contains all the apps installed on
your device, organised into three tabs. The Drive tab contains apps useful for street navigation and various
automotive needs. The Explore tab contains apps useful for off-road navigation and exploration. The Tools tab
contains apps useful for communication and other tasks.
Select an option to start an app:
• Select an app shortcut from the home screen.
• Select , select a tab and select an app.
Adding Shortcuts to the Home Screen
1Select .
2Select an app tab to view additional applications.
3Hold an application, and drag it to a location on the home screen.
Getting started 7

Viewing Notifications
1Swipe down from the top of the screen.
The list of notifications appears.
2Select an option:
• To launch the action or app mentioned in the notification, select the notification.
• To dismiss a notification, swipe the notification to the right.
Status bar icons
The status bar is located at the top of the main menu. The status bar icons display information about features
on the device.
Location services is enabled.
Bluetooth® technology is enabled.
Connected to a Bluetooth device.
Connected to a Wi‑Fi® network (Connecting to a Wireless Network, page 52).
Active vehicle profile. Swipe down twice and select to view the vehicle profile settings (Vehicle Profiles,
page 9).
Battery charge level.
Using the Touchscreen
• Tap the screen to select an item.
• Drag or swipe your finger across the screen to pan or scroll.
• Pinch two fingers together to zoom out.
• Spread two fingers apart to zoom in.
Adjusting the screen brightness
The device can use an ambient light sensor to adjust the screen brightness to your vehicle conditions
automatically (Display settings, page 52). You can also adjust the brightness manually using either the
notification panel or the settings menu.
1Select an option:
• Swipe down twice from the top of the screen to expand the quick settings in the notification panel.
• Select > Display > Brightness Level.
2Use the slider bar to adjust the brightness.
8 Getting started

Vehicle Profiles
WARNING
Entering your vehicle profile characteristics does not guarantee that your vehicle's characteristics will be
accounted for in all route suggestions or that you will receive the warning icons in all cases. Limitations may
exist in the map data such that your device cannot account for these restrictions or road conditions in all cases.
Always defer to all posted road signs and road conditions when making driving decisions.
Routing and navigation are calculated differently based on your vehicle profile. The activated vehicle profile is
indicated by an icon in the status bar. The navigation and map settings on your device can be customised
separately for each vehicle type.
When you activate a camper vehicle profile, the device avoids including restricted or impassable areas in routes
based on the dimensions, weight and other characteristics you entered for your vehicle.
Car Profile
The car profile is a preloaded vehicle profile intended for use in an automobile without a trailer. While using the
car profile, the device calculates standard automobile routes, and routing for large vehicles is not available.
Some features and settings specific to large vehicles are not available while using the car profile.
Adding a vehicle profile
The vehicle profile is an optional feature that provides routing based on the height and weight of large vehicles,
such as campers or trailers. If you have a large vehicle or if you are towing a trailer, you should set up a vehicle
profile. You can set a vehicle profile for each vehicle configuration used with your Overlander device.
1Select > > Vehicle Profile > .
2Select a vehicle option that most closely resembles your vehicle configuration.
3Follow the on-screen instructions to enter the vehicle characteristics.
Switching the Vehicle Profile
The first time you turn on your device, it prompts you to select a vehicle profile. You can manually switch to
another vehicle profile at any time.
1Select an option:
• Swipe down twice from the top of the screen and select the vehicle profile icon, such as or .
• Select > Navigation > Vehicle Profile.
2Select a vehicle profile.
The vehicle profile information appears, including measurements and weight.
3Select Select.
Editing a vehicle profile
You can change basic vehicle profile information or add detailed information to a vehicle profile, such as
maximum speed.
1Select > Navigation > Vehicle Profile.
2Select the vehicle profile to edit.
3Select an option:
• To edit the vehicle profile information, select , and select a field to edit.
• To rename a vehicle profile, select > > Rename Profile.
• To delete the vehicle profile, select > > Delete.
Vehicle Profiles 9

Driver awareness features and alerts
CAUTION
The driver alerts and speed limit features are for information only. They do not replace your responsibility to
abide by all posted speed limit signs and to use safe driving judgement at all times. Garmin® is not responsible
for any traffic fines or citations that you receive for failing to follow all applicable traffic laws and signs.
Your device provides features that can help encourage safer driving and increase efficiency, even when you are
driving in a familiar area. The device plays an audible tone or message and displays information for each alert.
You can enable or disable the audible tone for some types of driver alerts. Not all alerts are available in all areas.
Schools: the device plays a tone and displays the speed limit (if available) for an upcoming school or school
zone.
Speed limit exceeded: the device plays a tone and displays a red border on the speed limit icon when you
exceed the posted speed limit for the current road.
Speed limit change: the device plays a tone and displays the upcoming speed limit so you can be prepared to
adjust your speed.
Level crossing: the device plays a tone to indicate an upcoming level crossing.
Animal crossing: the device plays a tone to indicate an upcoming animal crossing area.
Bends: the device plays a tone to indicate a curve in the road.
Slower traffic: the device plays a tone to indicate slower traffic when you approach slower traffic at a higher
speed. Your device must be receiving traffic information to use this feature (Traffic, page 41).
Risk of grounding: the device plays a tone and displays a message when you approach a road where your
vehicle could become grounded.
Lateral wind: the device plays a tone and displays a message when you approach a road where there is risk of
lateral wind.
Narrow road: the device plays a tone and displays a message when you approach a road that may be too narrow
for your vehicle.
Steep hill: the device plays a tone and displays a message when you approach a steep hill.
County and country borders: the device plays a tone and displays a message when you approach the border of
a county or country.
Shut off propane: the device plays a tone and displays a message when you approach an area where propane
should be turned off.
Enabling or disabling audible driver alerts
You can enable or disable the audible tone for some types of driver alerts. The visual alert appears even when
the tone is disabled.
1Select > Navigation > Driver Assistance > Audible Driver Alerts.
2Select or clear the tick box next to each alert.
Red light and speed cameras
NOTICE
Garmin is not responsible for the accuracy of or the consequences of using a red light or speed camera
database.
NOTE: this feature is not available for all regions or product models.
Information about red light and speed camera locations is available in some areas for some product models.
The device alerts you when you approach a reported speed or red light camera.
• You can use the Garmin Express™ software (garmin.com/express) to update the camera database stored on
your device. You should update your device frequently to receive the most up-to-date camera information.
10 Driver awareness features and alerts

Street Navigation
Routes
A route is a path from your current location to one or more destinations.
• The device calculates a recommended route to your destination based on the preferences you set, including
the route calculation mode (Changing the route calculation mode, page 15) and avoidances (Avoiding Delays,
Tolls and Areas, page 15).
• The device can automatically avoid roads that are not appropriate for the active vehicle profile.
• You can start navigating to your destination quickly using the recommended route, or you can select an
alternative route (Starting a route, page 11).
• If there are specific roads you need to use or avoid, you can customise the route.
• You can add multiple destinations to a route.
Starting a route
1Select , and search for a location.
2Select a location.
3Select an option:
• To start navigating using the recommended route, select Go!.
• To choose an alternative route, select and select a route.
Alternative routes appear to the right of the map.
• To edit the course of the route, select > Edit Route and add shaping points to the route.
The device calculates a route to the location and guides you using voice prompts and information on the map
(Your route on the map, page 12). A preview of the major roads in your route appears at the edge of the map for
several seconds.
If you need to stop at additional destinations, you can add the locations to your route.
Starting a route by using the map
You can start a route by selecting a location from the map.
1Select Drive.
2Drag and zoom the map to display the area to search.
3If necessary, select to filter the displayed points of interest by category.
Location markers ( or a blue dot) appear on the map.
4Select an option:
• Select a location marker.
• Select a point, such as a street, junction or address location.
5Select Go!.
Going home
The first time you start a route home, the device prompts you to enter your home location.
1Select > Go Home.
2If necessary, enter your home location.
Editing your home location
1Select > > Set Home Location.
2Enter your home location.
Street Navigation 11

Your route on the map
As you travel, the device guides you to your destination using voice prompts and information on the map.
Instructions for your next turn, exit or other action appear across the top of the map.
Next action in the route. Indicates the next turn, exit, or other action and the lane in which you should
travel, if available.
Distance to the next action.
Name of the street or exit associated with the next action.
Opens the Garmin Explore app for off-road navigation.
Route highlighted on the map.
Next action in the route. Arrows on the map indicate the location of upcoming actions.
Vehicle speed.
Name of the road on which you are travelling.
Estimated arrival time.
TIP: you can touch this field to change the information it shows.
Map layers. Allows you to add map layers such as topographic and BirdsEye imagery to your map view.
Select to start a new route or search for points of interest.
12 Street Navigation

Map tools. Provides tools to show you more information about your route and surroundings.
Active lane guidance
As you approach some turns, exits, or interchanges in your route, a detailed simulation of the road appears
beside the map, if available. A coloured line indicates the proper lane for the turn.
Viewing turns and directions
While navigating a route, you can view upcoming turns, lane changes, or other directions for your route.
1From the map, select an option:
• To view upcoming turns and directions as you navigate, select > Turns.
The map tool displays the next four turns or directions beside the map. The list updates automatically as
you navigate the route.
• To view the complete list of turns and directions for the entire route, select the text bar at the top of the
map.
2Select a turn or direction (optional).
Detailed information appears. An image of the junction may appear for junctions on major roads, if available.
Viewing the Entire Route on the Map
1While navigating a route, select anywhere on the map.
2Select .
Arriving at your destination
When you approach your destination, the device provides information to help you complete your route.
• indicates the location of your destination on the map, and a voice prompt announces you are approaching
your destination.
• When you approach some destinations, the device automatically prompts you to search for parking. You can
select Yes to find nearby parking areas (Parking Near Your Destination, page 14).
• When you stop at your destination, the device automatically ends the route. If the device does not detect your
arrival automatically, you can select Stop to end your route.
Street Navigation 13

Parking Near Your Destination
Your device can help you find a parking spot near your destination. When you approach some destinations, the
device automatically prompts you to search for parking.
1Select an option:
• When the device prompts you, select Yes to search for nearby parking.
• If the device does not prompt you, select > Categories > Parking, and select > My Destination.
2Select Filter Parking, and select one or more categories to filter parking by availability, type, price, or
payment methods (optional).
NOTE: detailed parking data is not available in all areas or for all parking locations.
3Select a parking location, and select Go! > Add As Next Stop.
The device guides you to the parking area.
Changing Your Active Route
Adding a location to your route
Before you can add a location to your route, you must be navigating a route (Starting a route, page 11).
You can add locations to the middle or end of your route. For example, you can add a petrol station as the next
destination in your route.
1From the map, select > .
2Search for a location.
3Select a location.
4Select Go!.
5Select an option:
• To add the location as the next destination in your route, select Add As Next Stop.
• To add the location to the end of your route, select Add As Last Stop.
• To add the location and edit the order of destinations in your route, select Add to Active Route.
The device re-calculates the route to include the added location and guides you to the destinations in order.
Shaping your route
Before you can shape your route, you must start a route (Starting a route, page 11).
You can manually shape your route to change its course. This allows you to direct the route to use a certain
road or go through a certain area without adding a destination to the route.
1Touch anywhere on the map.
2Select .
The device enters route shaping mode.
3Select a location on the map.
TIP: you can select to zoom in on the map and select a more precise location.
The device recalculates the route to travel through the selected location.
4If necessary, select an option:
• To add more shaping points to the route, select additional locations on the map.
• To remove a shaping point, select .
5When you are finished shaping the route, select Go!.
14 Street Navigation